Used Cnc Tube Bending Machine for sale (87,166)

Year of construction: 2021, Operating hours: 0 h, Condition: new, Maximum tube bending capacity : 65 x 3 mm Maximum bendin Radius: 250 mm Minimum bending Radius: 100 mm Servo rotation, servo feeding, hydraulic bending 3D simulation feature Automatic bending feature by one foot touch Maximum tube length (4000 mm) 15” PC touch screen Able to see daily and total bending quantity Multiple language option Saving product to memory Able to use automatic or manual by PLC control system Maximum bending angle is 190° Bu9Xngwkrz 1 year warranty Automatic tube length calculation Able to see errors on the screen Security warning system Easy to use by simple interface Complies with CE norms

Year of construction: 2021, Operating hours: 0 h, Condition: new, Maximum bending capacity: 42 x 2 mm Maximum mold diameter: 250 mm Minimum mold diameter: 50 mm Direct product drawing transfer with step file Servo bending , feeding , rotation and dimensioning 3D simulation Easy to use by simple interface Bu9Xjuihbn Able to use 3 molds simultaneously Push bending feature Maximum bending angle is 190° Able to see errors on the screen Security warning system Limitless product saving to memory Tube bending handling length: (4000 mm) Windows 10 Multiple language option 1 year warranty Complies with CE norms

Condition: ready for operation (used), Year of construction: 2012, Operating hours: 31,325 h, Functionality: fully functional, Machine/vehicle number: 70836, Bending radius: 180 mm, Pipe diameter: 60 mm, TECHNICAL DETAILS Tube diameter: 20 - 60 mm Steel round tube: 60 x 6.0 mm Stainless steel round tube: 60 x 4.0 mm Square steel tube: 50 x 50 x 4 mm Stainless steel square tube: 60 x 40 x 2 mm Bending angle: up to 180 MACHINE DETAILS Connected load: 37 kW Supply voltage: 400 V Mains frequency: 50 Hz Ulzbrjm002 Back-up fuse: 80 A Operating pressure: 200 bar Equipment: Pipe bending machine + control cabinet + cable

Condition: new, Year of construction: 2024, Shaft diameter: 70 mm, CNC-controlled profile and tube bending machine for demanding and precise bending work with hollow profiles and tubes. Regardless of the material, our machines can bend aluminum - steel / stainless steel - various plastics such as PVC - window profiles (depending on the application) with repeat accuracy. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models in the REPANDUS series work with a fixed upper roller and two movable lower rollers - this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-damping cast steel Shaft diameter of the top and bottom rollers Ø 70 mm Shafts made of special steel - hardened and ground Bending force 190 kN Largest surmountable moment of resistance with standard rollers W = 35 cm³ Smallest possible bending radius with standard rollers 120 mm Roll speeds 1 to 15.6 rpm Drive power roller drive 4 kW Drive power hydraulic unit 4 kW Weight approx. 1050 kg Pzauz3Ojpv CNC control - High-end CNC control based on Windows® 10 with TFT color monitor. Our special software works with special algorithms for the control and regulation of three to five CNC axes in connection with profile and tube bending work. Automatic calculation of 150 roller speeds and 500 positioning speeds of the bottom rollers. Automatic work cycle The workpieces can be bent in one or more passes. Up to 36 different consecutive radii can be bent on one bar of material.

Condition: used, Year of construction: 1997, Functionality: fully functional, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C Dpiwnh BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Year of construction: 2017, Condition: excellent (used), Sheet metal bending rolling machine working length 3m CNC C0Wpqi0Ofg

Year of construction: 1994, Condition: excellent (used), Technical data: Special machine for the production of pipe coils hydraulically adjustable rollers bending moment: 50 cm/3 bending diameter: 500 - 3500 mm bending length: 3000 mm NC control: ROUNDO Dimensions (length x width): approx. 5500 x 1700 mm Weight: approx. 9,5 to accessories: various roller sets condition: the machine is in very good condition Hlg2Xewh The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Year of construction: 1998, Condition: reconditioned (used), Machine is in very good condition. Capacity, Ø mm / 90 x 5 radius, min./max. / 50/400 Cftuoqxs Bending Rate/Repeatability / 40º/s. ±0.1° Mandrel length 4 000 Weight, kg 10 000 Machine dimensions 6.7 x 1.7 x 1.8 Engine kW / 40 Length feed 900 mm/sec Tolerance degree 0.05-0.1°/mm Tools: 48.3-50-57-88.9mm

Condition: ready for operation (used), Year of construction: 2012, Operating hours: 31,325 h, Functionality: fully functional, Machine/vehicle number: 70836, Bending radius: 180 mm, Pipe diameter: 60 mm, TECHNICAL DETAILS Tube diameter: 20 - 60 mm Steel round tube: 60 x 6.0 mm Stainless steel round tube: 60 x 4.0 mm Square steel tube: 50 x 50 x 4 mm Stainless steel square tube: 60 x 40 x 2 mm Bending angle: up to 180 MACHINE DETAILS Connected load: 37 kW Supply voltage: 400 V Cyrgbccive Mains frequency: 50 Hz Back-up fuse: 80 A Operating pressure: 200 bar Equipment: Pipe bending machine + control cabinet + cable

Condition: refurbished (used), Year of construction: 2003, Operating hours: 24,000 h, Functionality: limited functionality, Bending radius: 300 mm, Bending angle: 183 °, Wall thickness: 8 mm, Pipe diameter: 100 mm, Pipe length: 4,100 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Ehnxv9O8 Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: repair required (used), Functionality: not functional, Manufacturer: Miic B7O8Evq023 The machine does not work. Program error! Voltage: 110 V !!!

Condition: good (used), Year of construction: 2011, Operating hours: 3,000 h, Functionality: fully functional, Overall weight: 1,500 kg, Automatic bending machine with PLC control for tank builders and metalworkers, hydraulic companies, Manufacturer: JUTEC CNC Model DL 5060 and DL 6000 Year of construction: 2011 the particularly economical bending machine for tight bending radii. The compact drive unit with the detachable dome carrier offers great advantages for the use of other bending systems (rollers and profile bending) The free-standing bending head can be quickly converted to right or left bending for complicated geometries. The plug-in bending tools enable a quick changeover to other tube dimensions. The optimized hydraulics for tube clamping and locking the tool significantly improve the bending quality. Automatic operation significantly reduces bending and non-productive times. The robust PLC control with password management and data memory can record 200 programs for the bending angle, length dimension and twisting angle for a maximum of 30 bending sequences on one tube length. 100 materials can be entered in the database to compensate for springback values. Operating errors are displayed directly on the large screen as full text. The hydraulic mandrel retraction is programmable and is automatically retracted in good time when the bending angle is reached. The sheet quality is thus optimally adjusted. Technical data: Bending capacity pipes from 6 - 50 mm Tube feed length either 5840 mm, can be extended up to 12,000 mm SPS control Target/actual angle display 0.1 degree Clamping pressure adjustment with display Electronic length and torsion measuring system 0.1 degree with large display on the control panel Mechanical four-jaw chuck 160 mmDrive power of bending axis 2.2 kWDrive power of hydraulic pump 3 KW Voltage 400 Volt Hu3Ppfg Mobile compact system on swivel castors with brakes Mobile control panel with large display dysplay Color RAL 5010 blue frequency converter Extension of the push-on length of the pipes for 12 m Foot switch Hydraulic collet chuck for safe and gentle pipe clamping, especially for large quantities. Non-productive times are significantly reduced compared to the manual four-jaw chuck. Operation is via foot switch with emergency stop. Please note that one collet chuck is required for each pipe diameter. Collet chuck SZ In addition, a large number of tools (15 tons) and the extendable mandrel to 12 m mandrel length 150 - 1400 mm diameter

Condition: good (used), Manufacturer: PBT Indumasch Type: 25 Control system: PC 300 SIEMENS TOUCH Year of construction: 2009 Torq each roll 600 Nm Pushing force 27 Ton Front roll adjustable 200 - 1000 mm Radius measuring device Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Horizontal Horizontal Stroke X axis 265 mm Flat capacity 120 x 15 x R = 2000 mm mm Tube capacity 114 x R = 2000 Ø x mm Ø x mm Capacity solid 60 x 60 x R = 1000 mm mm Working speed 1-24 rpm mm/min. Dimensions (estimate) length 1500 mm width 1200 mm height 1500 mm weight 1400 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Cccszw8

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar U2Mtwfgs87 hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Year of construction: 2004, Condition: used, Tube bending machine - Mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 K Series. No. 70173 Year of construction 2004 Bending capacity (steel) max. Ø 76.1 x 3.0 mm Bending capacity (stainless steel) max. Ø 76.1 x 1.65 mm Bmbbmuppg9W Bending tool max. Ø 70 x 2 mm (for stainless steel) Tube slide-on length 4572 mm (4300 mm) Bending radius max. 150 mm Bending direction clockwise (right) Bending angle max. 190° Bending head speed at 90° 8 sec. Hydraulic operating pressure 200 bar Motor power 3 KW Mains connection 400 Volt, 50 Hz, 15 Amp. - Electro-hydraulic drive - Control panel with electronic control for 8 bending arms (IPU-8) - 360° twisting angle unit on precisely guided longitudinal sliding carriage up to 4300 mm extension length - Precisely guided longitudinal sliding carriage with adjustable stops - Hydraulic mandrel extension - Mandrel lubrication via hand pump in the operating area - Crease smoother - 10 tool sets with 10 mandrel bars 1x tool set Ø 18 - R27 1x tool set Ø 28 - R42.5 1x tool set Ø 29 - R50 1x tool set Ø 30 - R45 1x tool set Ø 33.7 - R51 1x tool set Ø 41 - R61.5 1x tool set Ø 40 - R60 1x tool set Ø 52 - R78 1x tool set Ø 53 - R80 1x tool set Ø 70 - R105 - Stainless steel mandrel tray, tightly welded with oil drain (length 5880 mm x width 450 mm) Space requirement of the machine L x W x H 5900 x 800 x 1600 mm Weight complete approx. 1.8 tons good condition

Condition: ready for operation (used), 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Cccmfws Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: good (used), Machine/vehicle number: 6626, Rated power: 380 V Isweg0E

Condition: used, Year of construction: 2011, tube diameter: 60 mm wall strength: 3,0 mm bending radius min.: 20 mm Qcu2P tube diameter max.: 60 mm wall thickness max.: 3,0 mm tube pipe draw up length: 1500 mm bending angle max.: 180 + Auffederung ° Number of working hours: ca. 34 797 h Total power requirement: 55 kW Weight approx.: 8,0 t machine dimensions LxWxH: 6,3 x 3,3 x 1,9 m dimensions electric cabinet LxWxH: 2,7 x 0,7 x 2,0 m dimension device 1: Steuerpult: 0,9 x 0,6 x 1,85 m dimension device 2: Rohrmagazin: 1,8 x 2,4 x 1,75 m This is an automatic pipe cold bending machine. Multiple radii can be bent. Radius differences freely programmable via CNC control up to 6 levels. Pipe positioning device in NTB design Pipe diameter: min. Tube Ø : 16mm max. capacity of machine Tube Ø x wall thickness: mild steel=Ø 60x3 mm and stainless steel=Ø 57x2 mm Bending radius to pipe center: min. Ø 20 mm max. Ø 200 mm Bending to left. max. tensile strength of the material to be bent: Stainless steel 750 N/mm² mild steel 450 N/mm² max. bending speed: FORWARD, infinitely variable / programmable 22.0 1/min. RETURN, constant 22,0 1/min. Height adjustment multiple radii: lowest tube center 55 mm Height travel suitable for 3-groove bending tools Twisting: Twisting angle max. 360°; speed 50 min-1 -gripper -tube magazine Schwarze-Robitec, tube length min./max.: 400 7 1500 mm, tube outer Ø min./max.: 28 7 60 mm -Hydraulic filling volume 340 liters -Hydraulic operation for: bending table drive; tool clamping; slide rail pressure, direct acting; reinforced slide rail feed and return; mandrel return feed device -operator/control panel from Schwarze Robitec -2x foot contact operation -cooling unit on control cabinet Rital, type SK 3361100 accessories: div. bending tools for Ø 60 mm tube div. auxiliary tools

Condition: good (used), Profile bending machine Tauring - DELTA 50 CNC-S MACH-ID 8833 Manufacturer: Tauring Type: DELTA 50 CNC-S Control: TAURING CNC-S Year of construction: 1999 Max. roll diameter 175 mm Shaft length 115 mm 3 rolls driven Uj3Oq2Orqh Specifications Metric US Standard Horizontal and vertical H + V Axis Ø 50 mm Number of rollers 3 Stroke X axle 150 mm Resistance torque 17 CM³ Flat capacity 120 x 30 x R=300 mm Tube capacity 80 x 2 x R=1100 Ø x mm Capacity solid 50 x 50 x R=1000 mm T-profile capacity 80 x 80 x 10 x R=400 mm Working speed 0-8000 mm/min. Dimensions (estimate) length 1300 mm width 1400 mm height 1500 mm weight 800 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: refurbished (used), Year of construction: 2013, Operating hours: 21,600 h, Functionality: fully functional, Machine/vehicle number: 70892, Bending angle: 180 °, Total length: 5,500 mm, Total height: 1,500 mm, Total width: 1,800 mm, Overall weight: 7,400 kg, Pressure: 6 bar, Warranty duration: 6 months, Power: 35 kW (47.59 HP), Capacity: - Round tubing mild steel 88,9 x 5,0 mm Ø - Round tubing stainless steel 80 x 2,9 mm Ø - Square tubing mild steel 50 x 50 x 2,5 mm - Max. moment of resitance 26,2 cm³ (S235) - Bending angle up to 180° + 10° spring back - Speed of bending axis max. 50°/ sec. - Speed of front feed axis max. 1000 mm/sec. - Speed of rotation axis max. 180°/sec. - Accuracy of the bending axis +/- 0,1° - Accuracy of the length +/- 0,1 mm - Accuracy of the rotation +/- 0,1° - Arbor length/Usable length 3048 mm - Radii max. 225 mm - Bending height 1. bending level 1150 mm - Boosting force length positioning 20 kN - Power bending axis servo-electric - Automatic positioning of the rotation and length servo-electric - All other axes (e.g.clamping, mandrel, pressure die, etc.) electro-hydraulic - Material clamping (chuck) electro-hydraulic Machine equipment-/basic accessories: - Bending direction clockwise - With hollow shaft for using tooling for small radii - Minimum clamping length on the tube end, because of wide opening pressure die which allows the off set bend device to move directly behind the bending tool ->For each tube-Ø you need a separate collet - Chuck is equipped for use of standard norm collets - Footswitch to open or close the collet in the offset bend device, for easy loading and unloading - For a correct positioning of the mandrel the machine is equipped with a mandrel support - Automatic, programmable mandrel withdrawal Um2Kunyhk9 - Mandrel minimum quantity lubrication for automatic mandrel lubrication, adjustable lubricant quantity, can be used from inner tube Ø 13.5 mm - Central lubrication for lubrication of all moving parts in the necessary cycle - Air conditioning for the electrical carbinet - Starting of operation via manual switch on the control panel - In manual mode, all functions can be operated by keyboard and mouse - The machine is built according to the latest safety regulations. In order to comply with the CE guidelines, a safety barrier is required in addition (DB-SA...) - Standard norm electric and hydraulic equipment - Colour RAL 7047 grey, RAL 3020 red

Year of construction: 2004, Condition: used, Semi-automatic bending machine, tube bending machine, mandrel bending machine MOBITEC Type BAH 1-2 Cgeqgrdr KOTTMANN and BERGER GmbH make no. 056 year of construction 09/2004 - for simultaneous bending of two steel pipe sections up to Ø 12 mm bending angle max 90 tube diameter max 12mm mandrel length approx. 65 mm nominal power 3,5 kW Compressed air max. 6 bar / approx. 1 liter per bending cycle Mains connection 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STÖBER control box series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolts 25 x 183 mm - only 1 bending mandrel available (see pictures). space requirement L x W x H 1000 x 1000 x 1500 mm weight 390 kg good condition

Condition: new, Year of construction: 2024, tube bender R 1 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm Biloefk7Xp - weight 280 kg - motor 1,5 Kw - 220 volt single phase - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 50 mm - max. Bending angle of 210 °

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Sheet thickness steel (max.): 2 mm, Roller diameter: 80,400 mm, Working length: 1,000 mm, Pipe diameter: 80,400 mm, Equipment: Emergency Stop, Tube bending and welding machine with CO2 laser (3200W), for the production of round and oval, longitudinally welded tubes. Diameter from 80-400mm, length from 80-1000mm, material thickness (steel + stainless steel) 0,5-2,0mm. The machines are currently located in Bursa (Turkey). The identical machines can also be viewed at the German site. E2Pqmiu Further technical data can be found in the attachments.

Condition: used, Year of construction: 2007, Used machine in good condition. Available for immediate delivery. - Pressure force: 130 t - Bending length: 3.230 mm - Axes: 4 - Distance between uprights: 2.690 mm Ujhbcle0Kh - Working speed: 10 mm/seg - Throat: 420 mm - Control: TRUMPF TASC 6000 - Power: installed max: 28 kW - Dimensions (long x wide x high): 3.980 x 1.740 x 2.835 mm - Weight: 10.900 kg

Condition: good (used), Stock number: 2878 Manufacturer: Tracto Technik Paul Schmidt Year of construction: Type: Mini pipe bender TUBOFORM Machine number: 1841091 Urazv3G7Ed Pipe diameter: up to 16 mm Maximum bending angle: 180 Bending radius: 2 x D Equipment: digital bending angle display Accessories: various bending tools between 5 and 16 mm diameter Drive: 0.75 kW 220 V Dimensions: 2,400 x 700 x 1,000 mm Weight: approx. 0.4 t