Used Turbine for sale (341)

Condition: used, Used Siemens type CFR5 G6A single stage gas expansion turbine. System rated approximately 60,000 Nm3/hr gas feed, 55 bar inlet pressure at 145 deg.c. Includes Loher type JKXK-560MR-04A generator rated output of 3035kW at 1509 RPM with connected power load of 2.8MW. Nodpfoy Aaycex Aarswk Additional information available upon request.

Condition: refurbished (used), functionality: fully functional, We offer 4 Schlick turbines - 320 mm, Nodpfx Aovphf Usarswk including 7.5 kW motors. Turbine model: Schlick ROTO-JET RB500 5.2/4/7.5 Turbine type: 5.2 Abrasive flow rate: 140 kg/min. Abrasive velocity at the outlet: 70 m/sec. Turbines are overhauled, with original spare parts used. Blasting equipment, shot blasting machine, sandblasting machine… PRICE PER UNIT - 2700 EUR.

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 1,000 h, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Nsdpfx Aoxpiw Usarowk Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: used, Year of construction: 2012, functionality: limited functionality, power: 45 kW (61.18 HP), Steam turbine Manufacturer: Siemens Type: AFA 2.5 Year of construction: 2012 Fresh steam pressure: 4.10 bar Fresh steam temperature: 153°C Fresh steam quantity: t/h Wheel chamber pressure: bar Wheel chamber temperature: °C Exhaust pressure: 0.90 bar Exhaust temperature: 140°C Electrical power: 45 kW Rated speed: 3,000 rpm Quick stop speed: 3,600 rpm Steam turbine with generator and vacuum condenser with pumps, without inspection, as is, without overhaul at current location. bps Consulting GmbH CONSULTING | PLANNING | SERVICE Njdpsx H Rwysfx Aarowk Steam turbines | Power plant systems and components info(at)bps-energie.de

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cutting width (max.): 2,270 mm, insertion depth: 9,510 mm, insertion height: 120 mm, cutting length (max.): 3,200 mm, type of input current: three-phase, front table length: 3,200 mm, total width: 6,220 mm, input current: 32 A, total height: 2,000 mm, working width: 2,270 mm, total length: 11,510 mm, input voltage: 400 V, cutting height (max.): 110 mm, working height: 120 mm, input frequency: 50 Hz, Equipment: safety light barrier, The Zünd G3 XL-3200 is a professional digital cutting and routing machine with a working area of 2,270 x 3,200 mm and three module positions. The machine is suitable for both sheet and roll materials and features a conveyor for automatic material transport. The conveyor belt is in excellent condition. Maintenance performed by Zünd, last time on 17-08-2026. The material pass-through is 120 mm. With suitable tooling, materials up to 110 mm thick can be processed. This includes a POT Pneumatic Oscillating Tool with an 8 mm stroke and long 1.5 mm oscillating blades. This combination is suitable for cutting thick and soft materials. The machine features two UM-120 Universal Modules for various cutting, creasing, and marking tools, and an RM-120 routing module. The main tools are: UCT Universal Cutting Tool for standard blade cutting. PPT Passe-Partout Tool for 45° cuts. Nsdpszu Tcfofx Aarewk POT Pneumatic Oscillating Tool for thick and soft materials, with blades up to 110 mm cutting depth. RM-120 Routing Module with a 1 kW high-frequency routing spindle and a 6 mm collet. Set of 6 mm milling cutters for, among other things, foam. This allows the machine to cut, oscillate cut, make 45° cuts, route, drill, and engrave. Automatic tool initialization (ITI) ensures the setting of cutting and routing tools. For material transport, the G3 is equipped with a conveyor belt, a 1,600 mm infeed extension, and a 3,200 mm outfeed extension. In addition, a transport beam, extra drive, and a passive roll-off unit are included. The roll unit can handle material rolls up to Ø350 mm and a maximum of 70 kg. A material guide roll reduces wrinkles and creases during infeed. To secure the material, the machine has a self-regulating vacuum turbine of 1-9 kW. The integrated ICC color camera handles the recognition of registration marks and supports, among other things, border recognition, best-fit, fit-to-object, and fit-to-job. This allows printed materials to also be cut accurately. The machine is controlled with Zünd Cut Center V3.x. The configuration includes Cut Server, Cut Manager, Cut Editor, Cut Queue, Routing Option, and Camera Option. Jobs can be processed automatically via hotfolders. A wireless barcode scanner allows for automatic loading of jobs from the queue. The complete machine configuration is approximately 9,510 x 4,220 mm. Approximately 11,510 x 6,220 mm of floor space is required. The minimum ceiling height is 3,000 mm; due to the guidance of the routing module, a minimum of 3,200 mm must be taken into account for this configuration. Technical connections: 3-phase 323-457 V, 50 Hz, minimum 32 A. 30 mA type B residual current device (RCD). Compressed air 0.8-1.0 MPa (8-10 bar). Compressed air capacity 400 l/min. Minimum floor load 200 kg/m². Industrial dust/chip extraction for routing work. Extraction capacity at least 3,150 l/min, 22-25 kPa, and Ø45 mm connection. In short: a fully equipped Zünd G3 XL-3200 with a cutting area of 2,270 x 3,200 mm, a material pass-through of 120 mm, and processing of materials up to 110 mm thick with suitable tools. The combination of UCT, PPT, POT, and 1 kW RM-120 allows the machine to cut and route a wide range of materials. The conveyor, automatic material feed, roll processing, camera recognition, and workflow automation make the machine suitable for both single pieces and automated production.

Condition: excellent (used), - Dimensions: 610x1150x1460 mm - Model: TRT 120 - Production per cycle: max. 20 litres + Mixing per cycle: 8 to 16 kg - Theoretical hourly production: 75 to 120 litres/hour - Operating ambient temperature: 16°C to 3°C - Air cooling - Pasto multifunction turbine Nwjdpfx Aaewxu Rusrek - Weight: 510 kg - Voltage: 380V

Condition: used, Year of construction: 2008, operating hours: 79,894 h, functionality: fully functional, pressure: 62 bar, power: 5,552 kW (7,548.61 HP), temperature: 480 °C, rotational speed (min.): 10,700 rpm, rotational speed (max.): 11,785 rpm, type of cooling: water, For sale: two complete GTA units (MAN turbine with heat extraction, gearbox, generator, lubrication systems, control systems, spare parts...). One GTA unit is designed for steam at approximately 52 bar and 450°C, the other for steam at approximately 62 bar and 480°C. Please contact us by email for any further information. Nwsdpfx Aaozdqmyorjk Submit your offer per GTA unit.

Condition: ready for operation (used), Year of construction: 2005, A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible. Nodpsywlpxsfx Aarewk

Condition: used, Year of construction: 2017, operating hours: 1,915 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until a deal is concluded, subject to errors, typos, and prior sale: Hako CityMaster 600 with new engine, sweeping unit with water and dirt tank with new engine, front-mounted mower, salt spreader, snowplow (Vehicle 267) First registration: December 14, 2017 10,236 km 1,915 brush operating hours 971 brush operating hours Engine new in 2025, currently 170 operating hours Engine 1,642 ccm 24 kW / 33 hp 25 km/h approval Permissible gross vehicle weight 2,200 kg Unladen weight 1,380 - 1,465 kg Overall length 3,160 - 3,260 mm x overall width 1,085 - 1,200 mm x overall height 1,9985 - 2,202 mm Road approval Articulated steering 2-brush system, adjustable Turbine + water pump on/off Water volume adjustable 3 speed settings for operation Radio/CD Nodjzwru Ejpfx Aarowk Rotating beacon, driver's side, rear 2 headlights at the top + 2 pairs in the middle Rear view camera with monitor, additional camera for monitoring the suction nozzle, automatic switching when reversing Radio with Bluetooth for mobile phone and MP3 Repetition lighting, cabin roof Path sensor 7-pole control cable Universal tires 23.00x8.50-12 Trelleborg T539, front approx. 80%, rear approx. 90% Grammer comfort driver's seat with air suspension Universal collection container 600 L, hydraulically tilting, payload 500 kg, emptying height 142 cm, emptying width 865 mm Hand suction hose for leaves, accumulated dirt, etc., foldable on the passenger side in the middle Universal quick-change roller carriage Vacuum indicator, container, to monitor suction performance and indicate reduced suction performance when the maximum container capacity is reached, as well as a blockage indicator Sweeping unit, 2 brushes, hydraulically adjustable, sweeping width 110 to 180 cm, brush arms with triple impact protection Disc brush, plastic-steel Light weed brush on the right Attachment, suction nozzle, roller carriage, sweeping unit Universal front-mounted mower 122 cm (hydraulically driven 3-blade special mower with rear discharge, working width 122 cm, integrated pendulum compensation, four-wheel drive with cutting height adjustment in 1 cm increments from 4 - 10 cm, transport lock for road travel) Attachment, suction nozzle, mower Attachment, suction (transfer device for connecting the suction nozzle) Salt spreader KIF SS200 (single-chamber spreader with fully hydraulic drive, auger discharge, mixing shaft and folding spreading plate, loading capacity 200 L, hand control for spreading rate and width, working width 1.5 - 4.0 m spreading plate, protection and discharge slide made of stainless steel. Filling sieve, foldable cover, additional protective cover for CityMaster 600. Quick-change base frame for CityMaster 6009, spreader RAL 2011 and 2-layer interior coating, container attachment 130 L, to increase the loading capacity to 330 L for light spreading materials such as salt and granules Spreading control from the cabin, spreading rate, spreading width with automatic start/stop function Snowplow 135 cm, with automatic folding function, rubber edge strip Price: € 29,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of € 10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors

Condition: excellent (used), -Dimensions: 510x875x1400 mm -Serial number: 300758E Nwodewxu R Uspfx Aarok -Condensation: Water -Refrigerant gas: 502 -Water-cooled compressor -Maximum gas pressure: 2000 KPa -Absorbed power: 2.55 kW -Maximum motor power: 1.90 kW -Protection: IP22 -Minimum water pressure: -Min: 200 (2 atm) -Max: 400 (4 atm) -Power: 5.60 kW -Voltage: 380 V -Weight: 115 kg

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-085AAV, Chicago Pneumatic Angle Turbine Grinder CP3T30-085AAV with autobalancer with spindle lock Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Nwodpfxsxwn R Ao Aarjk Specifications: Speed (idle): 8500 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Weight: 2.1 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, We offer a drum-type shot blasting machine with a rubber belt – COGEIM TG1, a machine equipped with a magnetic separator. Year of manufacture – 2015. Overall height – 4595 mm. Drum diameter – 700 mm. Drum working load – 200 kg. Nwodpfeztp Insx Aarok Turbine power – 5.5 kW. Automatic filter. Total operating hours – 10500. The machine can be operated both manually and automatically. Complete documentation is available for the machine. The machine is currently disassembled and stored in a warehouse. Shot blasting machine, blasting, sandblasting, shot blasting, sandblaster.

Condition: used, Year of construction: 2023, 23 electric motors from various manufacturers are offered. 1) 4 × Innomotics 1AV3104A, power: 3kW, year of manufacture: 2024. 2) Hoyer HMA3-132S1-2, power: 5.5kW, year of manufacture: 2021. 3) 2 × Innomotics 1CV3073A, power: 0.55kW, year of manufacture: 2024. 4) WEG W22 02P71, power: 0.55kW, year of manufacture: 2023. 5) 4 × Siemens 1AV3205B, power: 30kW, year of manufacture: 2020. 6) WEG W22 160L-04, power: 15kW, year of manufacture: 2021. 7) FOA AC motors, power: 2.2kW. 8) 4 × WEG W22 100L-04, power: 2.2kW, year of manufacture: 2022. 9) VEM K21R 112 M 6-4 L H TPM140, power: 1/3kW, year of manufacture: 2022. 10) 2 × CEM TCE 80MCY 4 V1, power: 0.55kW. 11) WEG W22 06P90S, power: 0.75kW, year of manufacture: 2024. 12) WEG W22 160M-06, power: 7.5kW. Inspection possible by arrangement. Nwsdszvghqspfx Aarjk

Condition: used, Year of construction: 2001, machine/vehicle number: 14873, LODIGE Coating and Enrobing Turbine Type LHC170 Year 2001 Partially perforated drum volume: 550 litres Drum material: AISI 316, K240 polished finish CIP system Batch size: 165–550 kg Sold complete with: - Turbine - Air treatment unit including: Nwsdpewpwt Hsfx Aarjk - 2-stage filtration (F8 + H13) - 1 preheating coil (steam) - 1 dehumidification coil (chilled water) - 1 main heating coil (steam) - 1 supply fan - Trolley with Watson Marlow spray pump (5 heads) - Dedusting unit - Air outlet filter - Exhaust fan - Sound attenuator - Electropneumatic cabinets - Siemens S7-300 PLC - Operator panel - PC with Lödige WinCC supervision software - Operator panel language: German and French - CIP skid with Prominent dosing pump - All necessary peripherals for operation: - Loading chute - Discharge chute - Sight glass cap - 5 spray nozzles - Flexible connection pipes for the CIP skid Dimensions: L3000 x W2300 x H2700 mm Weight of turbine assembly: 3 tonnes Complete documentation (in French) included: - P&ID - Drawings - Operator manual - Data sheets - Material certificates - Etc. Full program backup performed prior to machine shutdown.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, PRICE REDUCED AGAIN!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. This would certainly be of interest to motorsport and tuning companies. Nwsdpfx Aajzcqy Ejrok The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer, which is a newer, smaller-form-factor HP model. Max. diameter: 350mm Max. test piece height: 500mm (higher measurements are possible, up to a maximum of 1000mm when measured in two halves...) Self-centering of the workpiece: +/- 5mm Max. weight of test piece: 40 kg The system has been used very little and has had only two owners. The first owner, from whom I purchased it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. There is also a sample/sample lens (hemisphere) for calibration! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets using a freight carrier. It is already securely fastened to the pallets. The Talyrond 265 and the desk will be well-protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide excellent service for many years to come!!

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned Nwodpeyidvdjfx Aarsk - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: refurbished (used), functionality: fully functional, We offer 3 OMSG turbines from an OMSG SANDER machine. The turbines come with new 7.5 kW motors, new drive belts, air valves for abrasive dosing, and a 2800 mm turbine wall from the OMSG SANDER, see photos. The turbines have undergone a complete overhaul with new 7.5 kW motors, abrasive dosing units, and a new air distribution system. Nwodpfxoy Awhws Aarok

Condition: used, Year of construction: 2010, Losma Darwin 2000 D Dust Extraction Systems Nwodpfxszwlvco Aarjk 5 units with pre-filter, 2 units with turbine only The systems are sold as is, see pictures. The systems were fully functional until dismantling. The systems are available immediately. The Darwin series is a range of centrifugal dust extractors for cleaning air containing oil-based mists, micro-mists, and vapors that are generated during the use of coolants (emulsions and neat oils). It can be used on all types of machine tools and in all machining processes. The Darwin series uses a double combination of filtration: dynamic (through the rotation of the centrifuge) and static (with the integrated post-filtration system) to guarantee high performance.

Condition: used, functionality: fully functional, type of input current: three-phase, TECHNICAL SPECIFICATIONS: Nwodoxyirmepfx Aarek - Engine: 50 kW - Capacity approx.: 30,000 m3/h - Motor speed: 2960 rpm - Impeller blade height: 230 mm - Impeller speed: 2350 RPM - Number of blades: 8 - Inlet diameter: 500 mm - Outlet dimension: 480 x 380 mm - Overall dimensions (L/W/H): 240 x 150 x 150 cm - Weight: ~600 kg

Condition: used, Year of construction: 2006, functionality: fully functional, air demand: 4,000 m³/h, pressure: 5 bar, operating pressure: 7 bar, inner dimension width: 900 mm, workpiece weight (max.): 1,000 kg, filter area: 120 m², input voltage: 380 V, working range: 1,400 mm, tank capacity: 960 l, suction capacity: 4,000 m³/h, Equipment: cabin, documentation/manual, Automatic hook-type shot blasting system complete with monorail overhead conveyor, abrasive recovery system, bucket elevator, pneumatic shot selector, vibrating screen, dust collection filter, and control panel. Main features: Maximum workpiece diameter: 900 mm Maximum workpiece height: 1,400 mm Maximum load weight: 1,000 kg No. 6 hook holders No. 4 Carlo Banfi X1 centrifugal turbines Turbine power: 4 x 7.5 kW Abrasive flow rate: 300 – 360 kg/min Abrasive capacity (initial charge): 960 kg Power supply: 380 V three-phase – 50 Hz Total installed power: approximately 22 kW Carlo Banfi PS-6B dust collection filter included: Air flow rate: 4,000 m³/h Filter area: 120 m² No. 6 microfibre filter cartridges 4 kW suction fan Automatic cartridge cleaning system with compressed air Required compressed air pressure: 5 – 7 bar System suitable for shot blasting and surface cleaning of castings, metal structures, mechanical components, stamped parts, and steel products. Machine complete with shot recovery and recycling system, electrical panel, and original technical documentation. Includes spare parts, including motors and parts for the blasting chamber. Nsdpfx Aaszdqtmjrswk Video of the machine in operation available upon request. Another identical shot blasting machine is available.

Condition: used, Year of construction: 2017, machine/vehicle number: 117119, Ref. no. 25158 Technical specifications: - Airflow approx. 220 m³/h - Dust class M - Connection nozzle: 50 mm - Drawer Nwodpfx Aajxay D Horsk - Pneumatic connection - Drive power: 400 V / 1.3 kW - Required space: W 1000 x H 1350 x D 500 mm - Weight approx. 120 kg

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer a new table blasting machine – high-quality Czech manufacture, with premium materials used in production. Model: TSM 360-1.5 - Rotating table diameter: 1,500 mm - Maximum blasting part height: 550 mm - Total machine height: 3,000 mm - Total machine width: 2,000 mm - Total machine depth: 1,600 mm - 1x throwing turbine – power: 7.5 kW – with frequency inverter The turbine supports both left and right rotation. Nwodpfx Aaew Nbycsrek - Bucket elevator – power: 1.1 kW - Table rotation – power: 1.1 kW – with frequency inverter Table rotation can be manually controlled via button. - Total machine power: 9.7 kW The machine features a frequency inverter for adjustable turbine speed. A major advantage is the ability to switch turbine direction between left and right rotation. Blasting unit is CE-certified. Additional advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, this model stands out as a highly advanced table blasting machine due to its concept and design. (Blasting machine, sandblaster, shot blasting, blast cleaning, sand blasting, blasting equipment).

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 43,000 h, For sale: TRUMPF L3030 laser cutting machine YEAR 2001 LIFTMASTER+ with loading and unloading shuttles 3000 WATT FORMAT 3000X1500 MAGNETIC TURBINE Nwedpfx Aaszq R D Serok SIEMENS control

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-120AA5V, Chicago Pneumatic Angle Turbine Grinder CP3T30-120AA5V with autobalancer with spindle lock with tool-free adjustable protective cover Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Speed (idle): 12000 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Grinding wheel Ø outside max.: 125 mm Weight: 2.4 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Nedpfx Aaovptx Tsrjwk Required air quality: dried and oil-free

Condition: ready for operation (used), Year of construction: 2021, A total of six Franz Wölfer three-phase asynchronous motors for converter operation are available. 1) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, duty type: S1, direction of rotation: right, weight: approx. 2190kg. Including second shaft end for emergency drive and magnetic encoder Hübner MAG-PG 200-128-N. 2) Franz Wölfer ODRK 225L-4bT, year of manufacture: 2021, moment of inertia: 0.57kgm², rated power: 190kW, power factor: 0.94, rated speed: 3500rpm, duty type 40%: S3, weight: approx. 510kg. Including encoder POG 10. 3) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, duty type: S1, direction of rotation: left, weight: approx. 2190kg. Including second shaft end for emergency drive and magnetic encoder Hübner MAG-PG 200-128-N. 4) Franz Wölfer DRK 250M-4T, year of manufacture: 2021, moment of inertia: 0.5kgm², rated power: 45kW, power factor: 0.94, rated speed: 2066rpm, duty type: S1, weight: approx. 410kg. Including encoder HOG 10. 5) Franz Wölfer DRK 250M-4T, year of manufacture: 2021, moment of inertia: 0.5kgm², rated power: 45kW, power factor: 0.94, rated speed: 2066rpm, duty type: S1, weight: approx. 410kg. Including encoder HOG 10. 6) Franz Wölfer DRK 250M-4, year of manufacture: 2021, moment of inertia: 0.5kgm², rated power: 45kW, power factor: 0.94, rated speed: 2066rpm, duty type: S1, weight: approx. 410kg. Including encoder HOG 10. Documentation available. An on-site inspection is possible. Individual sale possible. Nwjdpfszcp T Dox Aarok