Channel baling press

Fab. Hofmann Typ Compact EE 320

Condition: new, Year of construction: 2024, 1. EPS COMPACTOR MOD. SAGITTARIUS-486 (MOD.) Custom IDEAL FOR: • Automotive industry, • EPP, EPE packaging manufacturers • EPP load carrier manufacturers • Companies that process PUR soft foam • Specialized disposal operations • Recycling companies. Technical data sheet Materials EPS (polystyrene) *Density reached 350-450 kg/m3 Nodpomhfd Esfx Aa Eolk Hourly capacity 30-65 Kg approx. Block size 200 x 200 mm Loading opening (standard) 1,072 x 800 mm Noise level Standard: 76-90 dB Weight 1,200 Kg Dimensions 3,900 x 1,450 h= 2,000 mm Total power 8 kW Power supply 3 x 400V, 50Hz, 32° C E Approved marking How does the compactor work? 1. Simply throw the polystyrene waste into the machine's hopper. 2. The shredder will break the polystyrene waste into smaller flakes measuring 20mm to 50 mm. 3. A drill compactor, positioned under the shredder, will press the polystyrene waste into compact blocks. 4. The final result will be densified blocks of up to 350 kg/m3 *density may vary depending on the type of material to be compacted

Condition: used, Used Line for Oil Production ALFALAVAL up to 1500 kg/h The continuous cycle olive mill operates as a complete system, producing oil with a capacity of up to 1500 kg/h. Moreover, each component features high-quality materials, primarily stainless steel, ensuring durability and compliance with hygiene regulations. Loading and Washing System To begin with, the bin tipper feeds olives onto a conveyor belt, maintaining a continuous and consistent flow toward the washing phase. Subsequently, the washer with leaf remover separates leaves and impurities effectively. In addition, the stainless steel Alfa Laval washer with an integrated cyclone cleans the olives thoroughly. Meanwhile, a hopper and screw feeder deliver the olives to the crusher, preserving their quality through stainless steel construction. Nledpfx Aevgu U Dja Eok Crushing and Paste Transfer After washing, the stainless steel hammer crusher Rapanelli, mounted on a steel frame, crushes olives uniformly at a capacity of 25 q/h. Then, a pump transfers the paste to the malaxers, which play a crucial role in the process. Furthermore, six stainless steel tanks, each holding 600 liters, malax the paste. As a result, pneumatic valves control loading and unloading, while inspection windows provide a clear view of the process. Notably, anti-condensation doors, coded green for loading and red for unloading, enhance functionality. Decanter and Separation At this stage, the Alfa Laval decanter 716B-11G processes 12-15 q/h of paste. Consequently, the decanter separates oil and water into a stainless steel tank while a vibrating screen removes residues. Additionally, pumps handle the transfer of water and oil, and an 11-meter stainless steel screw conveyor moves the pomace through a hopper. Moreover, two Alfa Laval centrifugal separators (models 407-AGT and 507-AGT) refine the oil with high efficiency. Automation and Control On the automation side, the system relies on an electrical cabinet that automates and supervises operations. For this reason, a dedicated Touch Screen PC enables operators to monitor every phase of the process in real-time. Accordingly, this advanced control system minimizes manual intervention, ensuring precision and smooth operation. Operating Conditions The Used Line for Oil Production ALFALAVAL is running smoothly for the current campaign. Furthermore, its modular design and durable materials ensure longevity and simplify maintenance. Meanwhile, stainless steel piping preserves the oil’s organoleptic properties and prevents contamination. In conclusion, the Used Line for Oil Production ALFALAVAL up to 1500 kg/h provides an efficient and complete technical solution for producing high-quality oil.

Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Nljdpfxswtdk Te Aa Esk Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Njdpfx Aevwlqqsa Eelk Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Press dimensions: length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. If you have any questions, please contact us at 539 660 495. Nlsdpfx Aaoh Nyfyj Eok

Condition: good (used), Year of construction: 1992, functionality: unexamined, overall weight: 18,000 kg, power: 250 kW (339.91 HP), For bulky waste, pallets, residual wood, etc. Single-shaft shredder with electrohydraulic drive Nsdpfxsq I Rkdo Aa Ejlk Rotor width: 2500 mm Rotor diameter: approx. 500 mm Electric motor: 250 kW

Condition: used, Year of construction: 1997, machine/vehicle number: 97989, Schwertfalzwerk - Mobile Folding Knife Stahl VFZ 52.DFour-directional folding unit - Vierbruchfalzwerk Year 1997 - Serial-No. 97989/97-255056 Sheet Size min 120 x 100mm - max. 520 x 360mm Speed max. 160 m/min. Cycle Rate max. 30000cycle/hour Infeed high 515 - 915mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Nlsdpfx Aell A Tiea Esk

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Njdpfx Aasip D Rze Eslk

Condition: good (used), Year of construction: 1987, Manufacturer: Bergmann Type: PS 8100 Height: 2.200 mm Width: 1.200 mm Length: 1.625 mm Loading height 1.900 mm Weight: 800 kg Nominal current in 400 V 4,8 A Nominal transformator current in 230 V 0,38 A Nljdpfsk E Hh Sox Aa Ejk Motor power: 2,2 kW Fuse: 10 A, slow Rotation: 13 ./min Protection: IP 54 Fire class: D, E Hidraulic oil: HLP 32 Bale weight (depend from the material): 150-400 kg Bale volume: 1 m³

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm Nljdpfx Aaob A Ii So Eek -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested