Used Turbine for sale (336)

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. Itsdpfx Aoyhc Irsa Ieh - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: excellent (used), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Interior: Stainless steel, all-around heating External dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Regulator: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable Iodpjyzzm Isfx Aa Ioth ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side with 2 feed-throughs approx. 12 cm diameter each Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data, information is non-binding!) If you have any further questions, we are happy to assist you by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original datasheets or obtaining information directly from the manufacturer.

Condition: excellent (used), For sale: professional pneumatic turbine GTV 1000 from the renowned brand Mannesmann Demag – original, fully functional, and in excellent condition. - Technical specifications: Isdpjw Rd I Eefx Aa Isth • Rotational speed: 100,000 rpm • Power supply: compressed air (approx. 6 bar) • Air consumption: approx. 318 l/min • Spindle diameter: 30 mm • Total length: approx. 120 mm • Weight: only 210 g • Collet: 3 mm • Oil-free version – clean operation without lubrication - Why choose this? • Extremely lightweight and compact – ideal for continuous operation • German quality – precise bearings, no vibration • Perfect for deburring, micro-milling, and robotics applications • Oil-free – cleaner operation and reduced material wear

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2007772, BCM manual glass cutting machine for fast cutting of float glass sheets in semi-jumbo sizes. Glass handling on air cushion using a turbine. Tilting table surface. Simple cutting with the help of two side bars! The machine has been fully inspected, cleaned, and is available for viewing at our site in perfect working condition! Ijdpfx Aey Aw Nnsa Ieth

Condition: new, Year of construction: 2022, functionality: fully functional, Item: A-Aalborg-Micro Isdjqy Nv Rspfx Aa Ieth AALBORG MICRO The Aalborg Micro is a compact exhaust gas heat exchanger/steam generator, designed for waste heat recovery from gas/MDO/HFO engines and gas turbines. As a heat exchanger, the Aalborg Micro offers a wide range of opportunities, due to the fact that hot water, TEG and TFO can all be used as media. Furthermore the Aalborg Micro can be used as a steam generator. A cylindrical unit in the center with an integrated regulation damper allows up to 80% of the exhaust gas to bypass the heating surface. The heating surface can be cleaned easily via optional soot blower rings using compressed air/steam/water, and/or by a pyrolysis process in dry-run mode

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) • Serial number: 510445 Ijdpoy D Hp Tjfx Aa Ieth • Apparent power: 60 MVA • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Condition: reconditioned (used), operating hours: 735 h, functionality: fully functional, empty load weight: 784 kg, Equipment: second-hand vehicle warranty, HAKO JONAS 1200 D SWEEPER This machine has been fully serviced with only 735 hours on the clock. A new cylindrical brush, combined with new side brushes with added wire, ensures excellent sweeping results. The sweeper is equipped with road lighting. A reliable and very fuel-efficient LDW502 diesel engine. A new 12V 50Ah starter battery. A high-performance dust extraction turbine and new dust guards around the main brush prevent fine dust and dirt from being raised after sweeping. The machine has a large debris flap for collecting larger debris. The machine has undergone a thorough overhaul. Operating fluids and parts such as bearings, drive belts, and dust guards have been replaced. Each machine we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: JONAS 1200 D Drive: LDW502 diesel engine Theoretical capacity (m²/h): 13,200 Sweeping width (mm): 800 Sweeping width with side brushes (mm): 1470 Hopper capacity (l): 130 Sweeping speed (km/h): 9 Dimensions (L x W x H) 1998 mm x 1142 mm x 1520 mm Machine weight (ready to use) ~ 784 kg INCLUDED: NEW cylindrical brush - PPL bristles NEW side brush - PPL bristles + ACC (wire) (2x) NEW main air filter NEW roller guards NEW 12V 50Ah starter battery Full engine filter and oil service Road lighting Hydraulically lifted 130L waste container Itedpfjzdq Uksx Aa Ish KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned The Jonas 1200 D sweeper is the perfect machine for efficient and economical sweeping of multi-story parking lots, warehouses, production buildings, and outdoor areas Combustion engine power ensures high flexibility Large working width (1470mm) ensures high area coverage Highly legible and intuitive control panel

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 140 L Max. batch weight: 300 kg Max. component weight: 10 kg Compartment diameter: 700 mm Isdpfx Aaszbrfte Isth Compartment width: 850 mm Nr. Of turbines: 1 Power of turbine: 4 kW Max. turbine flow: 56 kg/min Cleaner type: air Foundation: no Housing protection: Mn + rubber Filtering unit: YES Max. installed power: app. 12 kW !!! NEW Rubber bel installed !!!

Condition: good (used), Hook type shotblasting machine 1800x2500 with motorised hook with crane SIRSI Type: Hook type Max. diameter of workpiece: 1800 mm Max. height of workpiece: 2500 mm Max. workpiece weight: 3.000 kg Machine hoist capacity: 1x 3.000 Kg Nr. Of turbines: 3 Turbine type: 360 Turbine wheel diameter: 360 Power of turbine: 3x 7,5kW Max. turbine flow: Type of transport rail: I Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Total width of machine: Isdpfx Aewrxczja Isth Total height of machine: Total length of machine:

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm Isdpfsu Nu Nkex Aa Ijth -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: ready for operation (used), Year of construction: 2001, operating hours: 65,000 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, CO2 laser cutting machine manufactured in 2001. This TRUMPF Trumatic L3030 features a laser power of up to 3208 W in CW mode, providing efficient cutting capabilities. It operates on a 3-phase AC supply. If you are looking to get high-quality cutting capabilities, consider the TRUMPF Trumatic L3030 machine we have for sale. Contact us for further details. • Electrical • Supply voltage: 400 V • Phases: 3-phase AC • Frequency: 50 Hz • Rated power: 73 kVA • Rated current: 105 A • Maximum fuse protection: 125 A • Control voltage: 24 V DC • Control • Control system: Siemens Sinumerik 840D (CNC) with TRUMPF TASC3 laser control • Control software version: 2.4 • Laser performance • CW mode power: • 100%: 3208 W • 85%: 2756 W • 75%: 2407 W • Pulsed (5 kHz) power: • 100%: 3208 W • 75%: 2416 W • 50%: 1610 W • 25%: 810 W • 10%: 328 W Isdjyzymgopfx Aa Isth • 5%: 157 W • 1%: 0 W • RF/drive • Reflected RF power: 0.3 kW • Maximum CW RF amplitude: 100% • Switching frequency (CW): 50 kHz • Maximum pulse voltage: 10,000 V • Pressure and leakage • Operating pressure limits: 20.01–27.00 kPa • Maximum turbine pressure: 200 hPa • Leakage rate: 0.04 hPa/min • Thermal/CPU • Maximum CPU temperature: 49 °C • Actual CPU temperature: 43 °C • Optics/Alignment • Maximum beam alignment time: 600 s • Hours • Laser on hours: 65,000 h Additional equipment • RIEDEL chiller (cooling system) (2001), Type: L 15/21 TR3 • Supply voltage: 400 V • Phases: 3-phase • Frequency: 50 Hz • Nominal current: 42 A • Protection class: IP54 • Refrigerant: R134a • Refrigerant charge: 11.5 kg • Maximum water pressure: 20.2 bar

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 250 L Max. batch weight: 300 kg Max. component weight: 10 kg Compartment diameter: 900 mm Compartment width: 930 mm Nr. Of turbines: 1 Power of turbine: 7,5 kW Itedjza Eq Tepfx Aa Ieh Max. turbine flow: 105 kg/min Cleaner type: air Foundation: no Housing protection: Mn + rubber Filtering unit: YES 2.000 m3/h Max. installed power: app. 15 kW

Condition: reconditioned (used), Year of construction: 2019, operating hours: 515 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CL H TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Itjdjzcyb Sspfx Aa Ieh Manufactured in 2019 with 515 hours of operation 510mm cleaning head (TB510) equipped with a new medium-hard disc brush for use on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 290 h, functionality: fully functional, working width: 430 mm, area performance: 1,700 m²/h, overall weight: 179 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO SCRUBMASTER B30 TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2019 with 290 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. Iedpfx Aezcxk Soa Ieth New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's contour. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1700 Tank capacity (l): 30/30 Machine weight, ready to use (kg): ~179 Power output (kW): 1.13 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 458 h, functionality: fully functional, working width: 430 mm, area performance: 1,900 m²/h, overall weight: 190 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO SCRUBMASTER B30 CL TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2019 with 452 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. Itodpezcwpasfx Aa Ieh New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Squeegee working width (mm): 760 Theoretical capacity (m²): 1900 Working speed (km/h): 4.5 Tank capacity (l): 30/30 Weight (ready to use): ~190 Power (kW): 1.31 INCLUDED: NEW BATTERIES 12V 85Ah SIAP GEL BATTERY (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: used, Year of construction: 2002, 1. Shot blasting machine CARLO BANFI SCM4R/12X18.5/X1/10 Serial number: 4965 Year of manufacture: 2002 Technical specifications: Dimensions of the fixture (cluster): 1200 × 18050 mm Maximum weight of a single fixture: 500 kg 4 turbines, model X1 Turbine diameter: 300 mm Rotational speed: 2900 rpm 1 self-cleaning bag filter P.J.60/B/S.R. Starting price: 20,000 EUR 2. Shot blasting machine CARLO BANFI SCM3R/F.500/12X18.5/X1 Serial number: 4223 Year of manufacture: 1994 Technical specifications: Dimensions of the fixture (cluster): 1200 × 18050 mm Maximum weight of a single fixture: 500 kg 3 turbines, model X1 Turbine diameter: 300 mm Rotational speed: 2900 rpm 1 self-cleaning bag filter P.J.60/B/S.R. Starting price: 15,000 EUR 3. Two-track overhead conveyor FUTURA type DR44 Serial number: 045/2002 Year of manufacture: 2002 Technical specifications: 2 caterpillar-type drive units Total track length: 150 m Itsdpszaizvefx Aa Ish Adjustable speed: 3.4–8 m/min Allowable load per hook: 300 kg Number of hooks: 33 Starting price: 50,000 EUR. The line is located at the parent company in Italy, near Pordenone. Direct contact is possible after prior arrangement.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 628 h, functionality: fully functional, working width: 430 mm, area performance: 1,900 m²/h, overall weight: 190 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO SCRUBMASTER B30 CL TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2017 with 628 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Squeegee working width (mm): 760 Theoretical capacity (m²): 1900 Working speed (km/h): 4.5 Tank capacity (l): 30/30 Weight (ready to use): ~190 Power (kW): 1.31 INCLUDED: NEW BATTERIES 12V 85Ah SIAP GEL BATTERY (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE Itsdpozcvl Tsfx Aa Ioh KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: excellent (used), mileage: 204,000 km, power: 324 kW (440.52 HP), first registration: 03/2009, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro4, suspension: steel, number of seats: 2, total length: 9,600 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Leaf suspension - Power brake booster - Refrigerator - Radio/CD player - Rotating beacon - Reversing camera - Hose sets - Sun visor - Toolbox - Central lubrication - Towing hitch = Remarks = 6x6 Leaf suspension ZF 16-speed manual transmission RSP ESE 26/8-DV-K suction excavator 8 m³ 2 turbines 2x radio remote control Hydrostatic drive (suction + driving + steering) Inspection valid until 05.03.2027 In very good condition! Dutch vehicle Immediately operational = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Transmission Transmission: ZF, 16-speed, manual Axle configuration Suspension: leaf suspension Max. front axle load: 9,000 kg Rear axle 1: Max. axle load: 9,500 kg Rear axle 2: Max. axle load: 9,500 kg Weights Unladen weight: 23,520 kg Payload: 4,480 kg Gross vehicle weight: 28,000 kg Functional Body make: RSP ESE 26/8-DV-K Maintenance, History and Condition APK (MOT/TUV): inspected until 03/2027 Itjdpfxoy Dh Rfs Aa Ijh Technical condition: very good Visual condition: very good Identification License plate: BV-VF-88

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1,408 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2013 with 1408 hours of operation 510mm cleaning head (TB510) equipped with a new medium-hard disc brush for use on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Itjdpszcngvsfx Aa Ieh Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 55 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, NEW !!!industrial axial fan 910mm diam 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 /ct2311/ 3PCS IN STOCK Diameter 910mm 400V 29000m³/h 680/520 rpm manufacturer : Ziehl-Abegg FC0910-ADS.7M.V7 Power supply: 400V RoHS compliance: Yes Diameter (propeller or turbine): 910mm Flow rate (m³/h): 29000 Iedpfjxx U Tgox Aa Ieth Air pressure: 70-140pa Frequency: 50/60Hz Protection rating: IP.54 Current consumption (amperes): 3.6/2.3 Bearing mounted Curved aluminum blades 7pcs "replaceable" Noise level (decibel): 83 Power consumption (watts): 1250W/660W Airflow direction: Propeller towards the mounting points Air temperature range: -25°C to +60°C Connection type: Terminal box Speed ​​(rpm): 680/520 Weight: 55kg Overall dimensions: B1 = 337mm B2 = 20mm, D1 = 1005mm, D3 = 102

Condition: new, Year of construction: 2023, functionality: fully functional, rotational speed (min.): 870 rpm, volume flow: 23,500 m³/h, type of input current: three-phase, overall weight: 23 kg, inlet: 800 mm, pressing: 180 Pa, input voltage: 380 V, power: 1.1 kW (1.50 HP), bolt circle diameter: 800 mm, input frequency: 50 Hz, NEW! Industrial Axial Fan 800mm dia. 23500m3/h 180pa Ziehl-Abegg FC080-SDS.6K.V7 VT0121 5pcs in stock Brand: Ziehl Abegg Type: FC080-SDS.6K.V7 Year of manufacture: 2023 - Flow rate (m³/h): 23,500 - Air pressure 170Pa max The range of applications of this Ziehl-Abegg spiral fan is very wide: air extraction, drying, air recirculation, air supply. 3-phase 2-speed motor 1030W/400W, 870/630rpm 400VAC (±10%) Δ/Y 50Hz, 1.65/1.05A, , IP54 - - Frequency: 50/60 Hz - Power supply: 400 V 50Hz IP54 - Connection type: terminal box - Diameter (impeller or turbine): 800 mm - Degree of protection: IP54 - Air flow direction: impeller towards mounting brackets - Air temperature range: -25°C to +55°C - Speed ​​(RPM): 890/650 - Current (A): 2.7/1.6 - 7-blade impeller made of galvanized sheet steel - Electrical connection via terminal box - Ball bearings Itedpfx Ajyfv Igoa Ieh - Overload protection protection via thermostat - Airflow direction: impeller towards mounting bracket - ​​Class F - RoHS compliance: Yes - Mounted: on bearings - Dimensions: 850x850x220 mm - Weight: 23kg

Condition: excellent (used), Year of construction: 2017, type of input current: DC, KEMPER Dusty welding smoke extractor + 10 meter suction pipe + exhaust welding gun Holch 350-SC. 3.5 meters Kemper Dusty welding fume hood Suction power - 260 m³/h suction pipe: 10 meters Holch 350-sc 3.5m suction welding gun Filter mode - Cleanable filter Filter cleaning method - Manual Filter surface - approx. 1.35 m² Motor power - 1.6 kW Power supply - 1 x 230 V / 50 Hz Filter type - Filter cartridge Filter material - ePTFE membrane Filter efficiency - > 99.9 % Dust classification - M Basic data Dimensions (W x H x H) - 300 x 300 x 690 mm Weight - 24 kg Rated current - 8.7 A Iodpfemxklhsx Aa Ioth Noise level - 74 dB(A) Further information Fan type - Suction turbine Hose connection - ~45 mm x 2

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, product length (max.): 1,400 mm, product width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of blast turbines: 4 Power per blast turbine: 22 kW Abrasive throughput per turbine: 7 kg/hour Shot flow rate: 450 kg/min Blast velocity: 80 m/s Maximum product dimension: 1,400 x 1,000 mm Cabin diameter: 2,200 mm MACHINE DETAILS Control system: Siemens EQUIPMENT Vibratory screen for abrasive media and discharged material Itedoyua D Repfx Aa Ioh Feed via external rail system CE marking

Condition: reconditioned (used), Year of construction: 2021, operating hours: 805 h, functionality: fully functional, fuel type: electric, empty load weight: 600 kg, Equipment: second-hand vehicle warranty, HAKO SWEEPMASTER B980 R SWEEPER NEW 6V 250AH GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 30A BATTERY CHARGER NEW AIR FILTER Manufactured in 2021 with only 805 hours on the clock. A new, antistatic cylindrical brush combined with new, antistatic side brushes with mixed bristles provide excellent sweeping results. The sweeper is equipped with work lights and a warning light. A high-efficiency dust extraction turbine and new dust guards around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large debris flap for collecting larger debris. The machine has undergone a thorough overhaul. Operating fluids and parts such as bearings, drive belts, and dust guards have been replaced. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: Sweepmaster B980 R Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7200 Sweeping speed (km/h): 6 Tank capacity (l): 60 (2x30) Filter area (m²): 3 Dimensions (L x W x H) 1500 mm x 1200 mm x 1330 mm Machine weight, ready to use (kg): ~600 INCLUDED: NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 30A BATTERY NEW AIR FILTER NEW antistatic cylindrical brush - MIX bristles NEW antistatic side brushes - MIX bristles (2x) NEW roller guards Work lights Warning light Dust bins (2x 30L) KEY FEATURES: The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The Sweepmaster B980 R sweeper is the perfect machine for efficient, economical sweeping of multi-story parking lots, warehouses, production buildings, and outdoor spaces. The battery power provides high flexibility, allowing operation even in confined spaces, buildings, and warehouses. The large working width (1200mm) ensures high surface coverage. The control panel is very clear and intuitive to use. Itodpfx Aozcavija Ijh

Condition: reconditioned (used), Year of construction: 2016, operating hours: 830 h, functionality: fully functional, working width: 650 mm, area performance: 3,500 m²/h, overall weight: 447 kg, warranty duration: 12 months, water tank capacity: 75 l, HAKO SCRUBMASTER B75 R TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2016 with 830 hours of operation 650mm cleaning head (TB650) equipped with new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A new rubber guard around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction nozzle working width (mm): 860 Working speed (km/h): 5.5 Tank capacity (l): 75/75 Number of brushes (pcs): 2 Brush speed (rpm): 180 Efficiency (m²/h): 3500 Gradeability (%): 10 Weight (kg): 447 W INCLUDED IN THE KIT: NEW 6V 175Ah SIAP GEL BATTERIES (4x) Iodpfx Aaszb I Nbj Isth NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (2x) NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.