Used Tying for sale (75)

Condition: excellent (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2016 Bljdpfx Aoybaz Aegzed Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1,030 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: triple, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested at our location in 28816 Stuhr. You will find the video on our website or YouTube channel. The hydraulic hoses should be renewed. Inspections with power connection are possible at any time by appointment. On request, we can also carry out tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We assume no liability for the information provided or for any errors. This offer is subject to change and prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is conducted on a prepayment basis, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Baler Dixi 60 SLD, year of manufacture 2012 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Bedpjybaziefx Agzjld Pressing force: 60 t Press cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film Please note: All technical data are based on the manufacturer's specifications. We assume no liability for the information provided or for possible errors. This offer is subject to change without notice, prior sale reserved, and may be withdrawn at any time. Viewings are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Bjdpfx Aoybapasgzeld Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, functionality: fully functional, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Bsdpfx Ageybaniozsld Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Bodpfx Ajybal Uegzeld Please note: All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: used, EVG G95 Reinforcing mesh welding line 2.5x6m Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes - Automatic and highly dynamic feeding of wires from coils - Top production speeds on single-step welding lines - Double point welding is perfect technology for thicker wire diameters Scope of supply: Full machine including stands Optional: Fixed spools up to exit conveyor Bljdpsymb Unofx Agzed Technical data: Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands for 3Ton reel Cross wire switch with doubles horizontal pay offs Tying and mat lift machine not included Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands: for 3Ton reel Cross wire switch: with doubles horizontal pay offs

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material Blodpfx Asx A U Ncsgzsd SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. Bsdpfx Agjvtpq Hozsld The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bljdpfx Aex Uzynegzjd Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M Technical specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-fold, polyester strapping, manual Throughput at bulk density of 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel exit is fully automatic and self-regulating. Inspections, including powered demonstrations, are possible at any time by prior arrangement. Upon request, we can also perform tests with your material for a nominal fee. Blodpfx Ajx Uzxkegzed If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not assume any liability for the supplied information or possible errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Inspections are available by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: used, functionality: fully functional, machine/vehicle number: diverse , da mehrere verfügbar, type of input current: AC, input voltage: 400 V, Due to the cessation of business operations, we are offering our 5 tandem units (longitudinal and transverse tying) for sale! There are 2 models available: 1. SSB 2400P from year 2003/2004 and SO 2004.1 up to year 2013. Bsdpfsyk Et Ajx Agzsld The systems were in production until 16/02/2026 and are in good condition. Prices upon request.

Condition: excellent (used), Year of construction: 2017, operating hours: 13,000 h, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,200 mm, bale height: 750 mm, bale weight: 450 kg, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. Bodjyn Hk Repfx Agzeld We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 2435618, load capacity: 227 kg, lifting height: 7,920 mm, platform length: 2,130 mm, platform width: 710 mm, overall weight: 1,890 kg, transport length: 2,320 mm, transport width: 840 mm, transport height: 1,910 mm, fuel type: electric, tire size: 16 x 5 x 12, color: red, Technical data Year of manufacture: 2018 Engine: Electric Working height: 9.92 m Platform height: 7.92 m Platform dimensions (L x W): 2.13 m x 0.71 m Platform extension: 0.91 m Bedpfx Aeyqy R Negzjld Overall dimensions (L x W x H): 2.32 m x 0.84 m x 2.15 m Weight: 1890 kg Fpjbn N Uju E Ty Tsr N Hec Max. load capacity: 227 kg Max. gradeability: 30% Travel speed: 1.1 - 3.2 km/h Delivery optional Rental optional Fully operational, generally used condition

Condition: good (used), Electric motor, three-phase motor, pulley motor -Manufacturer: Birkenbeul, electric motor Ty AP 90S4 -Power: 1.1 kW -Speed: 1430 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Protection class: P 33 / IP 44 -Dimensions: 300/265/H180 mm -Weight: 20.7 kg Bledpfxjxb Rulo Agzod

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Bsdjw U Dt Nepfx Agzold Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, power: 207 kW (281.44 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, Mr. Seidel will be happy to assist you with any enquiries regarding the vehicle (by phone). Iveco Eurocargo ML160E28/P 4x2 refrigerated box body with side door and tail lift Tail lift: Bär BC 1500S4 (1,500 kg), Refrigeration: Thermo King T-1200R-50, KIESLING refrigerated box, monotemp, tail lift ref. AN 232393, Length: 7,400 mm, Width: 2,480 mm, Height: 2,400 mm, axle configuration: 2 axles, rear axle drive, cab: standard cab NS, Engine: 280 TY, Transmission: ZF automatic 8AP, Gross vehicle weight rating: 15-16 t, Drive axle: single reduction, single axle, rear axle air suspension, brakes: disc/disc, wheelbase 5,175 mm, Driver Drowsiness Attention Warning system, standard frame overhang, AdBlue tank heating, standard braking system, Electronic Stability Program (ESP), intake air heater for optimal cold start performance in extreme temperatures, reversing camera system, Blind Spot Information System (BSIS) on right, Intelligent Speed Assistance (ISA), Moving Off Information System (MOIS), pneumatic parking brake, 200-litre plastic, lockable fuel tank, plastic steering wheel, heated fuel pre-filter on frame, standard chassis component arrangement, wiring for alcohol interlock (ALC), 30-litre AdBlue tank, Tyre Pressure Monitoring System (TPMS), sensors internal, rear axle ratio 4.13, Lane Departure Warning System (LDWS), Connectivity Box 4G including TCO service contract, voltage converter 24/12 Volt (10.5 Amp), hill start assist (Hill Holder) for comfortable uphill starts, Advanced Emergency Braking System (AEBS), speed limiter 90 km/h, Adaptive Cruise Control (ACC), clothes rail on rear cab wall with adjustable hooks, manual cab tilt device, warning triangle according to ECE-27, front halogen headlights, standard flat-roof cab, radio with Bluetooth, DAB+ and 7" display, mirrors for 2,600 mm body width, mechanical roof hatch, plastic bumper, black cab attachments, fabric-trimmed cab interior, digital tachograph 4.1, white flat roof, rear air suspension, front parabolic spring, 2 wheel chocks, left-hand drive for right-hand traffic, specification for temperate climate, front manoeuvring and towing eye, front underrun protection for chassis with GVW >7,490 kg, grey chassis frame, C-profile steel ladder frame, chassis protection sealing Tectyl 300 G Clear, ZF 8AP1000 automatic gearbox, centrally mounted exhaust tailpipe, air filter unit under cab, EURO VI E emission standard, NOISE ECE 51/03, two-stage engine brake, can be activated via right-hand column stalk, Westinghouse brake, raw air intake without snorkel, heated air dryer for brake system, extension module for PTO control, axle load indicator in cluster, tyres 305/70R19.5, LED tail lights, without battery isolator switch, electrical preinstallation for tail lift operation according to VEHH standard, reverse warning buzzer (deactivatable), 170 Ah batteries (recommended for tail lift and/or PTO use), toll system preparation (OBU), includes antenna and wiring on dashboard without receiver, alternator: 2,880 Watt (24 Volt x 120 Amp), electrical preinstallation for cargo area lighting,... Bjdpfx Aoyfrpmsgzsld

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser 'LDM 500-60 ' has a wavelength of of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 wavelength of 935 nanometers +-10% Laser power: 550 W Mains voltage 100-264V +- 10% Max.power input 1,7 kw Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 has the power of a complete PC in a very small space. Instead of a hard disk a removable flash disk was installed. Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of Bjdpjdux Duefx Agzold for tasks in the field of measurement and control in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: exchangeable flash disk Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear. Housing: 212mm X 80mm X 250mm ( height X width X depth ) Protection class:Front: IP40 Environment: 15°C - 40°C Ty

Condition: excellent (used), Year of construction: 2016, pressing force: 80 t, Equipment: documentation/manual, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Bljdjykyu Uspfx Agzjd Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys Bsdpfjygud Asx Agzeld - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as Cans, PET, Metal Buckets, Metal Containers, but also Plastic Canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Top loading Special Waste Baler Bedevbq Rkjpfx Agzsld User-friendly lever control Automatic bale kicker for easy bale removal Retainers for reducing the material spring back Cross Strapping Tying System to keep difficult materials in bale Reel holder for strapping rolls A quality product “Made in Europe” Suitable for compacting PET bottles Cans and sheet metal containers Canister and plastic containers Cardboard and plastic film and foils Optional Extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Can Compactor, Can Press, PET Compactor, PET Press, Baler PET bottles, PET Bottle Baler, Ballenpresse, Papierpresse, Altpapierpresse, Kartonpresse, Kartonagenpresse, Folienpresse, Papierballenpresse, Abfall-Ballenpresse, Abfallpresse, Presse Wertstoff, Müllverdichter, Müllpresse, Restmüllpresse

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as cans, PET, metal buckets, metal containers, but also plastic canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Top loading Special Waste Baler User-friendly lever control Automatic bale kicker for easy bale removal Retainers for reducing the material spring back Cross Strapping Tying System to keep difficult materials in bale Reel holder for 7 rolls of strapping A quality product “Made in Europe” Suitable for compacting Bodpfx Aobhy Twjgzold PET bottles Cans and sheet metal containers Canister and plastic containers Cardboard and plastic film and foils Optional Extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Can Compactor, Can Press, PET Compactor, PET Press, Baler PET bottles, PET Bottle Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Bljdpfx Aeymmtcegzsd Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Bledpfsvgrh Ujx Agzjd Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. Blsdpfx Agjv T I Evozod The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, Equipment: documentation/manual, DIXI 80 SLS horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams Blsdpfoyg Dtyox Agzod PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)