Surface Grinding Machine

CHEVALIER FSG-1640AF

Condition: new, Bernardo DG 32 Pro Drill Grinding Machine Specifications Drill diameter: 2 – 32 mm Point angle: 90° - 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of delivery • SBC diamond grinding wheel • ER 20 collets, 3 – 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, 20 pcs. (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • ER 20 or ER 40 collet chuck Features Dsdpegd H U Ujfx Aa Hjkt • Includes a setup for point grinding, i.e., improved centering of the drill tip on the workpiece and reduction of the required feed force • 30 ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes • Additional station for back-grinding the drill cutting edges (relief angle) • Universally adjustable point angle from 90° - 135° • Rotor with precision ball bearings ensures smooth running • Fast and precise working results due to simple operation • Vibration-free operation due to high inherent weight and rubber feet

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Dodpfjt Awm Dex Aa Hokt Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: good (used), Year of construction: 2004, IXION AUERBACH IA2 TLF-1200.4 Year of manufacture: 2004 Factory overhauled: 2023 CNC control: HEIDENHAIN 430M Travel X (table, longitudinal): 1,200 mm Travel Y (deep hole drilling-milling unit, vertical): 1,200 mm Travel Z (turret, horizontal): 700 mm Travel W (deep hole drilling-milling unit, horizontal): 1,200 mm A-axis (swivel of deep hole drilling-milling unit): +25°/-15° B-axis (NC rotary table): 360° NC rotary table with 5 T-slots: 1,000 x 1,000 mm Max. workpiece weight: 7,000 kg Rated drive power (S1 / S6): 12 / 18.5 kW Torque: 115 Nm Speed range: 60 - 6,000 rpm Max. drilling depth (in one pass): 1,200 mm (with 2 traveling steady rests) High-pressure coolant system for deep hole drilling oil: 100 bar & 42 l/min Tool changer for 24 tools With spindle air blast Max. tool length: 300 mm Max. tool weight: 3.5 kg Dkedpfx Aasydmuuo Hst Tool diameter Without adjacent free space: max. 90.0 mm With adjacent free space: max. 160.0 mm Equipment inside work area: - Fully enclosed working area with roof - Oil mist extraction - Chip conveyor Required floor space: 5,150 x 5,350 x 4,020 mm

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Item No. 13439 Technical data: - Polishing wheel / grinding wheel dimensions: approx. 300 x 40 x 76 mm - Grinding belt dimensions: approx. 3500 x 50 mm - Contact wheel dimensions: 400 x 50 mm - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Space requirement: approx. W 1100 x H 2450 x D 800 mm Djdpek D Ewgefx Aa Hjkt - Weight: approx. 300 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 4,605 h, functionality: fully functional, Controller: FANUC 31i-B5 Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Counter spindle: 5.000 rpm, 22 kW Dkjdpfx Aaozilups Het Spindle power: 22 / 18.5 kW (S1/S6)

Condition: as good as new (ex-display), Year of construction: 1988, machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 Dodpem E Tvhsfx Aa Hjkt STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm Dodpfsthuzpox Aa Hokt - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: good (used), Year of construction: 2002, Technical specifications Ø: 700 mm Rectangular: 800 x 700 mm Dsdpfsv Tzvhox Aa Hokt

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Technical Specifications: - Cutting range (round): 440 mm - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm - Transport height: 2700 mm All information subject to change – errors excepted Equipment & Features: - Coolant system 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Metal belt: - For transporting cut pieces, finished parts, and remnants Dodpfxexw T Ugo Aa Hjkt - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed * Djdpfx Aou N D Rqsa Hekt