Used Trimming for sale (1,997)

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Pedegyg Aropfx Aa Eerf -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Year of construction: 1999, condition: refurbished (used), USNR Euromill trim saw, year of manufacture 1999. Sawing and profiling in one machine! Machine completely overhauled, new saw arbors installed. Maximum cutting height: 175 mm. Maximum cutting width: 200 mm (minimum 50 mm x 50 mm). Drive power: 2 x 110 kW. Complete with USNR infeed system and hydraulic unit. Various tools, saw blades, cutters, and spacer rings included. Prsdpsxcp E Esfx Aa Eof

Condition: good (used), Further information available upon request. Podpfjwkr Hdex Aa Ejrf

Condition: good (used), Year of construction: 1987, functionality: fully functional, Besaumer Paul Kme 2/750 Left, fully hydraulic, 22 kW, with electrical system Podsxq Hlrepfx Aa Ejrf

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm passage width • Saw shaft newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing Prsdpew Slwkofx Aa Eef • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw shaft diameter • Mechanical height adjustment of upper rollers • Vibratory chute in the machine • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop inspected • Machine newly painted • Approx. 5 m long roller table in front of the saw • Approx. 4 m long roller table after the saw

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Podpfx Ajxdr Swoa Ejrf Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available.

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Prjdpfogy Dbwox Aa Eef -Manufacturer: Hemag, saw unit can be swiveled by 30 ° -Saw blade: max. Ø 350 x 30 mm -Motor: Perske type DKNS 120/2 3.0 kW / 2830 rpm -Protection class: IP 54 -Dimensions: 950/780 / H630 mm -Weight: 115 kg

Year of construction: 1995, condition: refurbished (used), Trimming saw – edging saw MEM Cobra Year of manufacture: approx. 1995 Max. cutting height: 120 mm, max. pass-through width: 1,070 mm. Prsdpfxjxcp A De Aa Ejf 4 variable axes. 2 x 55 kW saw drive power. Completely overhauled machine! System immediately available for takeover!

Condition: used, Year of construction: 1965, functionality: fully functional, machine/vehicle number: M02L/6992, Offer Number: M02L/6992 Machinetype: trimming machine Make: HILGELAND Type: ME2SP Constr. year: 1965 diameter range: 2,6-8 mm shaft length under head: 6-50 mm output pieces/min: 260 Psdpfxewi Tais Aa Esrf Location: In our warehouse

Year of construction: 1985, condition: excellent (used), functionality: fully functional, Manufactured by Voronezh plant (Russia) Year of manufacture 1985 Capacity, ton 1600 Slider stroke, mm 400 Strokes per minute 16 Table size, mm 1600 x 1600 Ram dimensions, mm 1600 x 1600 Slider adjustment, mm 220 Max distance between table and slider, mm 870 Slider ejector capacity, ton 80 Prsdpfx Aasxwd Iwj Eof Slider ejector stroke, mm 100 Table cushion capacity (clamping), ton 250 Table cushion ejector capacity, ton 25 Motor capacity, kW 110 Press dimensions, mm 4670 x 4370 x 8110 Press weight, kg 141500

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 750 mm passage width • 125 mm cutting height Podpfewt N N Uox Aa Ejrf • 18.5 kW saw motor • Mechanical quick width adjustment • Saw shaft newly mounted • 1 fixed bushing • 1 adjustable bushing • 50 mm saw shaft • Manual upper roller height adjustment • 2 used saw blades • Stepless feed speed 0–50 m/min • Machine workshop inspected

Condition: excellent (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, cutting height (max.): 160 mm, height adjustment type: hydraulic, Technical Description – Double Edger PAUL KME-750-L (Year of Manufacture 2012) The machine offered is a double edger of the type PAUL KMEZ-750-L, year of manufacture 2012. The machine is in good condition and ready for immediate use. It is ideally suited for precise edging of wood in industrial applications. Technical Data: • Machine No.: 12242770 • Year of manufacture: 2012 • Net weight: approx. 1,500 kg Drive & Electrical: • Connected load: 38 kW • Supply voltage: 400 V / 50 Hz • Rated current: 71 A • Circuit protection: 80 A • Control voltage: 24 V DC Saw technology: • Saw blade speed (min/max): 250 / 380 rpm • Bore diameter: 75 mm • Saw motor speed: 3,200 rpm Hydraulics & Pneumatics: • Hydraulic pressure: 60 bar • Pneumatic pressure: 6 bar Prsdoxpua Uspfx Aa Ejf Equipment: • Infeed rollers for easy material feeding • Integrated alignment scanners for automatic positioning • Batten sleeve • Waste block separator • Outfeed table for orderly material discharge This high-quality machine from PAUL is designed for continuous use in industrial wood processing and is equipped with practical additional features that enable efficient workflow.

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Prjdpfsgy T I Tox Aa Esf -Manufacturer: Homag, trimming unit from edge banding machine BRANDT KM 35 -Motor: Homag type LF-40-L -Power: 0.27 kW / 12000 rpm -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Pneumatic components: Bosch -Individual components: see photos -Dimensions: 500/370 / H680 mm -Weight: 26 kg

Condition: excellent (used), cutting width (max.): 700 mm, cutting height (max.): 120 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min Prjdpfx Aajv Raqxj Esf 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Infeed table with individual trestles Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M02L/7647, Offer Number: M02L/7647 Prsdpfx Aowi S Sdoa Eef Machinetype: trimming machine Make: HILGELAND Type: ME2VSP Constr. year: 1977 diameter range: M8 shaft length under head: 6-80 mm output pieces/min: 200 Location: In our warehouse

Condition: new, Deburring machine Predpsb E Dc Hsfx Aa Ejf Make: Assfalg Model: FS 5 Condition: new machine Speed: 2,800 rpm Max. chamfer width: 3 mm Equipped as standard with: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating instructions

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -1x engines Perske -Motor type: -Power: 0.75 kW -Voltage: volts -Frequency: 300 Hz -Speed: 8,600 rpm Predpfx Ajb Sc Svea Ejf -Other engines with other services in stock for an additional charge -Dimensions: 990/620/H340 mm -Weight: 52 kg

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M02L/7787, Offer Number: M02L/7787 Machinetype: trimming machine Make: HILGELAND Type: ME2VM Constr. year: 1983 diameter range: 2,2-8 mm shaft length under head: 6-40 mm Predjwi S Ryjpfx Aa Esf output pieces/min: 250 Location: In our warehouse

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, trimming units from the BRANDT KM 36 edge banding machine -Motors: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220V / 200 Hz -Pneumatic components: Bosch Prjdpfogy Da Sex Aa Eof -Individual components: see photos -Price / fee: complete -Dimensions: 500/560 / H670 mm -Weight: 51 kg

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M02L/8406, Offer Number: M02L/8406 Machinetype: trimming machine Make: HILGELAND Pedpfx Aowi S Avoa Ejrf Type: ME4SP Constr. year: 1978 diameter range: 5-12 mm shaft length under head: 10-130 mm output - pieces/min: 120 Location: In our warehouse

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -1x engines Perske -Motor type: -Power: 0.75 kW -Voltage: volts -Frequency: 300 Hz -Speed: 8,600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 940/620/H350 mm -Weight: 54 kg Pedpfob Sgzasx Aa Esrf

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x engines Perske -Motor type: -Power: 0.22 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1240/600/H1100 mm Psdpfxob Sab He Aa Esrf -Weight: 296 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, trimming unit from edge banding machine BRANDT KM 35 Prjdpegy T Nmefx Aa Esf -Motor: Homag type LF-40-L -Power: 0.27 kW / 12000 rpm -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Individual components: see photos -Dimensions: 590/280 / H750 mm -Weight: 27 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts Predpfx Asb Uhpwea Ejf -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1000/420/H655 mm -Weight: 140 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Prsdpfx Aajb Uhrts Ejf -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1020/400/H700 mm -Weight: 110 kg