Used Tying for sale (69)

Condition: used, Year of construction: 2001, functionality: limited functionality, input voltage: 230 V, overall weight: 350 kg, height adjustment type: pneumatic, working width: 600 mm, table width: 600 mm, table length: 650 mm, power: 1.5 kW (2.04 HP), Professional industrial ATMA TY-700H flatbed screen printing machine for sale due to the termination/change of our screen printing activities. The machine comes from our own screen printing facility and was used for professional production work. Details: * Brand: ATMA * Type: TY-700H / AT-TY-700H * Year of manufacture: 2001 * 230 V * 1500 W * Semi-automatic flatbed screen printing machine * Max. printing size approx. 600 × 650 mm * Max. frame size approx. 900 × 1100 mm * Vacuum table * Pneumatic squeegee and flood bar control * Pneumatic screen frame clamping * Vertical lifting of the screen frame * Digital/microprocessor control * Fine adjustment/registration of the printing table * Includes existing squeegees/flood bars and accessories as shown in the photos Itjdpfxsz Hykds Akpen * Weight approx. 350 kg Condition: The machine has been used professionally in our screen printing facility. We have currently tested it electrically: the machine switches on, the control panel and digital display are working. We have not re-tested the full functionality at this time because compressed air is not available at the current location. Therefore, we are selling it in its current condition, and inspection is of course possible. (Connecting it to a mobile compressor is possible if desired). Due to its size and weight, it can only be picked up. The buyer is responsible for arranging suitable transport. Serious offers are welcome. Location: Eindhoven.

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. Itjdpfx Aozuuimskpen The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h Itjdpfxexm Rwqo Akpsn 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: used, Year of construction: 2009, functionality: fully functional, pressing force: 60 t, filling opening width: 1,000 mm, filling opening length: 1,450 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, total width: 2,500 mm, total height: 3,500 mm, total length: 9,255 mm, overall weight: 14,000 kg, warranty duration: 12 months, transport height: 2,587 mm, transport width: 2,500 mm, transport length: 6,645 mm, Equipment: documentation/manual, For sale is a bale press, model EP 6000 V5, manufactured in 2009. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the demands of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of relevant machine components • Evaluation of all wear-relevant components Itjdpfxjzgf Hge Akpon • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the bale tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We would be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Year of construction: 2022, condition: used, The lot consists of 2 binding machines. Machine type: KNRA-6/900x1200 Year of manufacture: 2022 Itjdpfx Akoy Tw Tnjpjn Additional technical data can be provided upon request. Offers must be submitted for consideration.

Condition: used, Year of construction: 2020, functionality: fully functional, pressing force: 120 t, filling opening width: 2,000 mm, filling opening length: 1,000 mm, bale width: 750 mm, bale height: 1,100 mm, total width: 2,835 mm, total height: 4,374 mm, total length: 19,627 mm, overall weight: 43,000 kg, warranty duration: 12 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, For sale is a baling press, model "HP-G 4 120 VG6," manufactured in 2020, featuring a 6-strand vertical PP twine tying system. The pictures show the machine in its assembled condition. It is now located at our facility in Lathen. The press is sold without a conveyor belt. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of the relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, slide guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you. Itodpfjzhudqox Akpsn

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material Ijdpfxsyzr Nms Akpotn • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, Year of construction: 2018, Channel baling press Avermann AVOS 1810 BRK-90/100, year of manufacture 2018, with cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of feed hopper: 1,800 x 1,000 mm Iodez H I Dxepfx Akpstn Throughput at 35 kg/m³: 15.0 t/h Throughput at 60 kg/m³: 20.0 t/h Throughput at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, material-dependent Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty. Our payment terms are 100% prepayment.

Condition: excellent (used), 1 x stainless steel 14 head multihead Screw weigher complete with twin incline feed conveyor and exit conveyor. IP65 rated. Dimple pans for sticky and awkward products. Model TY-P14 Itsdpfoz Ak I Ujx Akpjn

Condition: used, Orwak 3410 Swedish Industrial Vertical Paper Baler / Waste Baling Press (Pressing force 24t, 4 kW), Used Equipment Technical Data: Manufacturer: Orwak AB (Made in Sweden) Type: 3410 (Product No.: 4903410-00) Serial No.: 82268 Net Weight: 1350 kg Overall Dimensions (W × D × H): 1600 × 1100 × 3050 mm Bale Dimensions (W × D × H): 1200 × 800 × 900 mm Bale weight: up to 400 kg (Pressing force 24t, 4 kW) Electrical Data: Power Supply: 3 × 400 V / 50 Hz (3-phase) Motor Power: 4.0 kW Rated Current: 9.8 A Iedpfez Rn Awex Akpstn Equipment and Features: Convenient, wide top loading opening for fast material loading Integrated strapping band holders for quick and easy bale tying Quiet, enclosed hydraulic operation with high compaction force Door mechanism with safety interlock Durable Swedish technology designed for exceptionally low maintenance costs

Condition: good (used), Year of construction: 2000, pressing force: 80 t, bale width: 1,100 mm, bale height: 720 mm, noise level: 85 dB, oil tank capacity: 900 l, empty load weight: 24,000 kg, operating pressure: 250 bar, For sale: a Bollegraaf 80A baling press from the year 2000, including a feed conveyor. The machine is in working condition and is still in use. The machine can be inspected by appointment. The machine is equipped with a pre-compression flap, cross-tying with horizontal wires, and is powered by a 45 kW main pump. The feed conveyor has a working width of 1500 mm. Isdpfxjz Sza Es Akpstn

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 530001846, pressing force: 70 t, filling opening width: 1,020 mm, filling opening length: 900 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 600 kg, total width: 2,060 mm, total height: 2,394 mm, total length: 5,992 mm, type of input current: three-phase, input voltage: 400 V, input current: 19 A, overall weight: 7,500 kg, warranty duration: 3 months, noise level: 70 dB, pressure: 58 bar, transport height: 2,400 mm, pressure (max.): 70 bar, opening width: 1,020 mm, empty load weight: 7,500 kg, year of last overhaul: 2026, volume flow: 43 m³/h, operating pressure: 70 bar, transport width: 2,066 mm, transport length: 5,992 mm, protection type (IP code): IP54, input frequency: 50 Hz, tank capacity: 123 l, stroke length: 1,500 mm, Equipment: documentation/manual, FOR SALE: HSM HL 7009 Li hydraulic baling press Manufacturer: HSM Pressen GmbH, Germany Single-chamber horizontal baling press for waste, used Itodpozmu Umofx Akpsn Suitable for compacting/baling paper, plastics, PET bottles, municipal waste, etc. In the case of paper, suitable for logistical packaging for paper mills = waste valorization Pressing force: 70 tons (compaction ratio approx. 6:1) Motor: 11 kW, 3x400 V Overall dimensions of the machine/press: 580 × 290 × 300 cm (L × W × H) Bale dimensions: 120 × 110 × 110 cm (L × W × H), 1.5 m3, 650 kg, 1 bale = 1 pallet Bales can be stacked on top of each other Automatic bale ejection system onto pallets Easy bale tying with 4 strands of iron wire Machine/press weight: 7400 kg Year of manufacture: 2017 Both left-hand and right-hand models are available for optimal placement in the facility. The machine has been inspected and serviced, is leak-free, regularly maintained, and ready for use. 3-month warranty. Invoice provided, price excludes VAT. Transport: - Loading included in the price - Personal collection at Moravec 41, Žďár nad Sázavou district - Alternatively, truck transport can be arranged.

Condition: good (used), Bramidan MC16 baler for waste paper Machine in perfect condition, like new. Purchased from storage; practically unused. Ideal for baling paper, waste paper, PET, plastic film, clothing, general waste, etc. Description: – Compact design, requiring minimal workspace – Bale weight: 250 kg – Large top-loading opening for waste – Two-chamber system – Intuitive control panel – Automatic piston return after the compression cycle – Maintenance-free hydraulic system – Easy bale removal thanks to an integrated ejection system – Bale-tying system Power supply: 380V, 50 Hz Pressing force: 16t Max. bale dimensions: 1100 x 800 x 700 mm External dimensions: 2540 x 1210 x 2570 mm Power: 4 kW Itodpfx Akez S Uniopen Weight: 1220 kg Made in Denmark.

Year of construction: 2018, condition: excellent (used), Fully automatic production line for chocolate bars, made of stainless steel Manufacturer: GUSU Food Processing Machinery Year of construction: 2018 Condition: very good, little used The line consists of the following units: Chocolate bar production line, TPX-400, 400 V 3P 50 Hz, 40 kW 180° turning conveyor belt, TPX-400, 400 V 3P 50 Hz, 1.5 kW Elevator, TPX-400, 400 V 3P 50 Hz, 1.1 kW Straight roller, TPX-400, 400 V 3P 50 Hz, 0.75 kW Longitudinal cutter and distributor, TPX-400, 400 V 3P 50 Hz, 1.27 kW Single group roller, TPX-400, 400 V 3P 50 Hz, 1 kW Transverse cutter, TPX-400, 400 V 3P 50 Hz, 2.5 kW Chocolate storage tank, BWG500, 400 V 3P 50 Hz, 6 kW Isdpfxszx Uz Do Akpstn Chocolate conche, JMJ500, 400 V 3P 50 Hz, 9 kW Chocolate enrobing machine, TY J600, 400 V 3P 50 Hz, 21.38 kW Cooling tunnel evaporator I, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator II, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator III, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator IV, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator V, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator VI, TY J600, 400 V 3P 50 Hz, 0.75 kW Automatic packaging machine, SFC 2, 400 V 3P 50 Hz The production line is 35 meters long. If you have any questions, please do not hesitate to contact us!

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Ijdoyuyg Sopfx Akpstn Wire coils platform : Not included.

Condition: ready for operation (used), Year of construction: 2003, Baling press Hsm 500.2 vl Fourfold wire tying of bales Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Itedpfx Aera Ak Eekpjn Filling opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Vertical baler Hsm V press 500.2 VL Year of manufacture: 2004-2008 Price: 3,500 EUR Transport height: 2600 mm

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 Isdpfxjra Rbgo Akpstn HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: used, Year of construction: 2001, operating hours: 72,897 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,600 mm, filling opening length: 1,020 mm, bale width: 1,100 mm, bale height: 800 mm, overall weight: 20,000 kg, noise level: 80 dB, oil tank capacity: 2,100 l, power: 75 kW (101.97 HP), volume flow: 285 m³/h, For sale: a Paal Likon 80/80M baling press. This machine has always been used for baling paper and cardboard. The machine is fully functional and equipped with a Siemens Simatic S7-300 PLC. It features a horizontal tying system with four wires. Ijdpfxszkuifs Akpetn

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Main cylinder resealed. New hydraulic hoses. New hydraulic oil. Sub-oil motor. Plexiglass panels replaced. Guide rollers on the press plate readjusted. Itjdpfjy D Dr Ssx Akpen Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: good (used), Year of construction: 2021, ARI Premio dashboard actuator, sliding drive, type 2.2 kN – used: Price per unit, ex works: €585.00 (net)! Manufacturer: ARI-Premio Type: 2.2 kN Year of manufacture: 2021 Serial number: SN100592339-027 Iedsz Sdw Uepfx Akpstn Pn: 15/16 VA In: 65/69 mA m/m: 0.38/0.45 10 A Stroke: 20 mm Ty: 53/458 Available quantity to be determined Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baling press Dixi 50 S, year of manufacture 2019, very good condition Technical data Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow containers, big bags, textiles, film, Styrofoam, non-woven fabric, glass wool, etc. The operating manual and EC declaration of conformity are available in German. Note: The machine is in very good condition. It has been inspected and tested by us. The video can be found on our website or our YouTube channel. Please note: Itedpfxez H I Eve Akpon All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2017, operating hours: 432 h, functionality: fully functional, Horizontal baling press HSM HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Operating hours: 432 Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-strand horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Iodpfez H I D Eox Akpotn Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Itedpez H I Dlofx Akpen Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Isdpfxoygud Ao Akpstn Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: ready for operation (used), The DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical reduction of volume of residual materials (suitable for recycling) in industry and crafts: Cardboard boxes Foam PET bottles Insulation mats and other compressible materials. Horizontal baler, waste press DIXI 60 SLD with ejector Technical specifications: Pressing force: 60 tons, Unit pressure: 6.81 kg/cm², Power supply: 400V / 7.5kW Bale dimensions: 800x1100x1200 mm, Number of ties: 3 Bale weight: approx. 370-410 kg, Tying: manual Loading aperture: 990 x 1110 mm, Machine weight: 5420 kg Average pressing cycle: 47 seconds Year of manufacture: 2011-2016 Dixi 80SLD Baler Technical data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Infeed opening (width x height): 1040 x 1110 mm Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size (width x height x length): 1120 x 1120 x 1200 mm Bale weight: Depending on the material, approx. 500–600 kg Bale tying: 3-fold, manual Machine dimensions: Itsdpsra A E Uofx Akpsn Length: 4200 mm (+cage 1600 mm) Width: 1830 mm Height: 2620 mm Machine weight: approx. 8000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used Price: 14,000 EUR