Used Paul Edger for sale (49)

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Dcsdeiimz Aepfx Ahuop

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR Dcjdpfx Asia Nypohujp - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: like new (used), ffor PAUL KME 2 or BM edger and multirip saw, overall length 420 mm, 160 mm or 105 mm, clamping length 375 mm, 110 mm or 55 mm, bore Ø 60 mm, outer Ø 75 mm, flange Ø 120 mm, 2 external wedges, saw bushes with left-hand thread or right-hand thread available Dedpjpky Aasfx Ahujcp

Year of construction: 2003, condition: used, Paul AB 920 feed table Dsdpjiauhzjfx Ahuocp

Condition: used, tank capacity: 1,969 l, GENERAL INFORMATION Design: Suspended Remarks: 2 lugs made of V2A stainless steel (support surface reversed; see photos) Speed: 571 rpm Internal diameter: 1,000 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,800 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. excess pressure: 3.2 bar Top cover: bolted lid Mechanical seal: Mechanical seal without thermosiphon vessel Agitator type: Propeller Support type: Lugs Location: Bremen Technical documentation: Drawing available Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,969 liters Double jacket volume: 70.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 2,110 mm Previous application: Pharmaceutical chemicals Dcsdpfx Asxqa Sljhusp VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Outlet: Flange DN80 Note: slight residues MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric in top cover Agitator equipment: Technical documentation for agitator available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.7 mm

Condition: used, Year of construction: 2002, Type: Leak Detection Station Manufacturer: Paul Koster Year of Manufacture: 2002 Dedpfx Ahjxuft Neujcp Serial Number: 4012448 Condition: Used Quantity: 1

Condition: excellent (used), Original PAUL roller tables in various widths and lengths, in standard or heavy-duty design for use in front of cross-cut, trimming and resawing circular saws, short work tables enable, for example, entry for transfer from the cross conveyor, passage through the table system or forklift loading of heavy beams or models, long work tables in various dimensions are also available Djdjtv U Igspfx Ahujcp

Condition: refurbished (used), Model 11 completely overhauled Description: CNC cross-cut system Paul MKL or K or KE as desired Manufacturer: Paul Year of manufacture: General overhauled with newest technology Condition: As good as new Technical data: Cutting width 150 mm Cutting height 85 mm Saw blade diameter:450 mm Saw motor 5,5KW Input length as required CNC Maxi 5 control with optimization Dedpfxob Rl I Hj Ahuecp Sorting belt as desired Machine would be completely overhauled, all bearings new motors new with latest eff Class, new control, new swingarm.

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Dedpfeuqdwxsx Ahuocp Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade Dcedpfx Ahot E Silsuop – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: refurbished (used), Year of construction: 1972, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 6619, Classic heavy-duty through-feed press featuring modern control technology with a uniquely large press bed Dcsdpoxgfgajfx Ahujp Specifications • Brand: Paul Ott • Type: Through-feed press • Year of manufacture: 1972 • Press bed dimensions: 2300 mm x 3600 mm • Infeed and outfeed table dimensions: 3900x2560 mm • Maximum stroke: 140 mm • Number of cylinders: 8 • Pressing force: > 100 bar • Connected load: 380V • Control system: Siemens PLC • Heating: Top and bottom plates hydraulically heated • Infeed and outfeed: Fully automated or manual • Condition: Completely overhauled in 2020 and ready for operation This robust through-feed press has been thoroughly overhauled, both hydraulically and mechanically, and is equipped with a modern Siemens control system. It combines classic durability with contemporary automation technology, making it ideal for industrial applications requiring reliability and flexibility. Further information: • The machine can be viewed in operation at our site in Tilburg • Overhaul and maintenance reports available for inspection • Transport and installation can be arranged by agreement

Condition: used, Year of construction: 2019, • Type: Assembly System for Rubber Bearings • Model: AMG HAT X290 Hybrid + E-Class (Station 314) • Year of Manufacture: 2019 • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V • Power Rating: 22 kVA • Control System: Siemens SIMATIC HMI with touchscreen interface Djdpfx Ahoxufqbjuscp • Integrated Lubrication System: microjet GmbH Minimal Quantity Lubrication System • Included Equipment: – Complete control and drive system – Various hydraulic and mechanical joining units – Tooling and fixture sets for different bearing types – Pneumatic control unit with multiple valve blocks – Worktable and component storage rack

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Dcsdpfxeh Anyfe Ahujp

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Feed by means of rollers, 6 pieces top, 6 pieces bottom CNC control Maxi 8.0 Dcodper A Et Tjfx Ahusp 1 X sorting unit per 11.5 m Machine is set up according to your wishes

Condition: reconditioned (used), - Paul cross-cut saw 17 AP Dodpfevkfuiox Ahuocp - pneumatic saw stroke - 150 mm cutting height - 400 mm max. cutting width - 2 non-driven roller tables, each 2,000 mm long

Condition: used, Year of construction: 1965, pressure 250 t throat 450 mm Dodpjw In Dfofx Ahuecp stroke 20 - 140 mm table-size 1210 x 850 mm no. of strokes 35 Hub/min ram adjustment 80 mm ram surface 750 x 320 mm table pass 400 x 250 mm total power requirement 200 HP weight of the machine ca. 16,8 t dimensions of the machine ca. 2,8 x 1,7 x 3,0 m

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Dsdstrpiiepfx Ahuecp Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: excellent (used), Year of construction: 2020, functionality: unexamined, This leak test system consists of three double leak detection stations. Each station is equipped with its own hydraulic unit. Two stations share one of two control cabinets, while one station has its own dedicated control cabinet. The machine/system does not include any product-specific tools, fixtures, or grippers (robots). Djdpoxtbl Ssfx Ahuocp

Condition: like new (used), New spacer rings for PAUL K2V, with 60 mm bore, outer diameter 90 mm, in widths of 40, 30, 20, 10, 2 and 1 mm For saw shaft diameter 45 mm: Fixed saw bushes with 55, 110, 230, 300 mm effective clamping length and sliding bushes with 55 and 110 mm effective clamping length For saw shaft Ø 40 mm: 2 fixed saw bushes with 55 mm effective clamping length Dcsdpfx Ahjxcvnysusp

Year of construction: 2002, condition: good (used), Min. inlet length: 500 mm, max. 5.5 m. Cross section: max. 85 X 150 Motor: 5,5 kW Sawing stroke servo rocker Feed by rollers, 5 pieces on top, 5 pieces on bottom CNC control Maxi 4.0 Djdpfobg Svhjx Ahujcp 1 X sorting each 11,5 m year of manufacture 2002

Condition: good (used), Year of construction: 1987, functionality: fully functional, Besaumer Paul Kme 2/750 Left, fully hydraulic, 22 kW, with electrical system Dodpfjxq Hlrex Ahuecp

Condition: excellent (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, cutting height (max.): 160 mm, height adjustment type: hydraulic, Technical Description – Double Edger PAUL KME-750-L (Year of Manufacture 2012) The machine offered is a double edger of the type PAUL KMEZ-750-L, year of manufacture 2012. The machine is in good condition and ready for immediate use. It is ideally suited for precise edging of wood in industrial applications. Technical Data: • Machine No.: 12242770 • Year of manufacture: 2012 • Net weight: approx. 1,500 kg Drive & Electrical: • Connected load: 38 kW • Supply voltage: 400 V / 50 Hz • Rated current: 71 A • Circuit protection: 80 A • Control voltage: 24 V DC Saw technology: Dedpfxsxpua Ue Ahuocp • Saw blade speed (min/max): 250 / 380 rpm • Bore diameter: 75 mm • Saw motor speed: 3,200 rpm Hydraulics & Pneumatics: • Hydraulic pressure: 60 bar • Pneumatic pressure: 6 bar Equipment: • Infeed rollers for easy material feeding • Integrated alignment scanners for automatic positioning • Batten sleeve • Waste block separator • Outfeed table for orderly material discharge This high-quality machine from PAUL is designed for continuous use in industrial wood processing and is equipped with practical additional features that enable efficient workflow.

Condition: not inspected (used), functionality: unexamined, MULTIPLE CIRCULAR SAW PAUL K 34G/1500 OCCASION TECHNICAL FEATURES: - DRAGGING SYSTEM RUBBERIZED ROLLERS. - USEFUL DRAG WIDTH OF 1.500 MM. - MAIN ENGINE POWER 37 KW (50 Cv) - ELECTRONIC VARIATOR REDUCER MOTOR OF DRAGGING 3 HP AND 2-48 M/MIN Dodpfx Ahsuryrnjuecp - MAXIMUM SAW DIAMETER 300 MM - CUTTING HEIGHT MAX 100 MM

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump Dedpeirmulsfx Ahuecp

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Dcsdpjh D Rt Ajfx Ahuep