Used Fertiliser Spreader for sale (563)

Condition: used, machine/vehicle number: FN597668, Year of construction: 2019, operating hours: 6,532 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,000 mm Fork length: 1,200 mm Fork spreader: 550–1,720 mm MACHINE DETAILS Mast: Free-lift mast without a central hydraulic cylinder Machine type: Electric forklift Year of battery manufacture: 2017 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 84.1 V Dimensions & Weight Dimensions: 3,900 × 1,250 × 2,620 mm Own weight: 5,200 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 6,532 h EQUIPMENT Former Jungheinrich full-service unit 3rd and 4th valve Free-lift mast Fork spreader with side shifter Full cabin Heater Windshield wiper LED work light (front) Comfort seat All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Nsdpfxjz S Nqfs Akiown Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 140

Condition: repair required (used), Year of construction: 2025, functionality: limited functionality, machine/vehicle number: 24163 / 24191, Bakery Machines For sale as: used and partially damaged/contaminated – no warranty, no guarantees, sold as is, “as is, where is” Nwjdpfx Akj Afmqhjion Depositor + accessories & topping applicator + cleaning cart Manufacturer: bmTEC Machine specifications: see downloadable PDF Condition: used/damaged, in operation from early 2025 to early 2026 Damage to the “Depositor”: Only the “Depositor” is mechanically damaged. During loading, the “Depositor” tipped over to the side and fell to the floor. The frame of the “Depositor” is bent. The gap dimensions vary considerably. Inside, residues from rodents and dirt are visible due to storage. In the area of the product inlet, a compression of the frame can be seen. One of the conveyor belts shows no tension. Inside one of the installed control cabinets, a plastic cover and a screw are lying loose. The “Topping Applicator”, which is controlled via the “Depositor” and the control cabinet installed there, shows no visible defects other than the usual signs of wear. However, soiling is also visible here. No visible irregularities can be seen on the sheets belonging to the machine and on the cleaning cart. Sales basis: loaded onto a truck at the location 83562 Rechtmehring

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 201269, total width: 1,150 mm, total height: 1,650 mm, total length: 900 mm, working width: 700 mm, input voltage: 230 V, type of input current: three-phase, overall weight: 170 kg, power: 0.75 kW (1.02 HP), passage height: 100 mm, height adjustment type: mechanical, working height: 850 mm, roll width: 700 mm, input frequency: 50 Hz, input current: 16 A, Equipment: CE marking, The used roller coating machine for adhesive is designed for applying adhesives such as glue to various surfaces, including veneer, aluminum veneer, and other materials used in the furniture, parquet, and woodworking industries. The machine is also suitable for materials such as plastic, cardboard, textiles, wood, and more. Nwodpfxs Aayrno Akisn The adhesive roller coating machine uses an adjustable adhesive reservoir for even and precise adhesive distribution. The speed of the adhesive roller and the transport roller can be adjusted using a frequency controller. The machine can operate at speeds ranging from 5 to 50 m/min. The feed height can also be adjusted using a handwheel. The machine is fully functional and has been inspected in our workshop.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, OSAMA: IDEALTECH HEATED ROLLER MACHINE MODEL HOTMASTER, GLUE MELTER AND ROLLER PRESS The line includes: 1 feeding conveyor with a COSMA cleaning brush 1 IDEALTECH GLUE MELTER 1 OSAMA GLUE APPLYING MACHINE 1 OSAMA central conveyor 1 press (6 pressing rollers, 3+3) 1 COSMA discharge conveyor Metering and application rollers with resistors/oil heating system of 8 kW x 2 Nwodpfsz Ng Agex Akisn - No. 03 motors at the end of the application and metering rollers, independently controlled - Adjustable speed via no. 03 electric frequency regulators with an automatic "reverse" rotation system for the rollers to clean the machine at the end of the work cycle - Heating system with thermal oil and electric resistors - Automatic/motorized lifting of the upper rollers with digital position display - Top applicator 3 kW + bottom applicator 3 kW + top metering device 0.75 kW - Part movement control 0.55 kW - Lifting torque of the top rollers 0.18 kW - No. 02 motorized steel rollers at the machine inlet - No. 02 motorized steel rollers at the machine outlet - Stainless steel tray for machine cleaning - The machine is programmable to heat the rollers automatically without any control or operator intervention - Machine ready for the application of glue guns for the application of PUR glue, without glue guns - Machine ready for integration into a production line * No. 01 tube for PUR glue fume extraction, 145 mm diameter. HIGH-TECH AUTOMATIC 6-ROLLER PRESS MODEL CLR/6-1300 STANDARD CE, VOLTAGE 400/50 3PH Complete machine consisting of: - Inverter speed variator motor - Independent pressure adjustment system for each pair of rollers, with a shared pressure sensor display between the main pressing rollers and the secondary drive rollers - Reinforced structure for high working pressure No. 02 + 02 (four) rubber pressing rollers, Shore hardness 90 +- 5 Shore No. 02 (two) rollers positioned in the middle, made of chrome steel Roller diameter: 300 mm Useful working width: 1300 mm Minimum/maximum working height: 0-100 mm Video available upon request.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, working width: 1,800 mm, cutting height (max.): 30 mm, compressed air connection: 10 bar, An exceptional opportunity to acquire a fully integrated, high-performance automated multi-ply CNC cutting solution. Commissioned in August 2023 and kept in excellent condition, this complete VetiGraph / Serkon Makina setup is available for immediate purchase. Full UK delivery, professional decommissioning, transport, and complete onsite re-commissioning are all included to get your facility running quickly and smoothly. Get a complete factory upgrade at a fraction of the cost of new equipment. Package includes: * Serkon MC30 Multi-Ply CNC Cutter: 30mm compressed cutting height, 180cm width, continuous conveyor, drill and vortex knife cooling. * MN1 Fabric Spreader & ML2 Roll Lift: Automatic tension-free laying with a 9m x 2m air-flotation table. * Complete CAD/CAM Suite: Includes VetiGraph Pattern Design, Automated Marker Nesting, and FastJet Twin-Head Plotter. * iDigit Photo Digitiser: Quickly converts physical patterns to vector files. Full Turnkey Package: Includes UK delivery, complete installation, fully setup commissioning, 7 days of total onsite training, and a 6-month warranty. Avoid long manufacturer lead times and substantial capital outlay. This complete system is ready for immediate inspection in Preston and fast deployment to your facility. Delivery & Installation: * For deliveries outside the UK, the machine is supplied on an Ex Works (EXW) basis. The buyer is responsible for arranging and covering the cost of international transport, import duties, taxes and any local delivery charges. * Installation and commissioning can be provided by our engineers at an additional cost. For overseas installations, additional charges will apply to cover engineer travel, accommodation and associated expenses. * Please contact us for a quotation for installation and commissioning to your location. Nwjdpfsz A D Ryjx Akisn

Condition: used, total length: 1,000 mm, total width: 400 mm, total height: 1,100 mm, Year of manufacture: 2020 Colour: White Empty weight: 100 kg - Year: 2020 - CE marking present: Yes - Serial number: 200120 - Max. working width [mm]: 450 - Max. work thickness [mm]: 30 Nedpfx Akj Aayddsiswn - Voltage [V]: 240 - Fuse [A]: 16 - Power [kW]: 0.3 - Transport dimensions: 1000mm x 400mm x 1100mm (l x w x h) - Transport weight [kg]: 100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, STREUMASTER SW3 FC 3 Cubic Meter Lime Spreader Soil Stabilizer Container: • Year of manufacture: 2017 • 3 m³ container volume • Filling connection: 3" / 3" Spreading mechanism: • Working width: 2,460 mm • Partial widths: 3 x 820 mm • Spreading rate at 1 km/h: 1-50 kg/m² (with a binder density of 1 kg/liter) Weight and dimensions: Nwedpfx Aswv H Nqskisn • Tare weight: 1,250 kg • Dimensions: 1,600 x 2,550 x 1,990 mm Tractor requirements: • Three-point linkage: Category 2 DIN / ISO 730 - 1 • Required hydraulic output: 50 liters/min at 180 bar • Max. permissible hydraulic flow rate: 75 liters/min • Electrical system: 12 V - Loading capability available! - Only 1 owner! - German machine! - Ready for use! Errors and prior sale excepted! = Further information = Year of manufacture: 2017 Design year: 2017 Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: excellent (used), power: 58 kW (78.86 HP), operation weight: 12,000 kg, Year of construction: 2006, operating hours: 4,870 h, BOMAG BW174 AD with BS180 spreader Asphalt Manager Year 2006 Operation hours: 4.870 hrs. Drum width : 1.68m Cummins engine with 58 kW Nwodj Afhi Sepfx Akion CE / EPA Operation weight: 12 to

Condition: good (used), Year of construction: 1983, functionality: fully functional, THOROUGHLY CLEANED AND REPAINTED MACHINE Working width 1,300 mm Roller diameter 149 mm Feed rate 22 m/min Max. pass height approx. 100 mm Mobile version with 2 rollers on the rear machine frame Nwodozxr Uhjpfx Akion Connection data: 400 V, 50 Hz, 3-phase, N

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working width: 30 cm Adjustable glue application rate Single-sided glue application Emergency stop button (mushroom switch) Feed table with rollers Total table length: 130 cm Weight: 150 kg Nsdezxpvvopfx Akiewn 380 V Year: 2003

Condition: ready for operation (used), functionality: fully functional, External dimensions: 2500 × 1300 mm Stepless feed speed adjustment Year of manufacture: 2017 Motor power: 0.75 kW Nodpfxjzxz H Hj Akiswn

Condition: used, New: Yes Nwsdpez S Dlqjfx Akion Colour: Grey

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Maximum element height: 100 mm Nedpfx Akjz Agvhoiswn Manual adjustment of roller spacing Simultaneous application of adhesive to the top and bottom surfaces

Condition: like new (used), functionality: fully functional, Working width: 300mm Manual adjustment of roller spacing Two glue application speed settings Safety switch Mobile design Nedpfx Aez E U E Hjkiown

Condition: ready for operation (used), functionality: fully functional, Working width: 1300 mm Manual adjustment of roller spacing Cleaning brush Safety switch Nsdpfx Aksz E Rlpoiown Mobile design

Condition: used, operating hours: 13,853 h, lifting height: 5,000 mm, fuel type: gas, mast type: triplex, power: 55 kW (74.78 HP), General information Year of manufacture: 2017 Year of construction: 2017 Weights Empty weight: 8.470 kg Functional Nwsdpfxez I A Sye Akien Lifting capacity: 4.500 kg Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Free lift - Pneumatic shaped solids - Roof window = More information = Make of engine: Kubota Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2004, Control unit, factory reconditioned used cleaned functionally tested partially overhauled Manufacturer: Ganner Type: 252/N Year of manufacture: 2004 Machine no.: 756 484 CE type-tested Adhesive container capacity: 5 liters Dowel diameter: 8 mm Dowel length: 30 mm With adhesive supply Water flushing Nwsdpfxoz I D Aae Akien Glue gun mobile Space requirement approx. L x W x H mm: 600x600x1200 Weight approx. kg: 100 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without guarantee and warranty

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU21C0001, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, input current: 40 A, Brand new , never used Versa PUR Tank Melter for PUR glue application. This aggregate is stil in its original packing . The aggregate comes from close down of a factory here in Norway. Nedpfx Asz Sqppjkiown Ready to be send . Please contact me for more information.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2009, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, total length: 14,040 mm, total width: 2,600 mm, wheelbase: 9,060 mm, color: white, General Information Year of construction: 2009 License plate: OK-91-SY Nwodpfoz Azf Dsx Akijn Axle Configuration Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Unladen weight: 8,500 kg Payload: 33,500 kg GVW (Gross Vehicle Weight): 42,000 kg Condition Overall condition: fair Technical condition: fair Optical condition: fair = Company Information = You can find our complete range of products here: /

Condition: new, color: yellow, Spreader for salt and green manure, among other things. Infinitely variable speed setting of the sowing shaft and an adjustable bottom flap Nwjdj Aar Rcopfx Akijn 12 volt - electric operation 5 outlets - 5 spreading funnels Multifunctional construction and usage options. Turbo 5 is on the right in the photo, with the 5 outlets. Condition: New

Condition: excellent (used), functionality: fully functional, AUTOMATIC GLUE SPREADER with 2 rollers model OMMA FT 1300 second hand machine Nwodpfx Aksz R Dwdoien n.02 rubber rollers CE mark : Yes max. working length mm. 1300 volt. 380/50

Condition: used, Year of construction: 2011, Double auger spreader Nodpsx Svryofx Akijwn Drive via vehicle hydraulics Capacity: 1.8 m³ Brine: 840 l Adjustable spreading width CONTROL PANEL FUNCTION NOT TESTED Sale in current condition and only to other businesses! Our business hours: Mon-Thu: 07:00 am - 03:30 pm Fri: 07:00 am - 03:00 pm Offer subject to our general terms and conditions! Sale only to commercial customers! Used vehicles / used equipment sold without warranty of defects as per our terms and conditions! If you have further questions, I am happy to assist you. For viewings and/or test drives, please schedule an appointment in advance! Vehicles/equipment are not always on site.

Condition: used, Year of construction: 2014, functionality: fully functional, Roller Glue Spreader OSAMA SBR 250 Nwodpfx Aez H H Ivjkijn Working width: 230 mm Working height: 0 – 100 mm Applicator roller diameter: Ø 150 mm Feed speed: 28 m/min Motor power: 0.18 kW CE marking

Condition: used, Year of construction: 2022, _____Pump Tank Trailer KTR 18.5 Tandem, Professional Equipment: Year of Manufacture: 2022 Approx. 32,000 m³ capacity 24 tons permissible total weight Fenders Lower hitch, 4-ton support load K80 Drawbar, hydraulically height-adjustable All suction lines, except for slide valves and quick couplings, are 8" Vogelsang 6000 l rotary lobe pump with injection system, Changeable impellers and reduction gearbox Suction on the left side, 6" with quick coupling and stone trap All slide valves as pneumatic slide valves / stainless steel blade (clog-free) Automatic filling shut-off Nwsdjz Dmaajpfx Akien Preparation for cutter and suction arm Preparation for trailing shoe Hose rack for suction hoses Single-sided wide-angle universal joint with overload protection Tires 750/60 R 30.5 TÜV approval, 40 km/h 2 LED work lights LED lighting system Preparation for lifting device Special equipment: (1124-B) Kumm-Profi-Pad 7" touchscreen operation Application rate display Individual button assignment for the respective hydraulic functions, such as lowering/raising boom, adjusting boom, connecting arm, pre-set program for Bomech trailing shoe One press of a button and the stored function runs in sequence! (1124-C) Application rate regulation Automatic application rate regulation depending on driving speed, controlled via Kumm-Pad (1124-D) Vogelsang rotary lobe pump 6,000 liters with injection system and changeable impellers (1124-E) Tires 750/60 R 30.5, standard (1124-F) Two-chamber system, standard Two-chamber system as standard. Emptying: First at the rear, then at the front. (1124-G) Air suspension with lifting/lowering valve, standard (1124-H) BPW trailing steering axle, hydraulically lockable (1124-I) Fenders, standard Extremely large wheel cut-outs for a very low center of gravity and the greatest possible steering angle (1124-J) Lower hitch K 80, 4.00 tons support load, standard (1124-K) Hydraulic support leg, standard (1124-L) Drawbar, hydraulically height-adjustable and sprung, standard (1124-M) All suction lines, except for slide valves and quick couplings, are 8", standard (1124-N) Suction nozzle at the front left with pn. plate slide valve and 6" quick-release coupling (1124-O) Automatic filling shut-off (1124-P) Preparation for cutter and suction arm (1124-R) Preparation for tire pressure control system Preparation for the installation of a tire pressure control system, standard! BPW axles pre-drilled! (1124-Q) Preparation for trailing shoe and trailing hose booms (1124-S) Preparation for suction boom above Preparation for the installation of a suction boom above the vehicle, standard. Connection for front pump station, standard (1124-T) Walterscheid universal joint Walterscheid universal joint, single-sided wide-angle (1124-U) Blow-out function Possibility of emptying the entire boom system by means of compressed air (1124-V) LED lighting Rear lights completely LED. Turn signals with dynamic indicator (similar to "Audi" turn signals) (1124-W) Preparation for lifting device Possibility of installing a lifting device with 3/4-point mounting (1124-ZA) Forced steering, electric Forced steering, electro-hydraulic, suitable for KTR tandem vehicles (1124-ZB) Axle load relief Axle load relief at the touch of a button (to increase the support load, the front axle is relieved) (1125-J) Cutter for KTR Cutter Vogelsang Rotacut 10,000 Suction arm KTR, single-jointed Suction arm 8", single-jointed with slide valve, ventilation, Pressure limitation, incl. operation from

Condition: used, Year of construction: 2015, operating hours: 9,319 h, lifting height: 4,900 mm, fuel type: electric, mast type: triplex, battery manufacturer: Emrol, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,600 mm, Year of manufacture: 2015 Empty weight: 3.600 kg Lifting capacity: 2.000 kg Maximum passing height: 212 cm Number of valves: 3 General condition: average Technical condition: average Visual appearance: average Mast type: triplex = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = Nwjdpjz I Akpefx Akisn - 4th valve - Free lift - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 EPA Marked: yes Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information