Used Tube Bending Machine for sale (65,765)

Condition: excellent (used), Year of construction: 2008, Technical data: Lrjdpfxeytr Rmo Adqei Working width: 3100 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Conical bending device via tilting of both side rolls Hardened rolls Mobile control panel with digital display Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2019, tube diameter 28 mm wall strength 2 mm bending radius min. 90 mm Lsdpfx Ajxcuhrjdqeri control 3D TubeSoft Slim total power requirement 3,5 kW

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Lredpfjxacbusx Adqsi Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Ljdpfxexaafds Adqsri Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector Lodsxacfgjpfx Adqsri - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: as good as new (ex-display), Year of construction: 2022, sheet width 1070 mm plate thickness 4.0 mm pre-bending 3.0 mm roll length 1070 mm roll diam. toproll 110 mm bending speed 3.0 m/min engine output 2.2 kW weight 848 kg Ledpexacdpjfx Adqsri range L-W-H 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW (!!) Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (top & bottom roller) - right/left running of the rollers - top roller can be manually swiveled out, with folding bearing - manual delivery of the side roller - including conical bending device - asymmetrical roller arrangement - rollers with profile inlets - safety device (safety line with switch unit) - 1x freely movable control panel - operating instructions (ENG)

Condition: as good as new (ex-display), Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Ljdpoxab Hvefx Adqjri Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: new, Year of construction: 2026, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each Lrodpjxabu Hsfx Adqei - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm Lrsdjxabkbopfx Adqji diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4,5 mm max. plate thickness 4,0 mm anbiegen roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg Lrodpfjxaawgex Adqei range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine Lrodpexaacvefx Adqji - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) Lrjdpfxew U U Ude Adqsi - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: new, Year of construction: 2026, shaft diameter: 80 mm, - Ring bending machine Ledpfxeg Sr I Ue Adqori - Shaft diameter 80 mm - Lower two rollers are moved hydraulically - Three rollers driven - Hydraulically adjustable guide rollers - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, shaft diameter: 30 mm, - Shaft diameter: 30 mm - Rotates both clockwise and counterclockwise - Usable horizontally and vertically - Foot operation - Emergency stop - Documentation - 400 V Lrjdpsxgb A Djfx Adqsi

Condition: new, Year of construction: 2025, rotational speed (max.): 50 rpm, - Ring bending machine – Shaft diameter 50 mm – The top roller is moved hydraulically – Digital display – Can be used horizontally/vertically – Foot control – Emergency stop Lrjdjlp Ryhopfx Adqji – Documentation – 400 V

Condition: new, - Capacity 700 x 2 mm - Conical rolling - Removable top roller - Foot control - Emergency stop Lrsdpjihv Hpjfx Adqoi - Documentation - 400V

Condition: new, - Capacity 1070 x 2 mm - Conical rolling - Removable top roller - Foot control - Emergency stop Lrjdpfx Ashc Uvmodqoi - documentation - 400V

Condition: new, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, side roll diameter: 140 mm, roller diameter: 140 mm, roller length: 2,070 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, - Capacity 2070 x 4 Lsdpfehvr Nlox Adqsri - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamp) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamp) - Continuously adjustable speed - Hardened rollers - Tapered rollers - Removable top roller - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, roller diameter: 180 mm, - Capacity 2070 x 8 mm (minimum diameter 900 mm) Ljdpfx Adsvn Eqroqori 2070 x 6 mm (minimum diameter 270 mm) Pre-bending capacity 2070 x 6 (minimum diameter 900 mm) Pre-bending capacity 2070 x 4 (minimum diameter 270 mm) - 4 rollers - Hydraulic - Hardened rollers - Diameter of upper roller 180 mm - Diameter of lower roller 180 mm - Diameter of side rollers 150 mm - Digital display for the movement of the left roller - Digital display for the movement of the middle lower roller - Digital display for the movement of the right roller - Upper roller is hydraulically foldable - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down Removal system with middle and side rollers - Hydraulic balancer system - Overload protection - Documentation - 400V

Condition: good (used), You are bidding here on a branded guillotine shear and a folding machine from the well-known German manufacturer Schechtl. Device features: - Guillotine Shear MSB 200: - Cuts 3 mm steel – significantly more for aluminum - Cutting length: slightly over 2 m - Front support table - 500 mm back gauge - Optional sheet metal tray - Free loading available - Folding Machine Schechtl MAX 200: - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2.5 mm (steel, sheet metal, aluminum, zinc, etc., higher for softer materials) - Standard rail – special radius rails for aluminum and zinc available upon request (add-on and special rails) - Foot pedal operation - Optional back gauge We also have available: Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2 mm), segmented RAS 2 m / 2 mm, and many others from 1 to 6 m. You will receive an invoice with VAT shown separately. Shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and testing possible by prior phone appointment. Payment in cash upon collection – if you need anything else, please give me a call. Thank you! Lrodpfsyviwqjx Adqei Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation Ledpjyrf Dksfx Adqsri

Condition: new, Year of construction: 2025, - Capacity 1070 x 5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital display for rear roll movement - Hardened rolls Lodpsgg Nv Sofx Adqori - Conical rolling - Emergency stop - Documentation - 400V

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Sahindler - Scantool profile bending machine Model PV 60 NC Lodpoytb U Uofx Adqjri Year 2019 - New / Demo Roll diameter : 215 mm. Capacity flat iron : 120 x 25 mm. Capacity flat iron on edge : 80 x 20 mm. Capacity angle iron: 70 x 7 mm. NC control 1 set profile bending rolls Hydraulic top roll movement Bending support Footpedal

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: CYBELEC, controller model: CYBTOUCH 15 2D, working width: 3,100 mm, throat depth: 450 mm, number of axes: 4, type of crowning: CNC-controlled, overall weight: 7,600 kg, total length: 4,360 mm, total width: 2,760 mm, total height: 1,745 mm, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Hydraulic Press Brake / HYBRID COMFORT PLUS 135T 3m: Pressing force: 135T Bending length: 3,100 mm Distance between uprights: 2,600 mm Stroke: 265 mm Throat depth: 450 mm Maximum opening: 470 mm Ram height: 925 mm Descent speed: 190 mm/s Return speed: 140 mm/s Working speed: 10 m/s Machine dimensions: 4,360 x 1,745 x 2,760 mm Weight: 7,600 kg Motor power: 11 kW Standard features: Lsdpfx Adsxukbrsqjri 4-axis (Y1, Y2, X, R) motorized backgauge for precise and fast positioning Cybelec CYBTTOUCH 15 2D CNC controller Monoblock welded steel frame ensures rigidity and durability Promecam quick-release tool clamping system for tool changes without downtime High-precision linear guides for consistently accurate bending FIESSLER AKAS front and rear laser safety system for safe operation Integrated standard tooling: 85° punch and Multi-V die along the full length LED lighting for optimal visual comfort Premium European hydraulic components by Höerbiger Motorized crowning for consistent bending across the entire length Two front sheet supports included Available options: High-precision hydraulic crowning Pneumatic or hydraulic tool clamping systems (compatible with your existing tooling) Motorized bending aids for easy handling of long or heavy parts Extended rear backgauge for oversized workpieces Rear backgauge with up to 6 or 8 axes for increased flexibility Wide lower table suitable for multi-V tooling Additional fingers for rear backgauge Offline programming interface for job preparation from a PC Full robotic automation for bending processes to maximize productivity Machine manufactured in Turkey. The machine can be viewed and tested by appointment at our facility in Bréal-sous-Montfort (35). We can also provide demonstration videos or organize a live video presentation to show the machine in operation. Feel free to contact us for any additional information. Price on request. Delivery, unloading, and commissioning available on request.

Condition: new, Year of construction: 2025, New machine immediately available Capacity: 1520 x 2.25 mm segment-split upper cheek rail -tool rest -Adjustment of the upper beam by hand lever left/right Ljdpfx Adeh S Uiroqeri