Used Paul for sale (38)

Condition: used, Two roller conveyors from Paul, suitable for the sub-table crosscut saw AO or similar machines. Roller conveyor length 1: 340 cm Roller conveyor length 2: 190 cm Nwjdoyarm Uopfx Amnog Roller width: 56 cm

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Nwodpfx Aeyx Exvemnog

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Nwjdet E Nw Tepfx Amnsg Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Original PAUL saw bushings with effective clamping lengths of 55 mm and 110 mm for the KME 2 and BM Nwsdpfxjiimz Ae Amnsg Original PAUL spacer rings in various widths for S 900 re-cutting saw, outside-Ø 150 mm, bore-Ø 110 mm, with 2 keyways

Condition: excellent (used), Catalogue number 7386 Nwedpfxey Tkguo Amneg TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: excellent (used), functionality: fully functional, working width: -700 mm, stack height: -50 mm, type of input current: AC, input voltage: 220 V, We are offering this very well-maintained Paul Schall DM-56-2 bookbinding machine, year of manufacture unknown. Title: Paper drilling machine Paul Schall DM-56-2 – 2-spindle table model Description: Paper drilling machine Paul Schall, type DM-56-2, for sale. • 2-spindle paper drilling machine • Table model • Voltage: 220 / 380 volts • Power: 0.45 kW • Speed: 2800 rpm • Machine no.: 5670133 • Robust, old industrial quality • Good condition, fully functional Ideal for printing companies, bookbinding businesses, or copy shops. Inspection possible. Price: 550,-- EUR (negotiable) Nwsdpjytv Trofx Amnog Used paper drilling machine Paul Schall DM-56-2, 2 spindles, in working condition. If you have any questions or require further information, please send us a message or call us. 10 machines available – a very good overall price will be offered to anyone who buys them all. Quick transaction preferred!

Condition: ready for operation (used), Year of construction: 2021, cutting length (max.): 2,700 mm, workpiece width (max.): 110 mm, Optimizing Cross-Cut Saw manufactured in 2021. This Paul Reinhardt SlimLine 110 features automatic cutting capabilities, accommodating wood lengths from 300 to 3000 mm and widths from 30 to 350 mm. It is designed for various wood types, including MDF and solid wood, with a maximum cross-section of 58 x 125 mm. If you are looking to get high-quality cutting capabilities, consider the Paul Reinhardt SlimLine 110 machine we have for sale. Contact us for further details. • Condition: Not rebuilt – sold without warranty • Cutting direction: right to left • Wood types: MDF, particleboard, solid wood, Kerto, plywood • Workpiece dimensions: • Length: 300–3000 mm • Width: 30–350 mm • Minimum cross-section: 15 x 30 mm • Maximum cross-section: 58 x 125 mm • Processing: automatic cutting • Working height: 900 mm • Electrical supply: 400 V / 50 Hz / 3 Ph Nodey Dru Ujpfx Amnswg • Main motor: 5.5 kW (400 VΔ / 690 VY, 50 Hz) • Control: Electronic control with Windows 10 and Beckhoff TwinCAT • Optimization: Full optimization without error cutting Additional equipment • Feeding with 3 buffer stations (infeed buffering/automation) • Software/add-ons: • Backlog monitoring • PALETTI Process Viewer • PALETTI Office

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Nwsdpfxjyzr Tfo Amnog Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; Nedpsirmuljfx Amnswg 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Nwjdjuqdwxspfx Amnog Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: new, New spacer rings for PAUL KME 2 and BM, with bore diameter 75 mm, outer diameter 120 mm, in widths 41, 30, 26, 22, 20 and 10 mm, new spacer rings for PAUL K2V, with bore diameter 60 mm, outer diameter 90 mm, in widths 40, 30, 20, 10, 2 and 1 mm, Saw bushings for saw shafts with diameters of 60 mm, 50 mm, 45 mm and 40 mm, new hard-chromed CV saw blades in various diameters for KME 2, BM and K2V Nwodpfx Amjh Anyfenog

Condition: used, machine/vehicle number: 008441, Max. panel width: 1100 mm Max. panel length: 5700 mm Nwodpfsyz Slbjx Amnjg Max forward speed: 30 mt/min Number of shafts: 2 Motor Power: 90 KW

Condition: used, Year of construction: 1992, saw blade diameter: 550 mm, overall weight: 1,500 kg, power: 13 kW (17.68 HP), No. 3260 CNC cross-cut system Paul 14KE Used, year of construction 1992 (overhauled by the manufacturer in 2012) According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Saw blade diameter 550 mm Speed 3500 rpm Bore 120 mm Connected load 13 kW Workpiece length 600 - 7000 mm Workpiece width maximum 380 mm Workpiece thickness maximum 100 mm Wood cross-section minimum 12 x 40 mm Wood cross-section maximum 45 x 380 / 100 x 200 mm 6 driven bottom rollers 6 non-driven top rollers CNC control MAXI x.3 Complete with infeed, outfeed conveyor, switch cabinet and control Technical documentation available Weight approx. 1500 kg Sale on behalf of customer, ex location near 99091 Erfurt, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price Nwodpfxjyl R Uuo Amnsg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 1960, condition: used, Folding stoving machine Nsdpfxobq Swge Amnowg Standard

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm pass-through width • Saw spindle newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw spindle diameter • Mechanical height adjustment of top rollers Nwedpfx Amsyudquenog • Integrated chip removal conveyor belt • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop-inspected • Machine newly painted • Hydraulic width adjustment •

Condition: good (used), 15 kW motor Cutting height 8 cm Cutting width 40 cm Roller length 4 m x 2 Working width of rollers 43 cm Njdpfx Aeyzxfuomnewg

Condition: good (used), Year of construction: 2014, Year of manufacture 2014, 700 bar 400V 32A 7.5 kW Nsdpjkytdgofx Amnowg without control bottle several units available

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 89 mm, cutting width (max.): 200 mm, Optimizing cross-cut saw PAUL C11 MKL Year of manufacture: 2014 The machine is equipped with a measuring station and 5 ejectors. Technical specifications: Cutting height: 3 - 89 mm Width: 30 - 200 mm Minimum workpiece length: 300 mm Saw blade diameter: 500 mm Saw motor power: 5.5 kW Nwedpfxjx H Uaxj Amneg

Condition: excellent (used), Paul KME 2/1000R Passage/working width: 1000 mm Cutting height: Up to approx. 120–125 mm. Motor power: 18.5 kW Cutting system: movable saw (saw sleeves), computer controlled Nwjdsyxmlkspfx Amneg Feed: Infinitely variable feed adjustment Hydraulic adjustment of the upper roller height.

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Nwjdpfx Ametrpiieneg Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Year of construction: 2003, condition: used, Paul AB 920 feed table Nwodpfjiauhzjx Amneg

Year of construction: 1993, condition: used, - working width (mm): 2200 Nodsn I Twyopfx Amnowg - engine power (kW): 22 - top rollers: with PU rings - bottom rollers: knurled - Saw shaft: included

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Nsdpfx Ajt Amc Ijmnjwg

Condition: reconditioned (used), - Paul cross-cut saw 17 AP - pneumatic saw stroke - 150 mm cutting height Nwodpfx Amsvkfuienog - 400 mm max. cutting width - 2 non-driven roller tables, each 2,000 mm long

Condition: reconditioned (used), - Paul crosscut saw 15 AO - hydraulic saw stroke - 150 mm cutting height Nwsdpew Slgfofx Amnog - 500 mm max. cutting width - 1 non-driven roller conveyor approx. 1,600 mm long