Used Steam turbines for sale (12)

Condition: like new (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: AFA 4 G5a, pressure: 6.6 bar, power: 781 kW (1,061.86 HP), The steam turbine only has a short service life and has only been used once. The control system is located in a Siemens Simatic Mulitpanel control cabinet. The plant has a control panel, a concrete base, the turbine and the generator. The output is 781 kWe at 6.6 bar(a). - Steam turbine (AFA 4 G5a) integrated gearbox Electronic speed control/steam pressure control and live steam pressure limiting control (downwards) - Electronic quick-closing device with separate valve - nozzle group valves for better partial load behavior - Oil supply according to Frankenthal factory standards, water-cooled - Safety and monitoring equipment in accordance with Frankenthal factory standards Flexible coupling according to torsion-critical analysis Synchronous generator 0.4 kV, IP 23 (optional IP 44 R), roller bearings, air-cooled Mechanical test run on the test benches at the Frankenthal plant Dqkgaf - Automatic operation from the control system - IP 42 monitoring cabinet, incl. synchronization, in accordance with VDE/IEC, for installation close to the generator, in accordance with the contractor's standards, without power section - Blue color scheme

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, pressure: 20 bar, power: 774.8 kW (1,053.43 HP), frequency: 50 Hz, temperature: 350 °C, input voltage: 300 V, rotational speed (min.): 1,500 rpm, rated speed: 1,500 rpm, Two steam turbines are for sale, the high-pressure and low-pressure turbines are connected together to a generator. Dqt0Lb These can also be operated individually.

Condition: ready for operation (used), Three identical ABB electric motors are available. Voltage supply: 380V-690V, motor type: three-phase motor, switching frequency: 2kHz, max. overload time: 10s, cooling time: 10min. PTC sensor included. Documentation available. On-site inspection is possible. Crk3Pkcvok

Condition: ready for operation (used), Year of construction: 2008, operating hours: 60,000 h, Steam turbine including gearbox and generator, hydraulic system, switchgear and various accessories Make: MAN Type: MARC 1 - CO2 Operating hours: 60,000 - general overhaul was carried out after 40,000 hours Czrmco0Ray Biomass heating plant, entire plant is for sale. Viewing on request. All nominal values are included in the exposé.

Condition: new, Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 8330006 A101, frequency: 50 Hz, type of input current: AC, temperature: 40 °C, input voltage: 39 V, overall weight: 9,900 kg, total height: 1,000 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,800 rpm, total length: 3,000 mm, total width: 1,500 mm, rated speed: 1,500 rpm, type of cooling: water, nominal current: 3 A, Steam turbine Type AR 3MW - New unused. Originally bought for a waste incinerator project but never installed or used. 98X0Z99

Condition: good (used), Year of construction: 2018, operating hours: 27,240 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Dqmsox Year Built 2018; installed date 2020; starting for production Jan. 2021; working hours 27240H (just for reference); power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC surface cooler & extractor; Sulter Dalian condensate pump; Condition installed; the technical information available upon request

Condition: ready for operation (used), Year of construction: 2012, A complete system consisting of generator, turbine, gearbox, housing, exhaust gas duct and stack is available. 1) Gas turbine: Nominal output at ISO conditions: 1850kWe, fuel: natural gas, calorific value (LHV): 38.8MJ/kg, mass flow rate: 8.7kg/s, max. exhaust gas temperature: 571°C, max. exhaust gas flow: 221kg/s, turbine speed: 26000rpm, operating hours: approx. 20000h. 2) Generator: Type: Synchronous generator LSA 53 VL80/4p, rated power: 2316kVA/10.5kV, 127A, speed: 1500rpm. 3) Gearbox: Type: 2-stage planetary system GB24-1500, transmission ratio: 6.7:1, weight: approx. 350kg. Total system operating hours: 81269h. Documentation available. On-site inspection is possible. Clxomxhv

Condition: good (used), Year of construction: 2018, operating hours: 13,993 h, pressure: 97 bar, power: 40,554 kW (55,138.03 HP), overall weight: 100,000 kg, rotational speed (min.): 4,648 rpm, MAN Diesel & Turbo SE DK080/250R Industrial Steam Turbine Year Built 2018; installed date 2020; starting for production Oct 2020; production stop Jul 2022; working hours 13993H; Dqmsmr power 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar; Inlet Temperature Normal/Max 525/535 ℃; weight 100,000kg each; size 5900x5330x5170mm each; includes HTAC extractor, Sulter Dalian Condensate Pump; Condition dismantled by OEM; the technical information available on request

Condition: ready for operation (used), Year of construction: 2007, Voltage: 460V, Torque: 1161Nm, Power: 500kW, Speed: 2300rpm, Insulation class: H, Operating mode: Continuous operation (S1), Protection class: IP 23 S, Ventilation: IC 06, Shaft diameter: 95mm, Machine dimensions X/Y/Z: approx. 1350mm/550mm/550mm. On-site inspection is possible. D7V0Dgo

Condition: ready for operation (used), Ambient temperature: 0°C/+40°C, max. altitude over sea level: 1000m, rated voltage: 6kV/50Hz, rated speed: 1500rpm, rated power: 14MW (14000kW), design: B3 (floor-mounted), protection class: IP54, efficiency: over 95%, cooling system: air-water cooling, operating mode: continuous operation, starting method: direct starting, direction of rotation: bidirectional, insulation class: F (B), weight: approx. 25500kg. Including DC excitation, external lubrication unit, 6x RTD in stator windings and anti-condensation heating. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging. Dppc7T

Condition: ready for operation (used), Year of construction: 2005, Three identical VEM three-phase high-voltage asynchronous motors are available. Rated power: 8.5MW (8500kW), voltage: 6000V, frequency: 50Hz, speed: 1500rpm, protection class: IP55, cooling: water, insulation class: F, bearings: roller bearings, vibration class: A, weight: approx. 30000kg. Including an oil lubrication unit overhauled in 2019 and 2x exciter cabinets. Documentation available. On-site inspection is possible. Cqt7Vicyvy

Condition: ready for operation (used), There are 26 motors available. Cfiw09Euj0