Carpet cleaning machine, carpet cleaner, cleaning machine, spray extraction device
Qv9iva9x
-Working width: 300 mm
-Fresh water tank
-Dirt water tank
-Connection: 220 V
-Power: 1.3 kW
-Dimensions: 320/500/H950 mm
-Weight: 26 kg
More technical data on request
Betdvekelo
CONDITION:
- fully functional
Mccygzp
- very clean
- as good as new
SERVICE:
- incl. 6 months warranty
- incl. delivery
- at pick up incl. briefing and demonstration
TECHNICAL DATE:
-area capacity (basic cleaning/intermediate cleaning iCapsol) (m²/h) 350 / 1000
- Air volume 45
- Vacuum (mbar/kPa) 300 / 30
- Spray pressure intermediate cleaning (bar) 3,5
- Spray pressure basic cleaning (bar) 7
- Spray quantity intermediate cleaning (l/min) 0,7
- Spray quantity basic cleaning (l/min) 3,2
- Working...
Baking tray cleaning machine KD Plaster for 80cm wide trays
Sswnvdgp
-for sheets 58cm to 80cm
-baking trays 2 edge Margins on the short side
-400 volts
The sheet metal cleaning machine, with 4 rollers, is in good condition and is completely overhauled.
On request with sheets 78 cm x 58 cm.
Be3llvpkxv
We sell a used Admiral 8 carpet cleaning machine from our inventory.
I0qv9wlvq
Carpet cleaning machine, carpet cleaner, cleaning machine, spray extraction device
-Working width: 400 mm
-Fresh water tank
Ccreguay
-Dirt water tank
-Connection 220 V
-Dimensions: 1000/420/H880 mm
-Weight: 70 kg
More technical data on request
Betdu0y8xn
Rental prices:
- Day: 100 Euro
- Week: 400 Euro
- Month: On request
Suitable transport vehicle necessary. Delivery and collection with on-site instruction is possible for an additional charge. Cleaning agent is also available from us.
TECHNICAL DATA:
- Area performance (basic cleaning/intermediate cleaning iCapsol) (m²/h) 350 / 1000
- Air volume 45
- Vacuum (mbar/kPa) 300 / 30
- Intermediate cleaning spray pressure (bar) 3.5
- Spray pressure basic cleaning (bar) 7
- Spray volume intermediate cle...
Baking tray cleaning machine KD Putz 100er trays
Bo82b99380
-suitable for sheets 98cm 2 edge
-baking trays 58x98cm
-with mobile underframe
-with lubrication
-400 volts
INTERSONIK MINISONIK series provides fast, reliable and economic solution in parts washing!
Perfect parts washing systems for degreasing and precise cleaning
Operation Principles:
Besohmis9r
High frequency (25 kHz) which is obtained in liquid, creates millions
of microscobic air bubbles loaded with vacuum energy, strike to
dirty surfaces and explode and so oil, chip, carbon, lime, blood
tissue are removed.
Minisonik ultrasoniks washer are available in 4 different size, 4l , 12l , 18l and 28 l...
Operational hours: ca. 7500h.
Beq2waloz8
Baking tray cleaning machine Ullmann tray cleaning machine
-for sheet 60x40cm edges on the short side
Bo3ecyk989
-for sheets 58x78cm edges on the long side
-400 volts
Sheet metal cleaning machine Jeros 5010 828
Cufiiwl7c
-built in 1989
-380 volts
-for sheets 58x78cm edges on the short side
sheet metal cleaning machine offered by Schlee. The machine is year of construction 2011 and is suitable for sheets up to 58 cm wide.
Schlee sheet metal cleaning machine
Type: Uni-58
Year of manufacture 2011
for sheets up to 58 cm wide
cleans / brushes
lubricated
mobile on castors with brakes
Stainless steel version
Further details on request.
Qo9yvpoj
Dimensions:
height: approx. 115 cm
width: approx. 150 cm
depth: approx. 89 cm
Derryglan Ltd - Continuous Vertical Bag Sealer with Ink Printer Coder & Infeed Loader
• Horizontal floor standing continuous sealer
• Ideal machine for sealing bags on conveyor
Bt0e9nvixd
• Ink Printer / Coder, prints 2 lines up to 15 characters per line.
• Infeed loader
• Heavy Duty bag sealer for large pre-made bags.
• Adjustable conveyor table height 140mm – 600mm
• Fully adjustable settings for temperature control and speed.
• Stainless-steel body.
• A highly efficient low noise machine whic...
IMMEDIATELY AVAILABLE STORAGE MACHINE
brand new CNC cycle turning machine
manufacturer STYLE, type Style510 x 1350 with CNC control STYLE
Designed for single parts and small series
Simple and intuitive operation
Modern and ergonomic design
7 models with turning diameters from 300 - 1200 mm
Center distances between 500 and 5000 mm
Precise double prism guide
Stable cast bed with double prism
Full enclosure with CE marking
Optimal accessibility of the working area
Independent and functional design
...
LCT bio. X A 100 Biologically based small parts cleaner including 80 liters LCT Bio Liquid cleaning fluid
Nvl9j
Bag filter
Magnet for separating metal chips
Washable prefilter
Cleaning temperature is a comfortable 41 ° C
Environmentally friendly
Long service life of the cleaner
little space required
additional options are possible:
Filter housing with washable nylon filter
Insert sheet made of V2A to protect the plastic surface
Trolley
cover
IWM Crusader 800 SP Crate or Bin Washer
In perfect working order
Gas fired burner
With dryer facility
Complete with extractor
Year 2013
Io0snuqyg
RC6125WLPX750-2
lathe
distance between centers 750 mm
center height 125 mm
tool height until 12 mm
max. swing ø over bed 250 mm
swing over cross slide 140 mm
range of longitudinal feeds (26) 0,03 / 0,6 mm
range of transversal feeds (l3) 0,02 / 0,22 mm
spindle bore 20 mm
spindle taper MT3
tailstock taper MT2
travel of tailstock quill 65 mm
metric threads (14) 0,3 - 2,5 mm
Bs9rtscc
imperial threads (15) 8 - 35 TPI
spindle speed (6) 125 - 2000 rpm
motor 230 V / 550 W
weight 135 kg / ...
The SIMPRESS 2020 is a full automatic, self-aligning case clamp (cabinet press) - developed for the entire furniture industry: for home, kitchen and bathroom as well as for office furniture manufacturers.
THE ADVANTAGES:
• Optimum power transmission through synchronous, inverter-controlled servomotors
• Precise adjustment of the pressing pressure - adjustable to each type of cabinet (including brewing/45 ° connection), each body material and each body size up to max. 1200 mm (H), 2500 mm (L), ...
Parts shown by hand not come.
Bt3pd9v7d3
Tempering unit
Hjxtmr0tm
Overall dimensions: 600 x 700 x 1600 mm
Weight: 157 kg
Power 6kW
Voltage: 230 V
Refrigerant type: R134.6
Ferro Dec 56 Decoating Medium.
For sale due to outsourcing of coating to a third party supplier.
Total 50 canisters á 10 kg each = 500 kg.
Price EUR 5,00 per kg.
Buex83cpar
ex works, incl. packing
from stock.
At the moment we have onepre-owned F200 machine left on stock. Built year 2015.
The F200 is a 2-station deburring and grinding machine. Suitable for finishing (very) small parts, equipped with vacuum support: for the fixation of non-ferrous and ferrous sheet metal products like stainless steel, aluminium and steel. For deburring, grinding and/or edge rounding of workpieces as small as 15 x 15 up to 200 mm wide.
The F200 is a unique deburring machine that is especially designed for finishing ...
- New machine made entirely of stainless steel including washing pump
- Automatic basket drive
- Touch button to turn the basket outside of the cleaning procedure
- Tank cover and mesh filter under the stainless steel basket
Izfjft9
- Protection against dry running
- Door security switch
- Connections for plate phase separator (oil separator)
- Inner basket width 790 mm
- Usable height of the basket to the lower edge of the nozzle holder
430 mm
- Flat jet nozzles
- washing pressure 3 bar
- in...
Showroommachine
Only worked for demo purposes
2 units
300 mm width
Dimensions grinding belt: 300 x 1900 mm
Grinding thickness 1-200 mm
Dry zone
Belt filter
Wet zone in stainless steel
rotating components in dry zone
Oofwv
Industry machine
labeller, with exhauster
2ruxay
Machine in good condition and perfectly working. It includes a chiller for mold water cooling and a chiller for heating element water cooling.
Bj8oz02i
F200 XL deburring machine: small parts specialist.
Suited for sheet metal parts between 10 and 200 mm wide. Deburring, grinding and edge rounding at high speed.
The F200 XL is a 3 station finishing machine suited for deburring, grinding and/or edge rounding of flat metal parts. This deburring machine has a grinding belt followed by two stationary brushes, one turning clockwise and the other one counter-clockwise. The grinding belt eliminates burrs or can give the product a line grain finish. Th...
We sell an LCT bio.X C 500 washbasin with a stainless steel structure for washing heavy parts up to 1500 KG, which can easily be washed or rinsed on the frame using a washing brush.
The price includes 100 liters of LCT Bio Liquid for washing at an optimal 41 ° C.
Equipment of the washbasin:
Drain cock
Side filter set with washable filters
Round perforated sheet in the washing area can be removed
Filter sieve in the drain also for washing out
Circuit board for time control of the pump and weekend...
JÖRG 5731 / 5704 / 5705 / 5706
Manual Beading machines
Technical details
- Capacity: Zinc 1,1 mm
- 5731 For beading rods Ø 12 - 25 mm,
- 5731 working length 1020 mm
- 5704/5705/5706 for beading rods Ø 14, 16 and 18 mm
- 5704/5705/5706 Working length: 2020, 2520 and 3020 mm
Options
- Beading rods 1 meter and Ø 12, 14, 16, 18, 20, 22 and 25 mm can be supplied from stock.
- Motorized beading machines 1 to 6 meter
- Folding unit
JÖRG 5714
Beading machines ’’Professional’’
Technical details
- Mot...
GRINDING MACHINE VG TYPE T-300-3K/2B
3 x contact roller + 2 x brush unit
Grinding belts: 300 x 1900 mm
Motors: (3x10)+(2x7,5)+1+0,25 HP/34KW/380 V
with:
pneum.grinding belt oscillation
compressed air safety device
Ammeter:3x
Brush unit: 2x
with the feed/5,5kw per unit/spindle dia. 50/brush max. dia. 200/1900 rpm (without the brushes)
7bpoak98n
mot. height adjustment with dig.electron.readout
variable speed conveyor belt 3-15 m/min.
Completely refurbished and repainted.
Guaranty as on new machin...
EXTRUSION LINE for production of filaments for 3D printers, welding wires, strings for garden equipment etc.
• Line speed up to: 100 m/min
Bs9uohl3l3
• Compensator capacity: 140 m
• Extruder output: 5 -20 kg/hr
• Extruder screw and barrel diameter: 45 mm
• Working lenght of the screw: 30 L/D
• Main drive power output: 9,2 kW
EXTRUSION LINE CONSISTS OF:
1. Single-screw extruder BOCOMATIC
2. Cooling stainless tank, drying the strings
3. Haul-off device
4. Triaxial measurement
5. Compensator
6. Wi...
turning diam. Over bed 1.070 mm
Bdu7wyjjki
turning diam. Over carriages 680 mm
Turning length 2.000 mm
Controller 828 Siemens
Max. Load between centre 8.000 kg
Spindle bore 153 mm
Spindle speed – step-less 1- 800 rpm
This is concerning a new machine, previous model, on stock. This is a F200 - VAC machine for finishing (very) small parts, with vacuum support: for fixating stainless, aluminium and other non-ferrous or ferrous sheet metal products. For deburring, grinding and/or edge rounding of workpieces as small as 20x20 mm up to 200 mm wide. Version: 1 grinding belt + 1 brush.
The F200 is a unique deburring machine that is especially designed for finishing small workpieces between 20 and 200 mm wide. The F...
Built in 1999
400 V; 50Hz
1.5 kW
Linishing belt 100 x 1500
Jy0s79mb9
Belt speed 25m / sec.
Weight approx. 50 kg
The Jörg decoilers are easy and conveniant to use in combination with a Plasma or Laser Cutting machine, or the Cut to Length line. For intensive industrial use heavy decoilers are available.
JÖRG 4902
1000 mm x 300 kg, Tilting function
JÖRG 4902
1000 mm x 1 ton
With four support rolls
Decoiler JÖRG, Model AS
(1,5 ton wheels only)
700 x 1,5 ton
1000 x 1,5 ton / 5 ton
1250 x 1,5 ton / 5 ton
2r2jcu
1500 x 1,5 ton / 5 ton
Decoiler JÖRG
Model ASF, self-supporting
1000 x 1,0 ton
1250 x 1,0 ton
D...
CNC Lathe STYLE 510
Producer: Style CNC Machines
YP: 2010
Bson0zqxal
control style
Turning diameter ... 510mm
Turning length ... 1350mm
Spindle bore ... 78mm
Turret head
Circumferential diameter over bed ... 510mm
Circumferential diameter over support ... 300mm
Tool turret ... 8/0
Machine weight ... 3250kg
L x W x H ... 3200x1800x1800mm
The machine is in good condition and can be tested under power.
- with belt grinding machine -second hand-
Bixggbrbbk
- LINDEN MACHINE - MSR/EZ - 900
- with of carpet: 900mm
attached with:
- 1 piece belt grinding unit
- 2 piece round bushes
- WITHOUT MANUAL-
Max. Turning dia. 2.000 mm
Table dia. 1.600 mm
Max. Turning height 2.000 mm
Max. Load 12 ton
Niz7l
ATC 12Pos
Ctrl Fanuc 01
SAW MACHINES FOR FOAM FISCHER TORSO 1140
The manufacturer FISCHER
Model / type of machine TPRSO 1140
Year of manufacture 1978
With sliding table
H2kavet
Single head PVCu window welding machines.
We have two Kombimatec EKS432PLC machines 2001 and 2004 year of producion.
*Excellent condition, fully ready for work.
*Power supply 230V.
Dqoymgrl
*The welding angle of the product is changed from 30 ° -180 °.
The seam closer is designed for easily and quickly closing seam folded tubes fitted with a double seam. The closure is of a high quality. The machine has a variable working speed, and roll-pressure is applied pneumatically.
This machine is entirely designed by Jörg and produced in the Netherlands and is especially strong and carefully constructed to allow years of pleasant and productive work.
Up to 1 mm of St.37 can be processed. The foot pedal is used to clamp, process and tightly seal the t...
I will SELL a production line for the production of EPS polystyrene (EPS Polystyrene Production Line)
Possibility of transport and / or connection of machines by our technicians.
AUTOMATIC POLYSTYRENE EPS PRODUCTION LINE
TECNODINAMICA / HIRSCH / POLIMEC / DAL ZILIO MECCANICA
The production line includes:
--PRE-EXPANDERS--
1. BATCH PRE-EXPANDERS
BATCH PRE-EXPANDERS (discontinuous) TECNODINAMICA mod. TV925, made of stainless steel INOX + dryer + injector + automatic dense control system, contro...
A compact machine for the decoiling, straightening, slitting, and cutting of rolls of zinc, copper, steel, aluminium, stainless steel, and other metals. Fully welded steel construction, compact design with electronic controls.
Standard version
- Straightening unit with 4 rolls and 2 vulcanised feeding rolls, gear driven
- PLC-control: easily programmable with 4 program lines for length and quantity
- Controls on left or right side
- Length measuring with wheel and encoder
- Stable mechanical gu...
Hydraulic press brake
For bending the male snap lock seam at fitting inner corners. This machine is specifically intended for rectangular fittings in the HVAC industry.
Features
The upper punch moves vertically, the sheet is fed in horizontally from the front.
The working width is 620 mm, with a free opening at both sides.
Hydraulic drive: 2 single acting cylinders with spring return.
Foot pedal operated. If the foot pedal is not operated, the pump stops, and the upper punch moves up (open).
Ec...
Jörg makes cutting awesome
Ft2a8ad
Jörg introduces a new concept fiber laser cutting machine: the Jörg Coil Fed Laser, intended for thin sheet, up to 2 mm. Using CAMDuct or EUROSOFT software it is a very powerful machine for cutting the sheets for air ducts, ventilation, insulation cladding, etc. Also suitable for other industries. A compact machine that offers efficient production. Dutch design.
Possibilities
Automatic coil selection
Adjustable straigthening rollers
High material efficiency
Wi...
