Used Turbine for sale (364)

Condition: excellent (used), Year of construction: 2017, We offer a table shot blasting machine TZS 1 Manufacturer: KOVO Staněk Table diameter: 1,100 mm Year of manufacture: 2017 Fjdpfx Aowurhiod Nogi Weight: 2,500 kg Very good condition.

Condition: good (used), Year of construction: 2010, operating hours: 40,000 h, power: 1,000 kW (1,359.62 HP), input frequency: 50 Hz, input voltage: 400 V, complete Turboden 12 module Fodpowt Edbsfx Ad Negi

Year of construction: 2001, condition: good (used), 2 pieces axially split volute casing pumps with motor and base plate. Last application as turbine. !!! Map as pump and as turbine as pictures !!! Manufacturer: KSB Type: Omega 350-360 A Delivery rate: 1728 m³/h Delivery head: 32 m Speed: 1450 rpm Year of construction: 2001 For turbine operation Engine: VEM G21R 280 S4 Capacity: 75 kW at approx. 20 metres head and 1600m³/h Voltage: 400 V For pump operation: required shaft power: 177 kW required electric motor: 200 kW Fgjdpsd Nqi Rsfx Ad Nji NPSH Value: 6.9 Efficiency: 85.28%. maximum operating temperature: 140°C Speed sensor: Yes !! Price per piece !!

Condition: used, Year of construction: 1972, functionality: fully functional, pressure: 19 bar, power: 6,200 kW (8,429.64 HP), input frequency: 50 Hz, type of input current: AC, temperature: 320 °C, total height: 2,800 mm, rotational speed (max.): 7,100 rpm, total length: 4,500 mm, 1. Brněnská strojírna, Turbocharger set, condensing steam turbine of overpressure type 6,2MW Manufacturer: 1. Brněnská strojírna Power: 6200 kW Type: T6,2/6,2 RPM: 7100/ min Steam pressure: 19 bar Steam temperature: 320 ºC The equipment is from year 1972 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 2800 x 2800 x 4500mm Gearbox, compressor, condenser pumps, oil system and all related electro and InC equipment included. We will send all technical data on request. The machine has been regularly maintained and serviced since its commissioning. The period of GO and SO was about 5 years according to the actual condition. The repairs were carried out by the turbine manufacturer and the compressor manufacturer. On the basis of inspection and diagnostics in 2016, follow-up GO was carried out in 2016-17 at a total cost of ` 79.3 million. CZK Fgodpfx Adswqqkbs Nei

Year of construction: 1997, condition: used, Technical details: Rated capacity: 1100 kVA Revolution per minute: 1500 U/min type of fuel: Wasserstoff / Steam / Vapor max. temperature: 420 Grad weight: 3,9 t STEAM TURBINE other data: - Power: normal 560 kW and max. 820 kW - P1 64 bar - P2 11,5 bar - 1N = 1500 Ampere - Generator type DSG74-M1-4W; 400 V; - Generator nominal power: 1053 kVA / nominal effective power 820 kW Fgjdsu Nvbuepfx Ad Nji - Turbine is suitable for operation with exhaust steam temperature of approx. 405 °C. - A throughput of 2.8t live steam / h in continuous operation is only possible in load-free condition. Sale of the turbine as described and as is! The performance data given are manufacturer's data. These may vary due to age-related wear! We do not have and do not sell spare parts. For spare parts please contact the manufacturer: Dresser-Rand Siemens !!! i.D. *

Condition: good (used), Year of construction: 2018, operating hours: 27,240 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Year Built 2018; installed date 2020; starting for production Jan. 2021; working hours 27240H (just for reference); Fgjdpfxova Ih De Ad Noi power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC surface cooler & extractor; Sulter Dalian condensate pump; Condition installed; the technical information available upon request

Condition: used, Year of construction: 1968, functionality: fully functional, pressure: 19 bar, power: 6,200 kW (8,429.64 HP), input frequency: 50 Hz, type of input current: AC, temperature: 320 °C, total height: 2,800 mm, rotational speed (max.): 7,100 rpm, total length: 4,500 mm, 1. Brněnská strojírna, Turbocharger set, condensing steam turbine of overpressure type 6,2MW Manufacturer: 1. Brněnská strojírna Fgjdpowqqi Djfx Ad Nsi Power: 6200 kW Type: T6,2/6,2 RPM: 7100/ min Steam pressure: 19 bar Steam temperature: 320 ºC The equipment is from year 1968 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 2800 x 2800 x 4500mm Gearbox, compressor, condenser pumps, oil system and all related electro and InC equipment included. We will send all technical data on request. The machine has been regularly maintained and serviced since its commissioning. The period of GO and SO was about 5 years according to the actual condition. The repairs were carried out by the turbine manufacturer and the compressor manufacturer. On the basis of the inspection and diagnostics in 2020, a subsequent GO was carried out in 2021-22 with a total volume of CZK 84million.

Condition: good (used), Year of construction: 2018, operating hours: 13,993 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Year Built 2018; installed date 2020; starting for production Oct 2020; production stop Jul 2022; working hours 13993H; power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC extractor, Sulter Dalian Condensate Pump; Condition dismantled by OEM; the technical information available on request Fgsdsva Ifvspfx Ad Nei

Condition: used, Year of construction: 1997, functionality: fully functional, pressure: 19 bar, power: 25,000 kW (33,990.50 HP), input frequency: 50 Hz, temperature: 320 °C, overall weight: 90,000 kg, rotational speed (max.): 3,000 rpm, total length: 6,200 mm, type of cooling: water, ŠKODA Plzeň, Turbogenerator set, steam turbine 25MW Power: 25 000 kW RPM: 3000 / min Steam pressure: 19 bar Steam temperature: 320 ºC Number of extractions: 1 The equipment is from year 1997 and has received all maintenance required for the maximum reliability, availability and capacity. Fgodpfx Aswqqg Aod Nei Size: 4700x4700x6200mm Weight: 90 000 kg Generator, gearbox, condenser, condensate pumps, oil system and all related electro and InC equipment included. We will send all technical data on request.

Condition: used, Year of construction: 1999, functionality: fully functional, pressure: 90 bar, power: 25,000 kW (33,990.50 HP), input frequency: 50 Hz, type of input current: AC, temperature: 515 °C, overall weight: 34,000 kg, total length: 4,500 mm, ABB, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: ABB Power: 25 000 kW Type: G 36A RPM: 7 547 / min Steam pressure: 90 bar Output steam pressure: 18 bar Steam temperature: 515 ºC The equipment is from year 1999 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 2 100 x 2 100 x 4 500 mm Fgjdpfxewqqckj Ad Nsi Weight: 34 000 kg Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request.

Condition: used, Year of construction: 1958, functionality: fully functional, power: 17,500 kW (23,793.35 HP), input frequency: 50 Hz, temperature: 320 °C, overall weight: 30,000 kg, rotational speed (max.): 3,000 rpm, total length: 7,000 mm, ČKD, Turbogenerator set, condensate steam turbine 17,5MW Manufacturer: ČKD Power: 17 500 kW Type: RPM: 3000/ min Steam pressure: 19 bar Output steam pressure: 18 bar Steam temperature: 320 ºC Fedpfxswqqa Nj Ad Nogi The equipment is from year 1958 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3500 x 3500x7000mm, Weight: Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request. The machine has been regularly maintained and serviced since its commissioning. The period of GO and SO was carried out according to the actual condition. The repairs were carried out by the turbine manufacturer, the reconstruction (1969) and subsequent repairs were carried out by the 1st Brno Engineering Works. GO with replacement of blades was carried out in 1986 and SO in 2005 with standard scope of work. In the last period, routine maintenance and repairs were carried out by the local maintenance of the heating plant, when the following repairs were mainly carried out: - control maintenance, oil. system, condensation - maintenance of the heat exchanger station - maintenance of valves

Condition: used, Year of construction: 1995, operating hours: 201,000 h, functionality: fully functional, pressure: 19 bar, power: 25,000 kW (33,990.50 HP), input frequency: 50 Hz, temperature: 320 °C, overall weight: 93,000 kg, rotational speed (max.): 3,000 rpm, total length: 6,200 mm, type of cooling: water, Škoda Plzeň, Turbogenerator set, condensate steam turbine 25 MW Manufacturer: Škoda Plzeň Power: 25 000 kW Type: RPM: 3000/ min Steam pressure: 19 bar Steam temperature: 320 ºC Number of Extractions:1+3 Fgsdpfx Aowqp U Eed Nsi Operation hours: 201000 The equipment is from year 1995 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 4 700 x 6 200 mm, Weight: 93 000 Generator, gearbox, condenser, condenser pumps, oil system and all related electro and InC equipment included. We will send all technical data on request. The machine has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. GO was carried out by the turbine manufacturer. The last GO was carried out in 2017 for a total amount of 112.6 million CZK. The following repairs were carried out: - replacement of the old rotor with a new one, - repair of the flow section of the stator and the distributor wheels and supports, - replacement of the gearbox, - repair of the regulation, oil. Repair of the system, condensation, - installation of irrigation and new NZ, Maintenance and servicing was carried out in the years after the GO, the inspection for subsequent repair was planned for 2024 and did not take place.

Condition: used, Year of construction: 1985, functionality: fully functional, pressure: 90 bar, power: 25,000 kW (33,990.50 HP), input frequency: 50 Hz, temperature: 515 °C, overall weight: 34,000 kg, rotational speed (max.): 3,000 rpm, 1. Brněnská strojírna, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: 1. Brněnská strojírna Power: 25 000 kW Type: R25-9/1,9 RPM: 3000 / min Steam pressure: 90 bar Output steam pressure: 18 bar Steam temperature: 515 ºC The equipment is from year 1985 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3 000 x 3 000 x 5 100 mm Fjdpfxswqp Ede Ad Negi Weight: 34 000 kg Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request. Maintenece: The TG2 has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. The O&M was carried out by the turbine manufacturer or a specialist company in the field. The last O&M was carried out in 2010-2011 for a total amount of 47.3 million EUR. The following repairs were carried out: - repair of the rotor with new blading - repair of the stator flow section with new blading - Replacement of quick-stop and control valve blocks - repair of the control - oil revision. system, repair of pumps - revision of steam system, valves, drainage, replacement of steam hinges The last repair (SO) was carried out in 2022-2023 for a total amount of 22 mil. The following repairs were carried out: - inspection of the flow section of the turbine, cleaning, replacement of seals, balancing of the rotor - oil revision and cleaning. system, revision of oil pumps, new radiator tubes - revision and repair of the turbine control and the control safety system - inspection of steam pipes and valves Regular maintenance and servicing was carried out during operation.

Condition: used, Year of construction: 1994, functionality: fully functional, pressure: 90 bar, power: 25 kW (33.99 HP), input frequency: 50 Hz, type of input current: AC, temperature: 515 °C, overall weight: 34,000 kg, total height: 5,000 mm, rotational speed (max.): 3,000 rpm, type of cooling: water, 1. Brněnská strojírna, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: 1. Brněnská strojírna Power: 25 000 kW Type: R25-B1 RPM: 3000 / min Fgsdpfswqqd Uex Ad Nei Steam pressure: 90 bar Output steam pressure: 18 bar Steam temperature: 515 ºC Number of extractions: 1 The equipment is from year 1994 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3 000 x 3 000 x 5 100 mm Transformator: DTK 25; 25 kVA; 6000/400 V; 2,41 A/36,1 A; Ua = 3,7%; Yz1; IP00; v.č. 1051031 Weight: 34 000 kg Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request.

Condition: used, Year of construction: 1985, functionality: fully functional, pressure: 90 bar, power: 25 kW (33.99 HP), input frequency: 50 Hz, type of input current: AC, temperature: 515 °C, overall weight: 45,000 kg, total height: 5,000 mm, rotational speed (max.): 3,000 rpm, type of cooling: water, 1. Brněnská strojírna, Turbogenerator set, back pressure steam turbine 25MW Manufacturer: 1. Brněnská strojírna Power: 25 000 kW Type: R25-9/1,9 RPM: 3000 / min Fgedpfx Adowqp Acj Noi Steam pressure: 90 bar Output steam pressure: 18 bar Steam temperature: 515 ºC The equipment is from year 1985 and has received all maintenance required for the maximum reliability, availability and capacity. Size: 3 000 x 3 000 x 5 100 mm Weight: 45 000 kg Generator, gearbox, oil system and all related electro and InC equipment included. We will send all technical data on request. Maintenece: The machine has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. The O&M was carried out by the turbine manufacturer or a specialist company in the field. The last O&M was carried out in 2007 for a total amount of 44.2 million EUR. The following repairs were carried out: - repair of the rotor with new blading - repair of the stator flow section with new blading - Replacement of quick-action and control valve blocks - replacement of the control gear on the machine, - reconstruction of the control system - repair of oil. system, - revision of steam system, valves, drainage The last repair (SO) was carried out in 2020 for a total amount of 16.2 million CZK. The following repairs were carried out: - revision of the flow section of the turbine, cleaning, replacement of seals, rotor balancing - oil revision and cleaning. Revision of the rotor, cleaning of the rotor, revision of the rotor system, installation of full flow filtration - complete repair of the KUP with repiping, - revision and repair of the turbine control and the control safety system - inspection of steam pipelines and valves Regular maintenance and servicing was carried out during operation, with further periodic repairs planned for 2027.

Condition: good (used), Year of construction: 2008, functionality: fully functional, power: 2 kW (2.72 HP), Sales: SGT Strahlmaschinen AG, Switzerland; Turbine type: 2 x TC 260 D; 2 x 4 kW Fgedewbhkaepfx Ad Nei

Condition: used, Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Fgodpfx Adjxpiw Uj Nei Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: ready for operation (used), We offer 4 pieces of reconditioned Schlick turbines, 320 mm, including 7.5kW motors. Fgedpfxjvphf Us Ad Noi The price listed is for 4 pieces complete. Price for 1 piece - 3000 Eur.

Year of construction: 2005, condition: used, Vacuum cleaner motor, suction turbine, wet vacuum cleaner, suction motor -Manufacturer: Ell, suction motor from scrubbing machine Gansow 70 BF 70 Fgedpfx Adsk D Nt Is Nji -Type: 500W -Voltage: 24V -Number: 1x available -Price per piece -Dimensions: Ø 147/H210 mm -Weight: 2.8 kg/pc.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 27324-1/1, input voltage: 400 V, Shot Blasting Machine Parts Three new Gostol tst turbines for shot blasting machines/surface treatment of metal elements. Fgodpfx Adjwrp Nfo Noi

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 30547, spindle speed (max.): 160,000 rpm, table width: 350 mm, table length: 700 mm, overall weight: 3,000 kg, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By placing a bid, you commit to timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Spindle speed Turbine T10: 75 / 100,000 rpm Spindle speed Turbine T16: 120,000 – 160,000 rpm Table dimensions: approx. 700 x 350 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection: 6 kW Fodpfx Aoxnl Imjd Njgi Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,900 mm Weight: 3,000 kg EQUIPMENT 3 different high-frequency grinding heads (various speeds) Two-axis digital display by VISULESTA With 4 T-slots

Condition: used, Used Sinclair Stainless Fabrications approximately 15,000 litre 316 stainless steel vertical reactor. Unit measures approximately 2,300mm diameter x 3,540mm straight side. Has welded dished top and bottom heads. Internal rated 3.6 bar/full vacuum design pressure at 165 deg.c. Has external stainless steel limpet coil jacket rated 5.5 bar design pressure at 165 deg.c. Unit has top mounted stainless steel agitator with 2-tier 4-blade turbine blades. Driven by 45kw motor/gearbox with double mechanical seal. Specifications: Fjdpfjxt H Eqox Ad Nogi Capacity: 15,000 L Diameter: 2,300 mm Straight Side: 3,540 mm Material of construction: 316 stainless steel Type Of Heads: welded dished Internal Pressure: 3.6 bar Jacket Pressure: 5.5 bar Internal Temperature: 165°C Type of stainless: 316 Dimensions: 2300mm diameter x 3540mm straight side

Year of construction: 2008, condition: excellent (used), Used fully serviced and well maintained Bystronic Byspeed 3015 cnc laser cutting machine for sale Byspeed 3015 5.2kw – serviced every 6months with Bystronic under service contract Installed new/year: 2008 Manufacturer: Bystronic Model: Byspeed 3015 Sheet size: 3metre x 1.5metre / 3000mm x 1500mm Laser power: 5.2kw / 5200 watt Automation with Bytrans 3015 for “lights out production” automatic sheet load and unloader Year: 2008 Condition: good working condition Most recent information: Full refurbishment on the resonator 18 months ago carried out by Bystronic uk, which consists of: New turbo 2016 / turbine and glassware New vacuum pump fitted (2022) Delivery, installation and training available Fgsdpfx Aop Eb R Usd Nei

Condition: excellent (used), mileage: 112,871 km, power: 324 kW (440.52 HP), first registration: 01/2011, fuel type: diesel, color: white, axle configuration: 10x4, fuel: diesel, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, cruise control, parking heater, soot filter, spoiler, = More options and accessories = - Aluminium fuel tank - Brake booster - Roof spoiler - Electric windows - Electrically adjustable exterior mirrors - Speed limiter - Refrigerator - Alloy wheels - Air suspension - Fog lights - Particle filter - Reversing camera - Sleeping cabin - Sunshade - Stability control - Auxiliary heating - Toolbox - Power take-off (PTO) - Central lubrication - Central locking = More information = Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle; Steered Fuel tank: 500 liters Brand of body: RSP ESE 40/10-DV-K Technical condition: very good Visual condition: very good MAN TGS 35.440 10X4 TRIDEM RSP SUCTION EXCAVATOR EURO 5 L PACKAGE 440 HP DRIVE 10X4 TRIDEM LAST AXLE LIFT AND STEERING WHEELBASE 450 CM AIR SUSPENSION SLEEPING CABIN WITH AIR CONDITIONING COOLING TANK CAMERA SYSTEM DIFF LOCK MANUAL GEARBOX RSP SUCTION EXCAVATOR TYPE: ESE 40/10-DV-K 2 TURBINES POWER BOOM CENTRAL LUBRICATION 5X RADIO REMOTE CONTROL EXTRA HIGH PRESSURE PUMPS HOSES AND GUN EXTRA AIR VALVES AT THE BACK OF THE TRUCK TO USE AIR TOOLS LIKE A HAMMER EXTRA HYDRAULIC CONNECTION AT THE FRONT OF THE TRUCK COMPRESSOR 4843 HOURS FAN 2919 HOURS ALL AVAILABLE MANUALS Fgjdpfeuxp Slsx Ad Nsi FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: used, Used MOLTENI dissolver Fgedpfx Adoxrb Iqe Nei 15 kw - Hp 20 - 3x 380 volts Turbine Ø 300 mm