Used Turbocharger for sale (176)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RERS 0193, workpiece weight (max.): 16 kg, total width: 820 mm, total length: 1,940 mm, total height: 1,660 mm, input current: 6 A, input voltage: 230 V, Schenck TB Sonio high-speed balancing machine for turbocharger rotors. The machine is in full working order and is currently in use (operation is performed using a computer mouse; the touchscreen function does not work – this is a factory defect of these monitors). Gsdpfx Aijz R Nq Rskobw The balancing machine is sold with 83 adapters for balancing turbines.

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Gjdsq Nin Uepfx Aikjbw

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Gedpfx Aijq I Rz Rokobw

Condition: used, Year of construction: 2005, operating hours: 8,592 h, Equipment: all wheel drive, Just arrived! Liebherr 524 - excellent machine for storage operations!!! No particulate filter - no AdBlue - no exhaust gas treatment!!! TOP Godpfx Ao Ad Ta Hjikobw Chassis number: VATZ0438AZB013004 Year of manufacture: 2005 Recorded operating hours: 8592 Liebherr 4-cylinder inline engine, water-cooled with turbocharging and charge air cooling, 86 kW - 118 hp, Version: 33 km/h - hydrostatic drive with 2 speed ranges * Air conditioning * 2 additional headlights on the front of the cab roof * 1 additional headlight on the rear of the cab roof * Debris screen in front of the radiator * Air intake with pre-separator "TopAir" * Road approval possible! * Tires 17.5 x 25 front, 2 x 50% tread * Tires 17.5 x 25 rear, 2 x 40% tread Purchase price for fixed-mount bucket, approx. 2.2 cubic meters: 28,900.00 EUR net, export/domestic, plus 19% VAT. Optional equipment available at an extra cost: Quick coupler, hydraulic, 3,550.00 EUR * High-dump bucket from 3.0 cbm from 4,950.00 EUR * Bucket with lowering device for quick coupler, 3.0 cubic meters from 3,660.00 EUR * Volume bucket 4 cubic meters 4,500.00 EUR * 4-in-1 bucket 2 cubic meters on request. * Pallet fork 5 or 8 tons from 2,190.00 EUR All prices net, plus 19% VAT. Inspection by appointment only! Sale only to commercial businesses or for export. Sale in "as is" condition, as the machine stands. No guarantee or warranty. The indicated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a warranty in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately. We will also accept your vehicle as part of the payment. We are available to answer any further questions you may have. For our customers from abroad, we prepare all customs and export documents for a smooth transfer to their country.

Condition: used, 2 x DETROIT DIESEL – Diesel engine Name: 12V-71TI Marine Gear Model: 7122-7302 Engine numbers: 12VA81375 ZF gear type: IRM350PL.1 ZF gear numbers: 20008107 ----- Name: 12V-71TI Marine Gear Model: 7122-7302 Engine numbers: 12VA81377 ZF type: IRM350PL.1 ZF numbers: 20007942 ----- Engine power: 613.7 kW (835 HP) at 2300 rpm Year of manufacture: 1975 Description: Turbocharged-Intercooled Number of cylinders: 12 Gedpfx Aisxnbkqokobw Bore and stroke: 4.25 in x 5 in (108 mm x 127 mm) Displacement: 852 cu in (13.97 liter) Compression ratio: 17 to 1 Net weight: 5200 lbs (2359 kg) ----- Westerbeke / Mecc Alte generator Westerbeke engine Model: 16.0 / 20.0 BEDA Spec: 50 / 60 HZ 3PH Serial No.: U20246-D904 Generator Brand: Mecc Alte Spa Type: W31-140/4 Kva: 20 Rpm: 1800 Phase: 1 Volt: 120 / 240 Amp: 166.6 / 83.3 Kg: 135 Date: 2000 Hours: 366 Price on request Delivery terms: Delivery time: ex stock, subject to prior sale Delivery: ex Baarle-Nassau Payment: prior to collection Prices: net, excl. VAT. Machinehandel De Leeuw bv Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT / GST number: NL800103026B01 Chamber of Commerce Tilburg 18034279

Year of construction: 2020, condition: used, LM Trac 287 carrier vehicle from 2020, offered via the online auction ‘Government Auction Heerenveen’. Specifications: • Registration number: TKK-19-X • Date of first registration: June 30, 2020 • Engine: Perkins 1.7 liter 3-cylinder turbocharged diesel engine • Power: 36 kW / 48 hp Gedpfe Aiq Iuox Aiksbw • Maximum speed: 25 km/h • Hydrostatic drive with two hydraulic gears, switchable via the display • Operating hours: not specified • Lot number: 8111-15 View the photos and the complete lot description via the auction link. We advise interested parties to visit the viewing appointment to assess the condition and specifications of the machine themselves. Bidding is only possible via the online auction. Bids exclude auction costs and any applicable VAT. Awarding will take place after approval by the client.

Condition: excellent (used), functionality: fully functional, mileage: 18,491 km, gearing type: hydrostat, fuel type: diesel, color: red, overall weight: 28,000 kg, empty load weight: 28,000 kg, tire condition: 80 %, drive condition: 80 %, axle configuration: 4x4, number of seats: 1, mast type: telescopic, suspension: parabolic leaf (spring), Year of construction: 2008, operating hours: 18,491 h, Equipment: additional headlights, adjustable chassis, air conditioning, all wheel drive, cabin, hammer hydraulics, hydraulics, onboard computer, parking heater, For sale: a 2008 JAMA SBU 8000, a specialized, self-propelled rock breaker designed for use in mines and tunnels. The machine is equipped with a boom and an Epiroc hydraulic hammer, used for removing loose rock fragments from the roof and walls and preparing the excavation for further work. A significant advantage is the ability to operate using an internal combustion engine or external electrical power. When connected to a suitable electrical grid, the working unit can operate with the diesel engine turned off. This allows for rock breaking without emissions from the machine's engine in the workplace, a particularly beneficial solution in tunnels and enclosed underground excavations. Additionally, the machine has a compressor mounted in the rear. MACHINE SPECIFICATIONS • Make and model: JAMA SBU 8000 • Year of manufacture: 2008 • Serial number: 8018 • Weight according to nameplate: 28,000 kg • Working equipment: Epiroc hydraulic hammer • External electrical power: 1000 V • CE marking INTERNAL COMBUSTION ENGINE – DEUTZ The machine is equipped with a Deutz TCD 2013 L06 2V six-cylinder industrial engine. This is a turbocharged diesel engine with liquid cooling and intercooling, designed for use in heavy-duty construction machinery. • Model: Deutz TCD 2013 L06 2V • Type: four-stroke diesel engine • Cylinder arrangement: inline, 6-cylinder • Displacement: 7146 cm³ / approximately 7.15 l • Rated power according to the engine nameplate: 200 kW / approximately 272 hp • Rated speed: 2300 rpm • Turbocharging: turbocharger with intercooling • Fuel injection system: Common Rail • Cooling: liquid Gsdpfx Aio Afihisksbw • Number of valves: 2 per cylinder • Cylinder bore × piston stroke: 108 × 130 mm • Electronic engine management • Unit labeled with Deutz Xchange – manufacturer's engine exchange program OPERATION WITH ELECTRICAL POWER • Possibility of powering the working unit from an external electrical grid • Operation of the equipment with the internal combustion engine turned off • No emissions from the diesel engine during electrical operation • Cavotec cable reel • A solution particularly useful during long-term work in tunnels and underground excavations EQUIPMENT • Working boom with Epiroc hydraulic hammer • Compressor in the rear of the machine • Hydraulic stabilizing supports • Hydraulically controlled front blade • Enclosed operator cab • Control panels with emergency stop buttons • Presto fire suppression system • Hydraulic system for operating the boom and equipment The JAMA SBU 8000 is a machine for companies involved in tunnel construction, underground mining, and rock breaking. The combination of the Deutz engine, the ability to electrically power the working unit, and the Epiroc hammer allows you to adapt the method of operation to the conditions prevailing in the excavation. Please contact us for detailed information and to arrange a viewing.

Condition: new, Turbocharger core balancing machine DBST-20 Low-speed turbocharger core balancing machine meets the needs of turbocharger repair workshops. Machine is used for balancing common truck and passenger car turbos. It is multi-functional and universal, so it is suitable for many large turbochargers of special vehicles, railroad and marine turbines, and even for industrial turbochargers of gas and diesel power plants. The DBST-20 is used for balancing common truck and car turbochargers. It is multifunctional and universal, so it is suitable for many large turbochargers of special vehicles, railway and marine turbines, and even industrial turbochargers of gas and diesel power plants. This stand allows for the final balancing of cartridges due to the specific design features of large turbines. The stand is used for balancing turbocharger cartridges at low speeds, as well as for checking turbocharger cartridge oil leaks. Gbsdpfx Aon Nxcfeikew This is a larger version of the DBST-10 model that our company has developed specifically for large turbochargers weighing up to 30 kg. HIGHLIGHTS High accuracy of determining the unbalance of the rotor (0.4 g ∙ mm / kg). Reinforced torsional vibration suspension - high accuracy of vibration transmission, quality balancing results. Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos. Includes adapters for installing turbochargers with lower oil inlet. Oil system with oil heating allows to recreate similar conditions to the real one during balancing. 3-stage system of oil filtration allows to eliminate an unbalance directly on the machine by portable grinders. The measuring system displays the balancing process in real time and monitors the rotor unbalance behaviour on the screen to achieve the best possible result. Rotor adjustment and machine calibration are performed by the operator, ensuring maximum machine sensitivity at all times. Safe turbo shaft speed allows risk-free quality running-in of assembled cartridges, which significantly increases cartridge reliability after repair. KEY FEATURES • High accuracy 2 plane balancing • Truck and car turbocharger balancing • Any turbocharger can be installed • All type turbocharger adapters included • Quick and easy turbo core installation • Balancing speed up to 10 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Calibration of the machine by the operator • Industrial fanless touch screen PC control system • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum turbocharger weight 30 kg Maximum turbocharger diameter 300 mm Maximum turbocharger length 300 mm Maximum rotation speed 10 000 rpm Minimum achievable residual specific imbalance, 0,4 g mm/kg Pneumatic system operating pressure 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1350 mm Weight 285 kg

Condition: excellent (used), functionality: fully functional, mileage: 16,300 km, gearing type: hydrostat, fuel type: diesel, overall weight: 30,800 kg, empty load weight: 30,800 kg, lifting height: 6,900 mm, drive condition: 90 %, chain condition: 90 %, number of seats: 1, shovel volume: 3 m³, suspension: steel, Year of construction: 2018, operating hours: 15,999 h, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, head guard, hydraulics, low noise, onboard computer, rear pickup, steel tracks, tilting carriage, An authorized SUBARU dealer in Łaziska Górne has a Japanese-made CAT 330D2L crawler excavator for sale, complete with a set of three buckets and a soil loosening hook. Inspected by our mechanics, the hydraulics are fully functional and have minimal play. It has been nicely refurbished and prepared for further heavy-duty work. It features 60cm wide steel tracks, a GPS MC3000 for precise digging, and is additionally equipped with 360-degree cameras. WE OFFER AFFORDABLE TRANSPORT THROUGHOUT THE EUROPEAN UNION AS A PROMOTION WITH OUR FLEET! The price includes a complete set of documents for registration. We offer every form of payment: Leasing, credit, cash, and bank transfer. With cash payment or bank transfer, you can drive the vehicle away from the dealership immediately. Additionally, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid cars and trucks to the specified address throughout Europe. More information about our services is available from our sales representatives. Engine: Model: Caterpillar C7 Type: diesel, 6-cylinder, turbocharged, intercooled Displacement: 7.2 l Power: 204 kW (approx. 277 hp) Fuel injection: HEUI (hydraulic-electronic) Operating parameters: High torque at low speeds Very good cooperation with the hydraulics Stable operation under heavy load Advantages: Simple and durable design Low operating costs No complex exhaust emission electronics Proven unit for heavy earthmoving work Hydraulic system: Maximum working pressure: 35 MPa Pressure in lifting mode: 38 MPa Pump flow rate: approx. 480 l/min Rotation pressure: approx. 29.8 MPa Working forces: Bucket digging force: approx. 179 kN Arm digging force: approx. 126 kN Swing mechanism: Swing speed: approx. 11.5 rpm Torque: approx. 110 kNm Operating parameters: Maximum digging depth: approx. 7.2 m Maximum reach: approx. 10.7 m Loading height: approx. 6.9 m Maximum digging height: approx. 10 m Working equipment: Bucket capacity: approx. 1.5–1.8 m³ Boom length: approx. 6.15 m Arm length: approx. 3.2 m General parameters: Operating weight: 30800 kg Undercarriage: LC (Long Carriage) Track width: approx. 600 mm Application and main features: High digging force and efficient hydraulic system Simple and durable engine design with no complex exhaust emissions Very good parameters for heavy earthmoving and loading work Transport dimensions: Transport length: 10.4 m Transport width: 3.19 m Transport height: 3.35 m Undercarriage width (LC): 3.19 m Track length on the ground: 4.0 m Gedszadcbepfx Aikobw The stated price is net and applies to exports and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price!

Year of construction: 2025, operating hours: 225 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973LZT031244, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) Gbsdjztakyspfx Aikew - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. Gbodjn E S T Uepfx Aikjw HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: used, mileage: 40,382 km, first registration: 06/1987, fuel type: diesel, gearing type: mechanical, machine/vehicle number: 3617, Equipment: all wheel drive, differential lock, This UNIMOG is equipped with a powerful crane on a vehicle that can be driven with the old driver’s license class 3 (up to 7.5 t GVWR). The base vehicle is a U 1300 L with a turbocharger and quick axle, and it comes from the German Armed Forces. The UNIMOG is rust-free. The cab has been painted and cavity-sealed. The vehicle frame has been treated with our special preservation method. Gedpfx Aiofmfp Hekebw The crane is a modern Palfinger 9501, manufactured in 2004, and is in top condition. Four hydraulic outriggers enable quick and convenient operation with an outreach of approximately 10 m. Retrofitting additional mechanical outriggers is possible. The radio remote control is original and can be operated with great precision. We offer you the following, subject to availability, errors and prior sale: 1 used UNIMOG 1300 L with Palfinger crane PK 9501 Internal number: 3617 First registration: 06/1987 Mileage: approx. Power: 100 kW / 136 hp Total weight: kg Towing capacity: kg Quick axle ratio Engine OM 366, turbocharger Palfinger crane PK 9501 Year of manufacture: 2004 Radio remote control 4 x hydraulically extendable Load values: (according to inspection certificate) 4.1 m – kg 5.6 m – kg 7.6 m – 920 kg 9.8 m - 690 kg 11.9 m - 550 kg

Year of construction: 2025, operating hours: 210 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973KZT03151, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting Gbsdpfx Aiez Hx Rcekew - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Condition: used, operating hours: 601 h, machine/vehicle number: 37122306, fuel type: diesel, motor manufacturer: KTA19-G1, General information Year of manufacture: 1988 Field of application: Construction Weights Empty weight: 9.000 kg Functional Generator capacity: 675 kVA Dimensions of cargo space: 650 x 205 x 280 cm CE mark: yes Gbodps Ai I Amjfx Aikow Other information Generator: Stamford HC634AS Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel, Steel canopy Water tank volume: 1000 l Production country: NL Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Steel canopy - Tank = Remarks = Last service inspection report: Following our inspection and assessment of the KTA engine, we offer the following minimum recommendations: To begin with, it is not advisable to continue operating the engine given the defects identified. Upon removing the cylinder heads, we observed that all cylinder liners exhibit scoring. This appears to be damage resulting from thermal overload and/or markings caused by carbonized oil. It is likely that contamination within the cooling system impaired cooling efficiency, leading to the development of "hot spots" or localized boiling. Alternatively, it is possible that oil combustion occurred, with the resulting hard carbon residue causing scoring as it accumulated around and within the piston ring grooves. Over time, this will lead to increased "blow-by" and exacerbate the already excessive oil consumption—which, in turn, will negatively affect exhaust emissions and engine power output. Furthermore, it is clear that virtually all the gaskets and sealing rings we examined have hardened and dried out. This will inevitably lead to leaks. Should the seals around the cylinder liners fail, coolant could enter the oil system, creating a high risk of damage to the bearings or the engine block itself. In summary, our recommendations are as follows: • Remove the engine from the unit to allow for the extraction of the cylinder kits. • Transport the engine to the workshop in Maassluis. • Disassemble the engine (remove cylinder kits). • Replace the cylinder liners and piston rings; clean and measure the pistons, reusing them if they are within specifications. • Perform a minor overhaul of the cylinder heads, including the removal of excessive carbon deposits. • Testing and recalibrating the injectors • Cleaning and adjusting the fuel pump • Cleaning the aftercooler • Overhauling the fouled turbocharger • Cleaning the engine block and the cooling system • Replacing the (hardened) crankshaft oil seal • Engine assembly • Engine start-up (no-load)

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, An authorized SUBARU dealer in Łaziska Górne has a Vermeer D9x13 Series 2 horizontal directional drilling rig from 2012 for sale, with 5650 operating hours. We specialize in importing and selling these Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 HP / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Gjdpfx Aijzumt Rjksbw Additionally available: We also have a small Ditch Witch FT5 drilling fluid pump/mixer from 2021, which is a great match for this model and provides a practical set for small and medium-sized drilling projects. Ditch Witch FT5 – key data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 HP Dimensions: approximately 185 × 81 × 136 cm Weight: approximately 182 kg Option to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid pump. The stated price is net and applies to export and business customers. A significant discount is possible for individual customers – Please contact us directly by phone to get your best price.

Condition: used, Year of construction: 2007, Equipment: all wheel drive, Liebherr wheel loader L 538 2 plus 1 VIN: VATZ0433 HZB018618 No particulate filter - no exhaust gas treatment - Adblue, etc. Year of manufacture: 2007 Operating hours according to hour meter: approx. 11,600 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 142 hp, hydrostatic drive with 3 travel ranges, travel speeds: travel range 1: 0 - 6.0 km/h, travel range A1-2: 0 - 16.0 km/h, travel range A1-3: 0 - 34.0 (40) km/h, machine length: 7,200mm, width 2,500mm (depending on the bucket), height 3.28 meters * 3rd hydraulic control circuit (for silo block cutter, high-dump bucket, etc.) * Central lubrication system * Air conditioning * Fuel pre-filter Gsdpfxe Adxc To Aikebw * Driver's seat with pneumatic suspension * Ride vibration damper * Reversing fan for blowing out the radiator * Radio (function not checked) * Adjustable steering column angle * Air conditioning * 2 work lights on the rear of the cab roof, LED * 4 work lights on the front of the cab roof Operating weight: approx. 14,000 kg, permissible total weight 16,000 kg Tires: 20.5 x 25 VA L3 - 25%, 20.5 x 25 HA L3 - 15% Offer with permanently installed bucket 2.5 cubic meters from EUR 31,500.00 net. Equipment available for an extra charge: * Quick coupler system Liebherr with hydraulic preparation EUR 3,550.00 * 4-in-1 bucket (clamshell bucket, grading bucket) 2 cubic meters EUR 3,950.00 * Volume bucket 3.5 cubic meters EUR 3,990.00 * Bucket with bottom extension from 2.0 cubic meters to 3.5 cubic meters EUR 3,660.00 * High-dump bucket from 2.5 to 5.0 cubic meters from EUR 5,990.00 * Pallet fork 5 tons from EUR 1,850.00 Available with used weighing system! Pfreundt WK 50 at a price of EUR 3,900.00 - all prices net + VAT. Export sales only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are readings from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information it contains serve only to generally identify the vehicle and do not constitute a guarantee in the legal sense. The information provided does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We will also gladly accept your vehicle as a trade-in. We are available to answer any further questions you may have. For our customers from abroad, we prepare all customs and export documents for a problem-free transfer abroad.

Condition: used, Year of construction: 2017, operating hours: 8,340 h, Great machine! ? Good condition ? No issues ? No oil leaks! VIN: VATZ1265CZB044737 Year of manufacture: 2017 Operating hours: 8350 original hours Liebherr service maintained Special factory paint: RAL 1027 curry yellow 4-cylinder in-line engine, water-cooled with turbocharger, 103 hp Hydrostatic drive with 2 speed ranges - max. 32 km/h * Standard Z-linkage * Ride shock absorber - linkage damping * Quick coupler with hydraulic attachment kit * Central lubrication system, factory-installed Liebherr * 3rd hydraulic circuit for tipping/clamshell/or 4-in-1 bucket * Lamp bracket in steel instead of plastic * Towing hitch, rear * Driver's seat "Comfort" with suspension * Radio Comfort Gsdpjyqn Hlofx Aikobw * 2 work lights on the rear of the cab roof, LED * 2 work lights on the front of the cab roof, LED * Adjustable steering column * Rotating beacon - flashing light - cab roof, center * Crane/lashing eyes on the rear and front * Fire extinguisher * Road approval 32 km/h * Tires 17.5 x 25 L3 front 2, 95% like new!! * Tires 17.5 x 25 L3 rear 2, 95% like new!!! Permissible total weight approx. 10500 kg, operating weight approx. 8500 kg Offer with quick coupler and standard bucket 1.6 cbm - at a price of 39,900,-- € net, export/domestic + 19% VAT Equipment available at an extra cost: · Folding bucket, 2 cubic meters, from 3,550,-- € · Tipping bucket · Screening/mixing bucket, manufacturer "Wolf" · Pallet fork 5 tons, from 2,190,-- € Prices net + VAT or export Sale only to commercial customers or for export. Sale as is, in the condition the machine is in. No guarantee or warranty. The mileage or operating hours stated are read from the odometer or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of the purchase contract. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment may need to be checked separately. We will also gladly accept your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our customers from abroad, we prepare all customs and export documents for a trouble-free transfer to the country.

Condition: used, functionality: limited functionality, machine/vehicle number: 2152, mileage: 923,000 km, power: 324 kW (440.52 HP), first registration: 02/2016, fuel type: diesel, empty load weight: 7,999 kg, overall weight: 18,000 kg, tire size: 295/60/22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 960 l, brakes: intarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2016, Equipment: ABS, AdBlue, EBS, USB port, additional headlights, air conditioning, car registration, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, lane keeping assist, low noise, navigation system, non-smoking vehicle, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, traction control, XL cab with high roof and 2 beds, refrigerator, adaptive cruise control, hill start assist etc., spoiler package, 2 fuel tanks, rotating beacons, German vehicle from first owner. New EGR and turbocharger! Sale only to commercial buyers and excluding any warranty. We deliver to any German seaport. Engine damage! Engine runs but has high crankcase pressure. Loading possible. Godpfjyrz Ifex Aikobw

Condition: used, mileage: 22,000 km, power: 90 kW (122.37 HP), first registration: 11/1997, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2028, color: red, gearing type: mechanical, emission class: euro1, number of seats: 2, total length: 6,735 mm, total width: 1,933 mm, total height: 2,870 mm, Year of construction: 1997, Equipment: ABS, parking heater, Very good Sprinter from the Ministry of the Interior, subsequently stationed at the local fire department. Only 21,900 total kilometers driven. New TÜV inspection (German vehicle inspection), passed directly without any defects, valid until September 2028. The inspector was impressed with the outstanding condition of the vehicle; no rust could be detected. MAXI panel van L3H2 WITHOUT sliding door. The vehicle has been used up to the present day solely as a radio command vehicle / operations management vehicle (ELW) / radio patrol car by the civil protection agency and then by the fire department. The 312 D was therefore a mobile command center and means of communication, primarily used at major events. The Sprinter was always kept in a heated hall, it was rarely, but regularly, moved, and it was also regularly serviced (last service 1,000 km ago). Previously registered as "Other motor vehicle, fire department vehicle, radio command vehicle". Registered unladen weight: 2890 kg. Permissible gross vehicle weight (original): 3500 kg. Can be driven immediately with a German car driving license. Overall length 6735 mm, width 1933 mm, height with radio equipment/antennas 2870 mm. Tire size 225/70R15C. Hankook winter tires with snowflake symbol, DOT 2024. Like new condition. Gbedpfxsz D N Aws Aiksw Engine OM 602 five-cylinder diesel with turbocharger, 2874 ccm and 122 hp. 5-speed manual transmission. Driver's airbag. ABS and ABD (anti-lock braking system and automatic differential lock). Auxiliary heater from EBERSPÄCHER. Power steering. Ball-type trailer hitch ORIS with 2000 kg braked trailer load and 750 kg unbraked trailer load. In addition, there are sturdy running boards on both sides for easier access to the operations management/radio area. 2 seats are registered in the vehicle documents for driving. The seats on the transverse benches at the rear of the radio compartment are only permitted for stationary use. Since there are 2 small radio workstations installed on the partition wall behind the driver and passenger seats, the front seats have the popular "swivel function." If the vehicle were to be converted into a motorhome and the partition wall removed, the swiveling seats in the cab would already be present in their original configuration. The partition wall also has a pass-through to the crew compartment. Above this, a large fuse box is mounted for the superstructure technology. A lockable maintenance hatch on the left side allows the vehicle to be connected to shore power; a telephone connection is also installed here. The original 230-volt power cord is included. Equipped with a special signal system and pneumatically extendable antenna mast. The conversion into a radio patrol car was carried out in outstanding 1990s quality by the company BINZ. This is an excellent Sprinter from the first series with durable, robust technology, plenty of space, and already installed high-quality furniture and technology in the interior. This MAXI Sprinter can be driven directly with a car driving license and still has a decent payload in its current configuration. We installed 5 new glow plugs in 09/2026. Otherwise, apart from the new main inspection, nothing had to be done on this great vehicle. The 312 D-KA is immediately available and is waiting for new tasks. This offer applies only to commercial businesses and freelancers of all kinds and industries, as well as to authorities / emergency services of any nature. Direct sale to private e

Condition: used, mileage: 215,564 km, power: 80 kW (108.77 HP), first registration: 11/2008, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2027, color: white, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 7,050 mm, total width: 2,170 mm, total height: 3,100 mm, Year of construction: 2008, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Known defects: The engine control light is active. The vehicle does not deliver full power. Suspected defect in the turbocharger. The vehicle is roadworthy, no smoke, etc.----Mercedes-Benz Sprinter 311 cdi box van, second owner. MOT/emission test (TÜV) – valid until 04/2027. Due to previous use in gardening and landscaping, the cargo area is worn. New all-season tires and new brake discs and brake pads on the front and rear axles.----Special equipment: Battery 100 Ah, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, seats in the cab: passenger double seat, seats in the cab: driver's seat comfort, rear stabilizer reinforced, front stabilizer reinforced, front axle reinforced Additional equipment: Gbedpfx Aioz N Rhgjksw Airbag driver's side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, headliner in the cab, lockable glove compartment, body/superstructure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, engine 2.1 liters - 80 kW CDI CAT, wheelbase 4325 mm, low emission according to emission standard Euro 4 Group III, service interval display Assyst, heat-insulating glazing, permissible total weight 3.50 t

Condition: excellent (used), functionality: fully functional, mileage: 553,123 km, power: 536.91 kW (729.99 HP), first registration: 07/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, lane keeping assist, low noise, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, SCANIA R730 *V8* / Premium and luxury packages ! TOP equipment ! 2-Pieces in stock / 2-Pieces in stock ! Equipment details: Engine: 730 HP Euro6 Transmission: OPTICRUISE (Kickdown Opticruise) Eco-Roll function Opticruise shift program Economy, Standard, Power Turbocharger reinforced SCANIA RETARDER Differential lock PREMIUM long-distance cab equipment Aerodynamic tractor unit Wind deflector LED EQUIPMENT Black PREMIUM driver's seat + passenger seat with V8 embossing DRIVER'S SEAT VENTILATION (seat climate) + heating Extendable lower bed 800-1000mm Wood/leather steering wheel with airbag Driver's side airbag Black leather door trim Luxury dashboard design Backlighting below the dashboard Dashboard passenger side with table Dashboard woodgrain trim Premium instrument cluster Infotainment system Premium 7'' display Infotainment voice control STANDBY AIR CONDITIONING SYSTEM Scania original Extra cab heating water/air 3kW Air conditioning Air conditioning and heating system LED headlights LED fog lights 3-diode LED daytime running lights + position/marker/outline/indicator LED tail lights LED work lights on rear wall of cab High beam headlights in front grille Cab suspension air comfort Double-glazed door window WSS tinted Roof spoiler height-adjustable manually with crank ALCOA DuraBright alloy wheels with MICHELIN tires Special paint finish frame + plastic parts Front grille paint V8 black (Ebony/Black Brilliant) Contrasting black door/side panel (glass) Aluminum checker plate cover up to fifth wheel coupling Aluminum checker plate tool box, right on frame Frame special paint finish + plastic parts Additional interior fittings: Engine tunnel cover Black leather trim Electric roof hatch incl. mosquito net Roof liner backlighting Backlighting cab rear wall Ambient interior lighting Side sun visor inside driver's side Roller blind Black leather floor mats Side AIRBAG driver's side Equipment packages: Premium infotainment package with NAVIGATION 7'' display and driver package Premium driver package with armrest (Opticruise) Seat upholstery package LEDER black MCC Underline package 2 with side trim Safety package with assistance systems Comfort package CR cab Light package Climate system package Air conditioning+ Premium + with heating Assistance systems: Assistance systems Scania AEB (Emergency Brake Assist) + Scania LDW (Lane Departure Warning) + Scania ACC (Adaptive Cruise Control) Scania AEB (Emergency Brake Assist) Scania-ACC (distance control) Scania-LDW (Lane Departure Warning) Communication: Infotainmant System Premium 7'' display Infotainment voice control Map data Europe Bluetooth for radio Infotainment switch in the steering wheel Speakers Premium Version 4x20W Dual Coil Radio with DAB (Digital Audio Broadcast) Cell phone preparation Speedometer remote download (switch) Scania Comunicator C300 etc. ... VA tires: 385/65R22.5 ...MICHELIN... HA tires: 315/80R22.5 ...MICHELIN... Godpfx Aoq H Tgtoikjbw 1st owner / 1st owner SCANIA Servicegepflegt / SCANIA Service maintained ! für weirere Info's / for more Info Mobile-Tel.: +43 664 4477030 Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We take care of all customs matters for you. Where to put the used car? ...if you agree, we will be happy to trade it in. The offer is non-binding and subject to change. Subject to errors and prior sale.

Condition: used, Year of construction: 1974, operating hours: 474 h, functionality: limited functionality, overall weight: 3,500 kg, power: 280 kW (380.69 HP), MWM Diesel Emergency Power Generator 280 kW - Piller Generator We offer an emergency power generator for sale. ⭐︎ Condition: The generator is used and in good condition. ⭐︎ Condition: good (used) Fully functional and well maintained! Recently dismantled! Gsdpewv Uzujfx Aikjbw MWM Generator Set 280 kW ++ incl. electrical control cabinet + battery Manufacturer: MWM, Germany Engine: - Manufacturer: MWM - Engine type: TBD 232 V 12 - 12 cylinders - Turbocharged - Diesel - Water-cooled - 1500 rpm Generator: - Manufacturer: Anton PILLER (Germany) - 280 kW - 231 / 400 Volt - 50 Hertz - Operating hours meter: 474 hours Condition: - The generator was used occasionally for backup power in a public building - It has only run 474 hours - Regular maintenance and test runs have been carried out ⭐︎ For further technical details, please see the photos. Scope of delivery as shown Viewing before purchase is possible and expressly encouraged. All items are dismantled, cleaned, and visually inspected for damage by our qualified staff before sale. All relevant data/information can be found in the description and images. All information is given to the best of our knowledge and belief. The offered item is sold as described and as inspected. International buyers welcome Please ask for shipping costs to Europe and overseas Scope of delivery: - MWM generator set 280 kW - Electrical control cabinet Shipping: - Nationwide shipping within Germany is possible at extra cost - To provide an exact freight quote, please send an inquiry with your postal code

Condition: used, mileage: 276,773 km, power: 115 kW (156.36 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,963 mm, total width: 2,010 mm, total height: 2,660 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: Iveco 35S16 SV panel van (Vehicle 11) First registration: 15.08.2019 276,773 km Engine: 2,287 ccm 115 kW / 160 hp Euro 6 Permissible total weight: 3,500 kg TÜV (technical inspection): 09/2027 Unladen weight: 2,397 kg Payload: 1,103 kg Overall length: 5,963 mm x Overall width: 2,010 mm x Overall height: 2,660 mm Auxiliary headlights Tires: 225/55R16, front approx. 60%, rear approx. 30/40% Trailer hitch with ball head Double doors, 1/2 and 1/2, at the rear Gbodpfxsz R Ha Ij Aikow Side sliding door on the passenger side, damaged 6 pairs of lashing eyes in the cargo area Side walls lined with PVC up to a certain height Wooden floor Partition Central locking with remote control 1+2 seats 2 x electric windows, mirrors, heated mirrors Multi-function steering wheel Fully automatic transmission Air conditioning Radio/CD Rear-view camera with monitor Cruise control Storage compartment above Last repairs: Service on 06.06.2025: Maintenance service, water cooler GR, new coolant hose, new exhaust gas turbocharger Service on 23.09.2025: Maintenance service, fuel line, air conditioning refill, filter cover, turbocharger solenoid valve, stabilizer link + connecting rod rear axle, front brake calipers overhauled and front brake pads replaced, new Service on 24.02.2026: Maintenance service, particle filter regenerated, all injectors new, crankshaft pulley new, valve cover new Price: €6,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors and prior sale.

Condition: used, mileage: 625,000 km, first registration: 05/1971, fuel type: diesel, axle configuration: 2 axles, color: grey, gearing type: mechanical, Year of construction: 1971, Equipment: ABS, electronic stability program (ESP), SCANIA 110 SUPER WITH TURBOCHARGER THREE-WAY TIPPER – 2 UNITS AVAILABLE --- VEHICLE HISTORY: * Engine is dry and does not leak oil VEHICLE EQUIPMENT: * Three-way tipper * Manual transmission * Engine brake Gjdpotp Sabsfx Aikjbw * Turbocharger * PTO (power take-off) * Permissible total weight: 18,000 kg * Curb weight: * Payload: * Immediately operational --- * Export sales only with deposit (minimum €500 – €2,000) --- Export declaration/customs EXW possible within 10 minutes (authorized exporter) 5-day, 15-day, 30-day license plates and 15-day Austrian license plates available EURO 1 Technical data sheet (Dati Tecnici) Vehicle reservation requests exclusively via the email function Verbal reservations are not valid For sales to EU and non-EU countries, a deposit of at least €500 / €1,000 will be charged. Subject to change, errors, and prior sale! More vehicles can be found on our website. Sales are made exclusively according to our terms and conditions – see homepage. Important Note – Important Information: Despite careful inspection of all details in our offering, errors may occur. These may partially result from transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is for information purposes for contract initiation. The specifications provided here are without guarantee and do not constitute warranted characteristics.

Condition: used, Year of construction: 2013, operating hours: 9,710 h, One of the last models without a particulate filter: Liebherr L 542 Z 2plus1 Only used for light work on paved surfaces? No construction site! German machine! Machine delivered on January 15, 2013 – produced in 2012 – therefore still without a particulate filter! Excellent machine – technically and visually well-maintained – All services performed at Liebherr – last recorded on October 8, 2020 at 8678 hours Chassis No. VATZ0435TZB032052 Year of manufacture 2013 Operating hours approx. 9710 Liebherr 4-cylinder inline engine, water-cooled with turbocharger Emission level III, 142 hp with 6.9 liters displacement (Liebherr engine type 934) * BSS hub damper, driving vibration damper – vibration damping * 3rd hydraulic control circuit for tipping bucket, sweeper, grab bucket, etc. * Air conditioning * Central lubrication system – factory installed by Liebherr * Reversing warning device, audible (beeper) * Engine air intake via pre-filter TOP-AIR * Comfort driver's seat with pneumatic suspension * Steering wheel adjustable in inclination * 4 work lights on the front of the cab roof * 4 additional lights on the rear of the cab roof * 2 additional lights on the side of the cab roof * Protective grille for headlights at the front Gbedpfx Aiez Rh Rhskow * Radiator with coarse mesh for easier cleaning * Fluff filter in front of the radiator * Reversing fan to blow out the radiator (fan is reversible) * Pre-installation for rotating beacon, yellow light, on the top center of the cab * Battery disconnect switch * Radio pre-installation * Road approval Permissible total weight approx. 17,000 kg, unladen weight approx. 15,000 kg Hydrostatic drive with 3-speed transmission Tires 20.5 x 25 L3, front, 50% remaining, Michelin Tires 20.5 x 25 L3, rear, 40% remaining, Michelin Offer with permanently mounted bucket, 2.8 cubic meters, for the price of €43,900.00 net Optional equipment available at an additional cost: * Hydraulic quick coupler €3,550.00 including replacement of the permanently mounted bucket with a quick-coupler bucket * Tipping bucket from 3.0 cbm to 5.5 cbm from €4,950.00 * Bucket with undercarriage for quick coupler, 3.0 cubic meters from €3,660.00 * Volume bucket, 4 cubic meters, €4,500.00 * 4-in-1 bucket, 2 cubic meters, on request * Pallet forks, 5 or 8 tons, from €1,990.00 If required, also available with a used scale! Pfreundt WK 50 – €3,950.00 All prices net, export – domestic plus 19% VAT. Sale only to businesses or for export. Sale in the condition as it stands. No guarantee or warranty. The indicated mileage or operating hours are read from the mileage or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We will also gladly accept your vehicle in part exchange.