Used Tying for sale (313)

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #511 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure jetting and suction pressure tank superstructure, ADR Type K 14.0 / 28 PE Superstructure by KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material: S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle, Type K 14.0 / 28 PE * Telescopic plunger with 3 locking positions * (3,300 l water / 10,600 l sludge; 5,500 l water / 8,200 l sludge; 7,700 l water / 6,000 l sludge) * Suction from open bodies of water possible – "comfort version" with cassette boom and integrated filter * ADR tank equipment – category AT/FL L4BH * EMPTYING: by pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for returning dirty water via the boom to the sewer. Vacuum system CVS VacuStar 1600 approx. 1,550 m³/h at 400 bar * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Parallel guidance of suction and high-pressure hose via boom * Hydraulic suction hose reel on the right with 30 m DN 75 (fully passable) High-pressure system Uraca KD 718 approx. 315 l/min at 170 bar * Large HP hose reel for 240 m 1" DN 25, swivels 180° * Equipped with 160 m DN25 * Small HP hose reel for 80 m DN 13, hydraulic * Equipped with 80 m DN13 Special features of hose storage cassette with telescopic boom DN 125 * Infinitely variable hydraulic height adjustment of suction hose via roller carriage * Hydraulic and telescoping suction hose boom, swivels 180° * ADR version L4BH, category FL incl. EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED area lighting * Remote operation of working functions via CAN-BUS technology Gtedpoxc Szisfx Admst * Radio remote control with 14 functions * Hand washing facility (heated) * Large compartment at the rear left, e.g., for a push camera * Rear-view camera with 7" color monitor incl. day/night mode * Sound insulation for pump compartment * Large equipment box * Toolbox * Holder for traffic cones * Vice * Ladder * Large advertising panels on right and left Special equipment: Chassis covers, axle load measuring device, front axle load 9.0 t, driver’s airbag, 220 Ah battery, battery disconnect switch, standard and DuoMatic brake connections, interactive multimedia cockpit, air horn, electrical pre-installation in cab 24V/100A, driver assistance systems: high beam assist and cornering light, traffic sign recognition, suspension: 9.0 t front springs, 4-leaf, tinted windshield with shading strip, ADR hazardous goods version type FL, 150 A generator, speed limiter system, 16-speed gearbox – type G 280-16, rear axle ring gear 300, cab air filter for construction vehicles, 3-piece mudguards, 3-piece mudguards with splash guards, 330 l aluminum fuel tank, left, cooling system for hot climates, trailing axle 9 t, steered, relievable, liftable, navigation system, power take-off – cross-splined flange, PTO gearbox-independent and clutch-dependent MB 1.65, programmable special module, frame lowering without residual pressure regulation, frame overhang 1350 mm, smoker package, rain sensor, tire pressure monitoring system, acoustic reversing warning and warning light (external alarm signal) For further detailed information and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Modifications and interim sale excepted.

Condition: excellent (used), Tipper Tie Alpina mod SW 130-S bowl cutter, With tote bin lift + emptying arm Adjustable speed and bowl speed. 6 knife set up. Stainless steel bowl. Gsdex A A Rbopfx Admstt

Condition: new, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, loading space volume: 8 m³, Year of construction: 2025, The Mercedes-Benz Atego 1418 4x2 tanker is a reliable, efficient, and versatile solution for the safe transport of fuels. With its robust chassis, excellent performance, and well-designed safety features, this truck is perfect for fuel delivery in urban, regional, and remote areas. Specifications Mercedes-Benz Atego 1418 4x2 Fuel Tank: - Drive: 4x2 configuration, ideal for on-road and off-road use. - Engine: 4-cylinder in-line LA 132 kW (177 hp) - Transmission: Manual gearbox for optimal control and efficiency. - Load capacity: Suitable for medium loads, MAX. 14 tons. - Suspension: Front suspension 4.7T parabolic – Rear suspension 9.6T short trapezoidal 2-stage - Suspension: - Rear spring, 9.6T trapezoidal, short, 2-stage Fuel tank: - 8,000 ltr + 5% expansion volume - Fuel pump, capacity min. approx. 500 l/min at 5-6 bar - PTO engage/disengage from the cab, pump engage/disengage from the cab - Gravity drainage, via 2 inch with ball valve and cam-lock coupling. - Emptying with pump, via 2 inch with ball valve and coupling with cam-lock. - Top filling (hatch) - 2 x 3 m. - 2-inch pressure or filling hoses with cam-lock couplings. - Overflow valves, pressure regulator, and anti-static devices to ensure safety during use. Applications: Gtsdpexnblzefx Admjt - Delivery of fuel to gas stations. - On-site fuel distribution for agricultural and construction equipment. - Fuel transport in remote areas and difficult terrain. - Ideal for use in and around drilling rigs in cold and warm countries. Sustainability and Safety: The truck complies with international hazardous materials standards (ADR) and is equipped with robust safety features such as ABS, ASR, and fire protection valves. The Mercedes-Benz Atego 1418 4x2 tanker is a reliable and efficient tanker, ideal for the transport of liquid fuels. With a 180 hp engine and 4x2 drive, the Atego provides excellent agility and performance even in urban environments. Thanks to the tank capacity, it is suitable for transporting large quantities of fuel, while the advanced safety system ensures a secure and stable ride. This truck is the perfect choice for companies that want to transport fuels efficiently and safely. = Further information = Year of manufacture: 2025 Usable material: Fuel Number of cylinders: 4 Pump: Yes Hoses: Yes

Condition: refurbished (used), functionality: fully functional, overall weight: 1,500 kg, 250L Spiral mixer 400V 32A Refurbished 2 speed spiral mixing arm and 2 speed bowl Can be operated manually or automatically Automatic with time control. First speed automatically adjustable via time relay minutes and second mixing time so second speed can be set automatically via time relay. Boiler is lifted hydraulically via hydraulic pump. Emptying product via chute. Electric mostly new Machine has had major inspection maintenance general overhaul. Top condition Product slides over product chute Gtodpsfq R N Sjfx Admot Suitable for dough bakery or minced meat kebab mixing

Condition: used, Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baler Paal Konti 325 D/SO, Year of Manufacture 1999 Technical Specifications: Gtjdpox I D N Ssfx Admst Manufacturer: Paal Model: Paal Konti 325 D/SO Year of Manufacture: 1999 Operating Hours: 50,702 Pressing Force: 94 t Total Connected Load: 128 kW Filling Opening: 1020 x 1750 mm Bale Dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale Weight: 525 to 800 kg Transport Dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH) Machine Weight: approx. 28,000 kg Materials: Paper, cardboard, lightweight waste, plastic waste Notes: The baler is currently still in operation. Dismantling is scheduled for January 2026. Inspection under operating conditions is possible. The conveyor belt shown in the images is not included in the scope of delivery. Please note: All technical data are based on the manufacturer’s information. We accept no liability for the stated information or for possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by prior arrangement. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: used, BAG PACKING MACHINE Consists of: Gtedpsu Nu Hvjfx Admet Weighing machine: make Wagner type WAMA-SP Compact, year 1995 Conveyor belt Bag emptying machine: DCE Sintamatic Bag sealing machine: Toss type 780 year 2002 *

Condition: good (used), Bastra 400 Litre Cooking Kettle Cooking kettle Fully stainless steel Tap for fast emptying Gtjdpfx Aoma Skmjdmot Electric Dimensions approx. 1.3 m x 1.3 m x 1 m high

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Gedpevgrh Uefx Admjtt Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: ready for operation (used), functionality: fully functional, The Lutetia T40 tumbler is designed for processing facilities seeking a mixing and marinating solution capable of handling large volumes with outstanding consistency. It offers a meat + brine capacity of 2,000 to 2,200 kg, meeting the demands of high-volume production while preserving product quality. Its internal volume of 3,675 liters provides ample space for product movement and vacuum cycles, resulting in greater marinade absorption and particularly uniform distribution—an essential feature for processes that require strict consistency. The T40’s design optimizes internal product circulation. The product is gently moved, ensuring even contact of all ingredients with the meat pieces. Thanks to its precise geometry and a vessel engineered for heavy loads, the tumbler delivers controlled, uniform mixing while minimizing product collisions and material loss. The generously sized drum facilitates both filling and emptying, speeding up cycle times. Additionally, the option to integrate a hoist with a control panel streamlines handling and improves operator ergonomics during daily operations. The Lutetia T40 tumbler also stands out for its durability. Its stainless steel construction and high-quality finish ensure a long service life, even in environments subject to frequent cleaning. Easy access to components simplifies maintenance and reduces downtime. The 1,110 mm loading height and 1,020 mm discharge height further optimize material flow. This machine is thus a strategic asset for any manufacturing facility looking to ensure marinade consistency, stabilize yields, and guarantee superior product quality day after day. Gtodpox Hxy Nefx Admjt Technical specifications: - Meat + brine capacity: 2,000–2,200 kg - Usable volume: 3,675 L - Operating mode: Rotating vacuum drum - Unloading: High-throughput front mouth - Loading: Compatible with 200 L trolley - Control: Hoist or integrated control cabinet (depending on version) - Drum movement: Slow rotation optimized for marination - Overall dimensions: 3,250 × 1,550 × 1,990 mm - Machine weight: 1,500 kg

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as Cans, PET, Metal Buckets, Metal Containers, but also Plastic Canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Top loading Special Waste Baler User-friendly lever control Automatic bale kicker for easy bale removal Retainers for reducing the material spring back Cross Strapping Tying System to keep difficult materials in bale Reel holder for strapping rolls A quality product “Made in Europe” Suitable for compacting PET bottles Cans and sheet metal containers Canister and plastic containers Cardboard and plastic film and foils Optional Extras Machine colour RAL Gtedpfovbq Rkex Admst Strapping rolls Power supply 380 - 400 V (3 phase) Can Compactor, Can Press, PET Compactor, PET Press, Baler PET bottles, PET Bottle Baler, Ballenpresse, Papierpresse, Altpapierpresse, Kartonpresse, Kartonagenpresse, Folienpresse, Papierballenpresse, Abfall-Ballenpresse, Abfallpresse, Presse Wertstoff, Müllverdichter, Müllpresse, Restmüllpresse

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baler Dixi 60 SLS, Year of manufacture 2013 Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Viewings, including under power, are possible at any time by appointment. Material trials with your production waste can be arranged upon request for a handling fee. Should you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: Gtodpfox Irxuex Admst All technical data is provided as specified by the manufacturer. We do not assume any liability for the information given or for possible errors. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. The sale is ex works, based on advance payment, without warranty or guarantee.

Condition: new, power: 207 kW (281.44 HP), fuel type: diesel, overall weight: 15,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, tail-lift, For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). ---- Iveco Eurocargo ML160E28/P 4x2 Refrigerated Box Truck with Side Door and Tail Lift ---- * Tail Lift: Bär BC 1500S4 (1,500 kg capacity) * Refrigeration Unit: Thermo King T-1200R-50 * KIESLING Refrigerated Body MONOTEMP with Tail Lift as per AN 232393 * Length: 7,400 mm * Width: 2,480 mm * Height: 2,400 mm * Axle configuration: 2 axles, rear-wheel drive * Cab type: Standard cab NS * Engine power: 280 TY * Transmission: ZF automatic 8AP * Gross vehicle weight: 15-16 t * Drive axle: Single reduction, single axle * Rear axle air suspension * Brakes: Disc/disc * Wheelbase: 5,175 mm * Driver drowsiness alert system (Driver Drowsiness Attention Warning) * Standard rear overhang * AdBlue tank heating * Standard braking system * Electronic Stability Program (ESP) * Engine intake air heating for optimal cold start in extreme temperatures * Reversing monitoring system with camera * Blind spot monitoring system (BSIS), right side * Intelligent Speed Assistance (ISA) * Front area monitoring (MOIS) * Pneumatic parking brake * Fuel tank: 200 liters, plastic, lockable * Plastic steering wheel * Heated fuel pre-filter on frame * Standard component positions on chassis * Connection cable for alcohol interlock (ALC) * AdBlue tank, 30 liters * Tire pressure monitoring system (TPMS) with internal sensors * Rear axle ratio: 4.13 * Lane departure warning system (LDWS) * Connectivity box 4G incl. TCO service contract Gjdpfexppz Hex Admstt * Voltage converter 24/12 Volt (10.5 Ampere) * Hill start assist (Hill Holder) for comfortable starts on inclines * Emergency braking assistant (AEBS) * Speed limiter: 90 km/h * Adaptive cruise control (ACC) * Clothes rail on rear cab wall with adjustable hooks * Manual cab tilting device * Warning triangle, specification and dimensions as per ECE-27 * Front headlights: halogen * Standard cab with flat roof * RADIO with Bluetooth, DAB+ and 7-inch display * Rearview mirrors for 2,600 mm body width * Roof hatch, manual * Plastic bumper * Black cab attachments * Cabin interior with fabric lining * Digital tachograph 4.1 * Flat roof in white * Air suspension on rear axle * Parabolic spring on front axle * Wheel chocks, 2 units * Left-hand drive for right-hand traffic * Temperate climate version * Front towing and shunting eye * Front underrun protection for chassis with gross weight over 7,490 kg * Chassis frame in grey * C-profile steel ladder frame * Chassis protective sealant Tectyl 300 G Clear * ZF 8AP1000 AUTOMATIC GEARBOX * Exhaust pipe centered under vehicle * Air filter unit under cab * Emissions standard EURO VI E * NOISE ECE 51/03 * Two-stage engine brake, activated via right steering column lever * Westinghouse brake * Raw air intake without snorkel * Heated air dryer for braking system * Expansion module for PTO controls * Axle load display in cluster * Tires: 305/70R19.5 * LED rear lights * Without battery master switch * Electrical pre-installation for tail lift operation as per VEHH standard * Reversing warning buzzer, can be deactivated * Batteries: 170 Ah for Eurocargo (recommended for use with tail lift and/or PTO) * Preparation for toll system (OBU), including antenna and...

Condition: used, machine/vehicle number: 8427, * Amazone Horse Hopper 1500 Smart Cut * Working width 1.50m * 1,500 l grass catcher capacity * Tractor 3-point hitch * H60 wing blade * Support rollers * Mulching device * PTO shaft with freewheel * Grass catcher with hydraulic bottom emptying * Rotation speed 2650 rpm * Fill level indicator Gsdpforhy H Rsx Admott -----Internal vehicle number: 8427----Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Gjdpfov T I Evsx Admjtt Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: ready for operation (used), functionality: fully functional, The silo system works based on negative pressure and works without any problems. (no transport spindles) The flour is currently conveyed over a length of 30 meters and 2 bends (90 degrees). The filling quantity is regulated by the actual weight in the weighing hopper. The flour silo consists roughly of the following components: +Control (Siemens/Daxner) -with 5-fold component weighing -Recipe storage +Water conveying with temperature control +3 aluminum silos (ATS) -Capacity approx. 5 t each -Modular design to adapt to room height -with aluminum feet -Automatic loosening Gtsdpsv Accnofx Admst The silo tanks are easy to clean (no corners) The silo tanks can be dismantled into individual parts, so removal is absolutely problem-free. + Scale/filling hopper (emptying) + Flour sieving system is integrated into the weighing hopper. + Water tank is located on the weighing hopper The silo can be dismantled from week 11 The silo is fully functional and can be inspected in operation. No guarantee or warranty

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as cans, PET, metal buckets, metal containers, but also plastic canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Top loading Special Waste Baler User-friendly lever control Automatic bale kicker for easy bale removal Retainers for reducing the material spring back Cross Strapping Tying System to keep difficult materials in bale Gtodpfx Asbhy Twsdmet Reel holder for 7 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Cans and sheet metal containers Canister and plastic containers Cardboard and plastic film and foils Optional Extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Can Compactor, Can Press, PET Compactor, PET Press, Baler PET bottles, PET Bottle Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: good (used), Year of construction: 2026, functionality: fully functional, Baler Dixi 60 SLS, Year of manufacture: 2016 Technical specifications: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2016 Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film Gsdpfjx Irxhsx Admjtt The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Inspections, including under power, are possible by appointment at any time. Upon request, we can also carry out tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical information is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. The offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment only, without warranty or guarantee.

Condition: used, mileage: 164,000 km, power: 235 kW (319.51 HP), first registration: 02/2013, fuel type: diesel, empty load weight: 15,690 kg, maximum load weight: 10,310 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,000 mm, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 4, Equipment: ABS, air conditioning, cabin, central locking, cruise control, onboard computer, power assisted steering, soot filter, * German vehicle * Rare as 4 seater * Condition see photos * Body from premium manufacturer Haller with C-Trace Ident System * Cost savings through automatic registered emptying of waste containers and optimization of logistical processes * Haller type M21 x2C * Waste collection container with press * Collection container volume 21 m³ * Zoeller filling * Type Delta 2301 Premium * Suitable for all containers from 80-1,300 liters * L-comfort cab with 4 seats and low entry * Air conditioning * Auxiliary heating Gedpfx Aevhpv Eodmott * Seat heating * leaf air suspension + lifting and lowering * Liftable trailing steering axle * Central lubrication system * Engine brake * Differential lock * Multifunction steering wheel * Cruise control * Reversing camera * Comfort driver's seat, air suspension * Hands-free system * Heated electric mirrors * Electric windows * Sun visor * Wheelbase: 4,000+1,350 mm * max. gross vehicle weight: 26,000 kg * Unladen weight: 15,690 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Gedpfox Irlhjx Admett Drive power: 7.5 kW Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: used, mileage: 124,200 km, power: 279 kW (379.33 HP), first registration: 07/2008, fuel type: diesel, empty load weight: 14,150 kg, maximum load weight: 11,850 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, brakes: other, color: blue, driver cabin: other, gearing type: other, emission class: euro4, suspension: air, number of seats: 2, loading space volume: 37 m³, loading space length: 6,200 mm, loading space width: 2,400 mm, loading space height: 2,450 mm, Equipment: ABS, air conditioning, crane, differential lock, parking heater, soot filter, trailer coupling, * German vehicle * 1st hand and fully maintained checkbook * Very rare glass / metal / recyclable material recycling aluminum tipper for collecting glass * * Tipping skip with 3-chamber system * Separate emptying of the individual chambers * Atlas/Terex crane 145.2 with high steering * Lifting capacity up to 9.40m = 1,500kg * 2 hydraulic extensions * Hydraulic outriggers * 5 + 6 control circuits * 260 bar operating pressure * * Trailer coupling * Euro 4 * Opticruise transmission * Retarder * ABS (anti-lock braking system) * Air conditioning * Driver's cab with bed * Auxiliary heating with remote control * Leaf/air suspension * Electric windows * Roof hatch * Sunshade * Radio * * Body dimensions: Length: 6.200 * Width: 2.400m * Height: 2,450 * gross vehicle weight: 26,000 kg * Payload: 11,850 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Godpfx Adsvhpa Rjmjtt We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical Baler Dixi 50 S, Year of Manufacture 2019 Technical Specifications Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of Manufacture: 2019 Drive Power: 7.5 kW Pressing Force: 50 t Pressing Time: 23 s Filling Opening: 1200 x 620 mm Filling Height: 1000 mm Bale Size: 1200 x 800 x 830 mm Bale Weight: 300–350 kg Tying: Manual Transport Dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Gjdpsx Irimsfx Admstt Remarks: The machine is in very good condition. It has been inspected and tested at our Stuhr location (postal code 28816). You can find a video of the machine on our website or on our YouTube channel. Viewings, including under power, are possible at any time by prior arrangement. On request, we can also carry out test runs with your material for a handling fee. We are happy to answer any questions you may have about the machine by phone from Monday to Thursday between 08:00 and 14:00, and on Friday from 08:00 to 13:00. Please note: All technical details are based on manufacturer information. We accept no liability for the accuracy of the provided data or for any errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, functionality: fully functional, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Gtedpfxjx Irigo Admst Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,350 h, functionality: fully functional, Europress EP 6500 V5 H4, Cross Tying, Year of Manufacture 2009 Technical Specifications: Manufacturer: Europress Model: 6500 V5 H4 Year of Manufacture: 2009 Operating Hours: approx. 15,334 hours Number of Bales: 138,097 bales Main Press Force: 120 t Specific Press Force: 142 kg/cm² Feed Hopper Dimensions: 1,650 x 1,100 mm Filling Volume: 3 m³ Filling Volume per Press Cycle: 1.58 m³ Bale Dimensions: 730 x 1,100 mm Drive Power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total Connected Load: 83 kW Current Consumption: 150 A Godpfx Asx Irh Nsdmstt Tying: 5-fold vertical, 4-fold horizontal, fully automatic Bale Weight: 450–900 kg Hydraulic Tank Capacity: 1,200 L PLC Control: Siemens S7-200 Control Panel: Siemens Touchscreen Press Dimensions (assembled with hopper): 13,465 x 5,200 x 5,074 mm Transport Dimensions Press: 9,965 x 2,500 x 2,900 mm (L x W x H) Press Weight: approx. 28 t Work Carried Out on the EP 6500 V5: - Completely derusted and repainted - Inner steel floor of the press completely renewed - Ram (steel structure) overhauled - Complete overhaul of the horizontal and vertical lance boxes - Complete renewal of internal Hardox wear plating - All hydraulic hoses new - Both hydraulic cylinder lifters renewed - Knives and counter knives replaced - All hydraulic cylinders resealed and tested - All slide and guide plastics replaced - Wire deflection pulleys renewed - Replacement of various cables and sensors - Replacement of various electrical components (control cabinet) - Complete inspection of electrics/control system - Complete hydraulic pressure inspection Remarks: The machine has been overhauled, inspected, and tested by us. You can find the video on our website or YouTube channel. Inspections, including powered tests, are possible at any time by prior arrangement. If you have any questions regarding the machine, we are happy to assist you by phone Monday to Thursday from 08:00 to 14:00, and Friday from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the accuracy of the information or for possible errors. Offers are subject to change, prior sale, and withdrawal at any time. Inspections are possible by prior arrangement. The sale is ex location, without any warranty or guarantee.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baler Dixi 60 SLD, Year of manufacture 2015 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Gtodox E Tcvepfx Admst Year of construction: 2015 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Press cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Please note: All technical data is based on manufacturer information. We accept no liability for the stated details or potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Viewing is possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Baler Dixi 60 SLD, Year of Manufacture 2012 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Gedpfx Aex E Tccodmjtt Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Please note: All technical data are based on the manufacturer's information. We assume no liability for any errors or the accuracy of the information provided. This offer is subject to change and prior sale; it can be revoked at any time. Inspection by appointment only. Sale is ex works, payment in advance, without warranty or guarantee.