Used Turbocharger Balancing for sale (925)

Condition: new, Balance Systems 9NDRAEA0046000 SN:B512867 ,unused in opened original box, 100% functional, scope of delivery according to photos Hjdpfxei D T A Re Aa Ejg

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Hjdevvkipopfx Aa Eeg

Condition: new, functionality: fully functional, mileage: 1 km, power: 47.81 kW (65.00 HP), fuel type: diesel, color: yellow, empty load weight: 6,530 kg, operation weight: 6,530 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: cabin, crane, Wheeled Excavator G70X Wheeled Excavator The G70X wheeled excavator is a powerful, precise, and highly mobile machine, ideal for all types of construction work. Powered by a Euro 5 Yuchai F3065-S580 engine delivering 48 kW (65 hp), the G70X offers excellent performance, reliability, and low emissions. Advanced hydraulic technology and efficient operational parameters make this excavator indispensable on any professional job site. Engine and Hydraulic Efficiency Hjdpfx Aajxr Rwho Esg Equipped with the Euro 5 Yuchai F3065-S580 engine, the G70X delivers 48 kW (65 hp) and complies with stringent Euro 5 emission standards for environmental friendliness. The engine provides a balance between high power and fuel efficiency, enabling prolonged operation without frequent refueling. The hydraulic oil flow rate of 85 L/min and a main relief valve pressure of 24.5 MPa ensure powerful work performance for rapid, precise movements and high digging force. Excellent Work Parameters The G70X offers a wide operational range, with a maximum digging reach of 6,535 mm, minimizing the need for frequent repositioning. It achieves a maximum digging depth of 3,530 mm, digging height of 6,715 mm, and dumping height of 4,905 mm, making it suitable for deep excavation and efficient material handling at height. Speed and Maneuverability Engineered for high mobility, the G70X attains a maximum travel speed of 30 km/h for rapid transit on the job site. The platform rotation speed is 8.5 rpm, enabling precise control in confined spaces. With a minimum front turning radius of 2,275 mm and a rear turning radius of 1,665 mm, the excavator offers excellent maneuverability, ideal for work in narrow or challenging terrains. Technical Data Weight: 6,530 kg Engine: Euro 5 Yuchai F3065-S580 Engine power: 48 kW (65 hp) Oil flow rate: 85 L/min Main relief valve pressure: 24.5 MPa Maximum digging force: 35 kN Maximum travel speed: 30 km/h Platform rotation speed: 8.5 rpm Fuel tank capacity: 135 L Hydraulic oil tank capacity: 120 L Maximum digging reach: 6,535 mm Maximum digging depth: 3,530 mm Maximum digging height: 6,715 mm Maximum dumping height: 4,905 mm Minimum front turning radius: 2,275 mm Minimum rear turning radius: 1,665 mm Overall length: 5,950 mm Overall width: 2,010 mm Overall height: 2,800 mm Wheelbase: 2,410 mm Tire size: 195/85-20 Ground clearance: 430 mm Blade width: 1,980 mm Blade height: 390 mm Bucket width: 700 mm Boom length: 3,400 mm

Condition: good (used), MS Qualispray Manual Powder Coating Unit Manufacturer: MS Powder Systems Powder Coating System: Qualispray Digital Control Unit: QSM 2500 Item No.: 80510000 Hand-held Spray Gun: MS Corona CP-2100 Features and Benefits The Qualispray system is part of MS' comprehensive powder coating solutions, known for their efficiency, especially in applications requiring rapid color changes. It controls the Corona (MS Corona) and Tribo (MS Tribo) powder coating processes. The unit features digital displays for parameters such as frequency (F), powder quantity (D), voltage (kV), and current (µA). Buttons allow for programming (PRG), confirmation (ENTER), and increasing (+) and decreasing (-) values. An on/off switch is also included. ``` MS Corona CP-2100 Type: Coating spray gun Output voltage: max. 100 kV Polarity: Negative (standard for most powders) Maximum powder output: Approx. 450 g/min Compatible powders: General powder coatings and metallic powder coatings Weight (gun): The handheld spray gun is very lightweight at approx. 380 g, enabling fatigue-free operation. Technology: It utilizes corona charging technology with a patented corona feedback system, providing high coating quality and high transfer efficiency. Features and Benefits Ergonomics: The lightweight and balanced design of the handheld spray gun ensures easy handling. Efficiency: The high-performance cascade maintains a stable high voltage, guaranteeing uniform and efficient coating, even in hard-to-reach areas (Faraday cages). Adaptability: Thanks to a versatile nozzle system and optional accessories, such as the "SuperCorona" ring for exceptionally smooth surfaces, the gun can be adapted to specific coating tasks. Application The MS Corona CP-2100 is used in industrial and commercial powder coating applications, for example, for metal fences, automotive parts, radiators, and other workpieces where a high-quality and uniform surface finish is required. Hodpfx Asx Ihqtea Ejg Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2000, machine/vehicle number: Pulsar HS-150RAS, Tacchella Pulsar HS-150RAS CNC Angle Approach Cylindrical Grinder Hsdpfx Asxxyqkoa Ejg dia 250 x 800mm, VM24 grinding wheel balancing system, MARPOSS InProcess measuring unit, CNC SIEMENS SINUMERIK 840D

Year of construction: 2014, condition: like new (used), Capacity approx. 60.000 kg bracket dimension approx. 463 mm Accuracy of the display capacity approx. +/- 0.03 % Smallest display digit 20 kg Hodped R Racofx Aa Ejg Digit height 50 mm Reading distance up to min. 60 m Power supply 12 V rechargeable battery Charger 12 V/4A with charging current limitation Crane scale equipped with: - Single hook size 40 - single fixture - storage rack - charger - Infrared control for activating the balance functions - Integrated overload protection - Automatic switch-off, variably adjustable from 0-99 minutes

Condition: new, Dittel Marposs WB HEAD-ST50X120 / FC NP TF 0950 / O3PL2024504 Electromagnetic built-in balancing head, SN:O14LW1381, unused in opened original packaging, 100% functional, scope of delivery as per photos Hodpji D Upysfx Aa Eeg

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Hodpfx Aaevvi Nzj Eog

Condition: new, functionality: fully functional, power: 80.9 kW (109.99 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 8,000 kg, empty load weight: 8,000 kg, operation weight: 8,000 kg, maximum load weight: 2,500 kg, lifting power: 2,500 kg/m, lifting height: 2,800 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Excavator Loader GG30BC Excavator Loader The GG30BC excavator loader is a robust and reliable machine designed for construction and industrial applications. With a loading capacity of 2,500 kg and an operating weight of 8,000 kg, this machine delivers outstanding stability and efficiency. The loader bucket, with a width of 2,200 mm and a capacity of 1.3 m³, ensures fast and effective loading. Engine and Drive System The machine is equipped with a modern YUCHAI YCF36110-S500 engine (81 kW). The mechanical transmission with fixed drive axle features 2 forward and 2 reverse gears, providing optimal control of the vehicle. The maximum travel speed is 24 km/h, enabling efficient transportation around the jobsite. Hydraulics and Brake System The advanced hydraulic system operates at a pressure of 22 MPa and delivers a digging force of 46.5 kN for the grab and 31 kN for the bucket. The standard digging depth is 4,000 mm, extendable to 5,500 mm with an optional telescopic arm. The machine is fitted with a pneumatic-hydraulic braking system including an emergency stop function, significantly enhancing operational safety. Working Range and Dimensions The GG30BC provides a dump height of 2,800 mm, a reach of 1,062 mm, and a swing angle of 190°. The maximum tractive force is 39 kN, and the breakout force is 38 kN. A minimum ground clearance of 300 mm ensures excellent performance on challenging terrain. The machine dimensions are 7,600 × 2,260 × 2,890 mm, with a turning radius of 6,581 mm at a steering angle of ±36°. Engine model: Euro 5 YUCHAI ENGINE-YCF36110-S500 Rated power: 81 kW (110 hp) Operating weight: 8,000 kg Loading capacity: 2,500 kg Transmission type: Mechanical transmission with fixed power drive Hedpfoxr Ru Hsx Aa Ejg Gears: 2 forward / 2 reverse Maximum speed: 24 km/h Tyres: (F) 14-17.5 (R) 19.5L-24 Steering brand: FEICHENG YUNYU Steering system working pressure: 12 Pa Front tyre pressure: 0.22 MPa Main transmission type: Reduction Final drive: Single-stage final reducer Brake system control: Pneumatic brake clamp over oil, external, self-regulating, self-balancing Hydraulic system pressure: 22 MPa Digging force (grab): 46.5 kN Digging force (bucket): 31 kN Brake type: Self-levelling Emergency brake control: Manual – parking brake with end force Bucket capacity: 1.3 m³ Bucket width: 2,200 mm Dipper bucket capacity: 620 mm Loader dump height: 2,800 mm Loader dump reach: 1,062 mm Maximum digging depth: 4,000 mm Optional digging depth: 5,000–5,500 mm (with telescopic arm) Minimum turning radius: 6,581 mm Digging arm swing angle: 190° Maximum tractive force: 39 kN Breakout force: 38 kN Minimum ground clearance: 300 mm Wheelbase: 2,250 mm Steering angle: ±36° Working pressure: 12 MPa Length: 7,600 mm Width: 2,260 mm Height: 2,890 mm

Condition: used, The HFS 4080B C is a robust Conventional Surface Grinder designed for precision in toolmaking, repair shops, and training environments, making it a reliable choice in the Grinding Machines category. With its heavy cast-iron machine frame, this grinder offers a torsion-proof structure that enhances stability during operation. The dual V-guides for transverse motion, combined with box ways for linear motion, ensure high precision during machining processes. The large 400x800 mm table and a travel X-axis of 850 mm accommodate heavy workpieces effortlessly. Features such as the dynamically balanced grinding spindle with preloaded precision bearings guarantee excellent performance and longevity. Additionally, the user-friendly 2-axis position indicator allows for precise grinding wheel placement and boosts productivity through automatic spark-out strokes. This gentle yet efficient operation ensures minimal heat build-up and consistent results, making the HFS 4080B C a reliable choice for any workshop. You can order now to enhance your machining capabilities with this high-performance grinding solution from KNUTH. Hedpfx Aasuxpumj Eog

Condition: used, Year of construction: 2001, machine/vehicle number: 467-72, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 630 CNC Pin Grinder Hodoxxybpepfx Aa Eeg crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to

Condition: used, -External dimensions: 2600x2900x2110mm -Internal dimensions: 2400x2700x1950mm -Wall thickness: 80 mm -Temperature: -2+8 ºC / -18-23 ºC -Refrigerant: R452A -Climate class: 5 -Pre-assembled refrigeration unit on the panel -Automatic condensate water evaporation Hodpfx Ajx Eyhfoa Esg -Internal lighting -Panel finish in pre-painted sheet metal, specially designed for food use, light grey colour -300mm gaps with panels of 300, 600, 900 and 1200mm -Panel interlocking system with double-latch hooks -Rounded doors and interior corners cut at 45º -Ergonomic handle with lock and safety release system -Pressure balance valve -Stainless steel floor with non-slip surface -Reversible door, self-locking at 90º, available in 2 sizes, with clear opening of 600 and 700mm -Hinges with sloped system -Insulation in CFC-free polyurethane, high-pressure injected, with density 41 Kg/m³

Condition: new, Balance Systems 9SGJ025A050200 Digitally operated balancing head, SN:B512879, unused in opened original packaging, 100% functional, scope of delivery as per photos Hsdpfx Aaji D T Dne Eog

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Hsdpfx Aovvi N Ioa Ejg

Condition: new, functionality: fully functional, Year of construction: 1925, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 5,280 mm, free lift: 1,995 mm, fuel type: diesel, power: 18.4 kW (25.02 HP), motor manufacturer: Perkins 403J-11T, turning radius (outer): 1 mm, tire condition: 100 %, overall weight: 2,900 kg, empty load weight: 2,900 kg, total width: 1,560 mm, color: yellow, Equipment: cabin, GG613 Telehandlers The GG613 is a modern, compact telescopic loader that excels in demanding tasks across construction, agriculture, and industry. It delivers high power, precise control, and reliability, ensuring maximum performance in all conditions. Perkins 403J-11T Engine – Power and Efficiency Powered by a three-cylinder, turbocharged Perkins 403J-11T engine with a displacement of 1.1L (18.4 kW at 2800 rpm), this engine meets emission standards and delivers optimal torque with minimal fuel consumption. Hydrostatic Drive and PWG Hydraulics The hydrostatic drive system combined with the PWG hydraulic pump offers a flow rate of 28.6 l/min (optional 41.6–70 l/min) at a pressure of 225 bar, providing smooth and precise control for efficient management of attachments. Lifting Height and Operating Capacity The GG613 telehandler provides a maximum lifting height of 5280 mm with a standard bucket and 4981 mm with pallet forks, making it an ideal solution for loading and transporting materials without the need for additional equipment. Stability and Operator Comfort Hodpfx Aajxr Rwbe Eeg Thanks to its low center of gravity and wide wheelbase, the machine offers excellent stability and safety. The operator’s cab is ergonomically designed, delivers outstanding visibility, and features hydrostatic power steering for precise maneuvering on challenging terrain. Efficiency and Economy Equipped with a 33L fuel tank and a 36L hydraulic oil tank, the machine supports long periods of operation without frequent refueling. The 0.5 m³ bucket capacity and a maximum lifting capacity of 1200 kg ensure high productivity and operational efficiency. Compact Dimensions and Maneuverability Maximum load: 1200 kg Operating weight: 2900 kg Engine: Perkins 403J-11T Number of cylinders: 3 Engine type: Water-cooled, turbocharged, four-stroke Rated power / speed: 18.4 kW / 2800 rpm Displacement: 1.1 l Drive type: Hydrostatic axle drive Axle: Planetary drive on steering axle Hydraulic system: PWG Pump type: Gear pump Flow rate: 28.6 l/min (optional 41.6–70 l/min) Pump pressure: 225 bar Fuel tank capacity: 33 l Hydraulic oil tank capacity: 36 l Bucket volume: 0.5 m³ Total attachment tilt angle: 148° First gear – speed: 0–8 km/h Second gear – speed: 0–20 km/h Tyres: 10.0/75 - 15.3 Overall length (with standard bucket): 3944 mm Overall length (with pallet forks): 4081 mm Overall length (without standard bucket): 2977 mm Hinge point bucket to axle center: 450 mm Wheelbase: 1922 mm Rear overhang: 427 mm Cabin height: 1995 mm Maximum working height (with standard bucket): 5280 mm Maximum working height (with pallet forks): 4981 mm Maximum boom pivot height: 4537 mm Load height with extended boom: 4163 mm Load height with retracted boom: 2949 mm Load height (with pallet forks): 4301/3087 mm Tipping height with extended boom: 3566 mm Tipping height with retracted boom: 2352 mm Working distance: 476 mm Maximum reach at load height: 2289/932 mm

Condition: new, power: 88 kW (119.65 HP), overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: automatic, loading space width: 1,900 mm, loading space length: 3,050 mm, loading space height: 400 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Your authorized ISUZU specialist dealer – offering expertise, service, and consultation – presents the following offer: ISUZU M21 T GG 3,500 kg Right-hand drive variant with automatic transmission, tipper body, single-circuit hydraulics for gully cleaner operation 2-year manufacturer's warranty on the chassis from the date of first registration or 100,000 km (whichever comes first). Standard equipment: - 1.9 L diesel engine, VGS turbocharger with intercooler, common rail direct injection, 88 kW / 120 hp, EURO 6e EA - Particulate filter system with DPD and AdBlue (self-cleaning system allows filter regeneration without workshop visit; with the DPD technology, you are notified when regeneration is required – simply press the DPD button and the system cleans itself in 20 minutes) - 6-speed automatic gearbox - 205/75 R16 C tires - Independent suspension at the front, leaf spring suspension at the rear, front disc brakes, rear drum brakes Hjdpfxoxuxtvj Aa Eeg - Maximum speed 120 km/h - New, modern cab with excellent space utilization, generous headroom and substantial legroom, outstanding ergonomics and visibility, low step-in height - Bi-LED front headlights with headlamp cleaning system - Paint: Arc White 729 - Dimensions: cab width 1,815 mm, rear axle width 1,625 mm, height 2,145 mm (top of cab) - Passenger double bench seat, 3-seater, headrests - Driver and passenger airbags, seatbelt pretensioners for driver and passenger - Height- and tilt-adjustable steering wheel - Steering wheel controls - Electronic immobilizer - Electric parking brake + Auto Hold HSA system, acting on the prop shaft - Power windows - Mirrors with integrated reversing camera - DAB+ radio with Bluetooth, USB, 6.2" display - Driver information display 7" - LED daytime running lights, automatic lighting - Central locking with remote - Air conditioning Safety features include: - ABS: anti-lock braking system - ASR: traction control/rear axle anti-slip regulation - EBD: electronic brakeforce distribution - EVSC: electronic stability control - LDWS: lane departure warning system - MOIS: moving object detection - DWS: distance warning system - MAM: emergency braking for obstacles - FVSN: forward vision recognition - DDAW: driver drowsiness alert - TSR: traffic sign recognition - TPMS: tire pressure monitoring system - AEBS: autonomous emergency braking system - RM: reversing camera with monitor - AEBS for pedestrian and cyclist protection Body: Lightweight 3-way aluminum tipper, approx. 3,050 x 1,900 x 400 mm - Robust side and rear panels, folding, rear panel pendulum-mounted with automatic release - Tipper floor made from 3 mm thick aluminum - Ladder rack with protective grille, aligned with cab roof height - Hot-dip galvanized tipping platform - 6 recessed lashing eyes in the floor - Electrohydraulic tipping function - Plastic mudguards with splash guards Additional equipment: Single-circuit hydraulic system for operating a gully cleaner unit - Engine-mounted hydraulic pump, engageable via magnetic clutch - Oil tank, pipework/hoses/quick couplings - The required two hydraulic connections for the gully cleaner are installed on the right below the tipper body - Rear tipping function is maintained when the gully cleaner is connected - Additionally: separation points for hydraulic lines at the rear crossmember for lateral tipping (to the right or left) - Chassis corrosion protection for the underside - All-season tires 205/75 R16 C M+S - 2 LED work lights (1 rear on roof, 1 lateral below)

Condition: used, Year of construction: 2004, machine/vehicle number: 467-76, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 680 CNC Pin Grinder Hedpfxsxxx Rpo Aa Eeg crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to

Condition: refurbished (used), Year of construction: 2015, operating hours: 6,840 h, functionality: fully functional, grinding length: 1,600 mm, grinding width: 600 mm, feed length X-axis: 1,700 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, grinding wheel diameter: 400 mm, distance table to spindle center: 950 mm, table length: 1,600 mm, table width: 600 mm, grinding wheel width: 30 mm, overall weight: 8,000 kg, grinding spindle motor power: 15,000 W, Equipment: documentation/manual, rotational speed infinitely variable, CNC surface grinder BLOHM Planomat 616 HP TECHNICAL CHARACTERISTICS : Year of manufacturing : 2015 CNC control : SIEMENS 840D SL Maximum grinding lenght x width : 1600 x 600 [mm] Stroke X axis (table movement) : 1700 [mm] Min. Stroke speed X axis : 30 [mm/min] Max. Stroke speed X axis : 30000 [mm/min] Resolution X axis : 0.001 [mm] Hodox H Ruxepfx Aa Ejg Stroke Y axis (vertical movement) : 800 [mm] Min. Stroke speed Y axis : 4 [mm/min] Max. Stroke speed Y axis : 6000 [mm/min] Resolution Y axis : 0.001 [mm] Course axe Z (transverse movement) : 560 [mm] Min. Stroke speed Z axis : 4 [mm/min] Max. Stroke speed Z axis : 6000 [mm/min] Resolution Z axis : 0.001 [mm] Min. distance spindle nose / table : 150 [mm] Max. distance spindle nose / table : 950 [mm] Grinding spindle motor power : 15 [kW] Max. diameter grinding wheel : 400 [mm] Max. grinding wheel width : 30 [mm] Grinding wheel bore : 127 [mm] Dimensions of magnetic plate : 1600 x 600 [mm] Machine dimensions : 5450 x 3560 x 2800 [mm] Supply voltage : 400 [V] Number of hours under power: 6840 [h] Weight : 8000 [Kg] EQUIPMENT INCLUDED: x1 coolant tank + paper filtration system DGS type SBF150/650 x1 oil mist extractor (2000 m3/h) SARA type UC 2 SD/S3 x1 1600*600 [mm] electromagnetic clamping plate SAV type B-243.70 - 1600 x 600 - 13 x1 lifting dressing device for peripheral, side and profile dressing x5 grinding wheel flanges x15 grinding wheels Ø400 [mm] x1 wheel balancing bench x1 set of manuals + CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to the brands okamoto , jones shipman , jung , favretto , studer see also cylindrical grinder , lathe , machining centre , milling machine

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 100 kg, wheel width: 400 mm, grinding wheel diameter: 400 mm, helix angle: 45 °, table diameter: 180 mm, table load: 100 kg, wheel diameter: 400 mm, overall weight: 10,000 kg, travel distance Z-axis: 660 mm, Equipment: documentation/manual, CNC Gear Grinding Machine HOFLER HELIX 400KK Diameter-Ø max: 400mm Dimeter-Ø min: 10mm Number of teeth variable Profilhöhe max: 35mm Modul: 1-10 Grinding head inclinaison: 45° Spindle speed max: 5400 1/min Counter height max: 745mm Table weight: 100 kg Total weight ca. 10000 kg Werkzeugdaten: Grinding wheel-Ø max: 300mm Grinding wheel-Ø min: 80mm Width max.: 30mm bore-Ø: 160mm Siemens 840 D Alle Achsen CNC gesteuert Ölnebelabsaugung Filtration unit Hydraulic clamping Hjdpfx Aaox Nfwaj Ejg Dittel balancing unit Accessories with machine available : Various grinding wheel available 1 Diamnod disc Tailstock rotative and fixed( fest und mitlaufend )

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Hsdjvvi Rfjpfx Aa Eog

Condition: excellent (used), Year of construction: 2018, Pilot filtration plant designed for NF/RO filtration (MF/UF operation also possible). The system includes a reverse osmosis (RO) unit—prepared for operation but without the 8" filter housing. Hjdox Ek D Ropfx Aa Eog The installation is built on a mobile stainless-steel frame equipped with four adjustable feet. It includes a double-jacketed balance vessel with a total capacity of 100 liters, fitted with two level sensors and one temperature sensor. The vessel is equipped with a Typhoon mixer (model 03TY0196) featuring a round blade, 0.44 kW motor, and 1,690 rpm speed. The system is fitted with three E&H flow meters and a Hydra-Cell pump (model G10XDS0SFEMB) capable of handling pressures up to 103 bar and viscosities up to 1,000 mPa·s. The pump is a piston-diaphragm type with a seal-less design, driven by a 3 kW motor (7.2 A, 949 rpm, 50 Hz). Additional components include a Samson steam valve, two overpressure valves, and a tubular heat exchanger for retentate cooling via ice water. A high-pressure centrifugal circulation pump (Pomac make) is also installed. Control and monitoring are managed through a Simatic OP7 operator panel and a Siemens Simatic S7-300 PLC housed in an electrical panel, which also contains three Siemens frequency converters and an E&H data recorder. Documentation: Electrical schematic available.

Condition: good (used), functionality: fully functional, “Steinert NES 100 220 E 5009” for Sale Hodpfx Asxb S Sroa Eeg Manufacturer: Steinert Type: NES 100 220 E 5009 Belt widthness: 1.000 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Hedsvvi Scspfx Aa Esg

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Hsdpfx Aaew Aifzj Esg

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · Travel distance X-Y: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm The basic frame structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded triangular plates, making it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the secret to permanent precision and stability. The layout of the machine allows the operator an optimal workflow while requiring minimal floor space. The resulting frame provides a balanced and secure base for the machining unit with outstanding load distribution. The mobile aggregate carrier is constructed as a solid monoblock. It is positioned along the X-axis on prismatically ground guides via recirculating ball carriages. The machining unit, in turn, is mounted to the mobile carrier using prismatic, ground rails and recirculating ball carriages. Description of aggregates and accessories (basic configuration) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) Hodex Iwc Sopfx Aa Eeg · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill mount: M10 with 11 mm fitting Grooving saw unit in X: · Integrated into the drill head · Grooving saw blade up to max. 120 mm diameter Main milling unit (position 2): · Tool holder HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Includes: 4 tool holders (right), without collets R8L Tool changer Automatic tool changing system for 8 tools. Moves along with the rear aggregate carrier for quick tool access. · Number of tool slots: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg · Max. total tool weight: 22 kg · Adapter for 1 angle gearbox · Travels in X direction Horizontal milling unit (position 1) Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm, infinitely variable via inverter · 1 output for collet 3–20 mm (ER 32) · 1 output for saw/collet 3–12 mm (ER20) (for saw D=120 mm / 50 mm bore) · Motor power: 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Worktable The worktable is designed to provide the operator with maximum freedom of movement. The quick-action vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of the workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X · 12 vacuum cups, round, D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · The retractable reference stops are CNC-controlled · Pendulum operation standard (2 working fields) --- other clamping systems optional --- Axis movement The drive system for X, Y, and Z axes uses ground recirculating ball screws of the highest precision class. The recirculating ball drive...