Used Trimming for sale (2,004)

Condition: new, Deburring machine Make: Assfalg Model: FS 5 Condition: new machine Speed: 2,800 rpm Max. chamfer width: 3 mm Equipped as standard with: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts Giodpfsb E Dc Hsx Afnjn - Chip drawer - Operating instructions

Condition: good (used), Year of construction: 1987, max. cutting length 5200 mm Giedpfx Afsv D Nqujnjn max. cutting width 450 mm mac. cutting height 150 mm

Condition: as good as new (ex-display), Durkopp adler -3-TRANSPORT -1 NEEDLE WITH TRIM-KNIFE Gjdpfx Afjhc Nbfonsin -THREAD TRIMMER

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9665, Equipment: freezer, Airproducts Cryo Trim S3 (800) (year 1992/refurbished 2018); serial no. 9665 Gjdpfxjx A Sito Afnein - cleaning of frozen parts by blasting with plastic granulate (greater than 2 mm³ – CG 45 granulate or larger) - machine dimensions: height approx. 3.4 m, length (open or closed—does not change due to conveyor belt) approx. 4.1 m, machine width = conveyor belt approx. 2.8 m

Condition: good (used), Year of construction: 1991, rip saw with 6.2 m cutting length max. cutting height 170 mm max. cutting width 600 mm with laser electr. width adjustment immediately ready for use Giodpfx Ajut Rbvsfnjn

Condition: used, Trimming Saw / Edging Line / Twin Edger with Automatic Scanning and Adjustment consisting of: Board Infeed: * Roof chain cross conveyor (behind the frame saw roller table) * Transfer table to S-conveyor * S-conveyor Cant Infeed: * Vertical lift * Roller conveyor * Lowerable cross conveyor Trimming Machine: * Infeed table / cross-cutting table * Optimes automatic edger infeed table with 4-sided scanning system * Esterer BNK circular saw for trimming * 2-strip slat separator * Outfeed table (main product to the right, side boards to the left) Technical data – Optimes BNK: Gijdpfew Dn Ecex Afnsn 3 saw blades adjustable Cutting height: 160 mm Max. board length: 8 m Motor power: 2 x 90 kW Year of manufacture: 1987 The trimming line is located in Germany, between Augsburg and Stuttgart, in a smaller sawmill with an annual cutting volume of approx. 15,000 solid cubic meters. Maintenance and servicing have always been carried out properly. Adjustment shafts, infeed table + chains, gears, two drive motors, and the drive chains have all been completely replaced or renewed. Inspection during ongoing operation is possible at any time.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available. Giedpfjxdr Swex Afnjn

Condition: used, Hydraulic cutter for Rifile and similar 49cm roller Maximum height of the piece cm. 25 Gedpfx Afjuk I Ubenein complete with loading roller conveyor

Condition: good (used), Further information available upon request. Gijdewkr Hdjpfx Afnen

Condition: used, Year of construction: 2014, machine/vehicle number: 201409V, SECOND-HAND SEMIAUTOMATIC TRIMMING MACHINE FOR STRAIGHT AND SHAPED PANELS MOD. VSR FRAVOL - CE RULES Giodpjwr Uhyjfx Afnjn - KW 1,5 - Volt. 230/50 - Matr. 201409V - Year 2014

Year of construction: 1985, condition: excellent (used), functionality: fully functional, Manufactured by Voronezh plant (Russia) Year of manufacture 1985 Capacity, ton 1600 Slider stroke, mm 400 Strokes per minute 16 Table size, mm 1600 x 1600 Ram dimensions, mm 1600 x 1600 Slider adjustment, mm 220 Max distance between table and slider, mm 870 Slider ejector capacity, ton 80 Slider ejector stroke, mm 100 Table cushion capacity (clamping), ton 250 Gisdpfxsxwd Iwo Afnen Table cushion ejector capacity, ton 25 Motor capacity, kW 110 Press dimensions, mm 4670 x 4370 x 8110 Press weight, kg 141500

Year of construction: 1993, condition: used, functionality: fully functional, Complete Möhringer MN 180/200 resaw line. Cutting height 180 mm. 4 adjustable saws. With infeed/outfeed. Used. Already dismantled. Good condition. Sale on behalf of customer. Godpfx Afjxcidnonjin

Condition: excellent (used), Year of construction: 1989, Pinheiro SFM1-900 Gsdpfx Afjtwrqbjnoin - Wheel diameter 900 mm - Motor 11 kW - Height of the feeding wheel 24 cm - Belt length from 620 to 645 cm

Year of construction: 2025, condition: new, KDT-03 Trimming Machine 380V Grooving machine – 380V powered electric grooving machine, equipped with a foot pedal with an emergency switch, has a retractable lower shaft. Includes 6 sets stones shown in the picture. Easy and convenient machine operation. Technical specifications Gisdpfxefwmvho Afnon Range of processed sheet metal: 1.2 mm Roller diameter: 62mm Dimensions length height: 900x450x1350 (mm) Weight: 135kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Automatic edger line Söderhamn (Kockums) Edger 511-A Built approximately 1975-1980, or 2000 With complete 6.2 m x 1.5 m infeed conveyor with automatic centering and motorized feed. Board width continuously adjustable. Feed speed 77-118 m/min Gjdpfx Afjuq N Agsnjin Minimum edger width 75 mm Maximum edger width 350 mm Maximum wood thickness 125 mm Fixed saw blade 6 feed grooves Saw spindle speed 1800 rpm Maximum saw blade diameter 650 mm Weight with motor and control station 2050 kg

Condition: excellent (used), Year of construction: 1982, total height: 5,600 mm, pressing force: 400 t, air pressure: 6 bar, distance between side stands: 650 mm, distance between stands: 1,600 mm, stroke length: 280 mm, table length: 1,600 mm, table width: 1,120 mm, Trimming press in working condition: Nominal force: 400 ton Stroke: 280 mm Number of strokes per minute: 36 1/min Table size: 1 600 x 1 120 mm Gsdpfxsubyrxj Afnoin Slide size: 1 435 x 960 mm Main electric motor: 37 kW Overall dimensions: - Length: 3 010 mm - Width: 2 135 mm - Height: 5 600 mm Total weight: 50 000 kg.

Condition: good (used), Year of construction: 1978, functionality: fully functional, Hot forging hammer 5 ton Kramatorsk type M2147 Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Max. number of strokes per minute: 50 Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Upper anvil weight: 77 t Total weight 140 t + Trimming press Voronez type K9538 Capacity, ton: 630 Stroke 400 mm Table size (left to right) 1250 mm Gijdpfslnlq Dex Afnjn Table size (front to back) 1250 mm Ram adjustment 180 mm Strokes 20/15 min-1 Shut height 750 mm Upper ejector: power 20 t, stroke 125 mm Driving power 32 kW Driving power overall 58 kW Required space 3280 x 3470 mm Height of machine above floor 6190 mm Total weight 53 ton

Condition: excellent (used), Year of construction: 1985, ram adjustment: 200 mm, total height: 6,300 mm, table width: 1,320 mm, table length: 1,000 mm, stroke length: 400 mm, distance between stands: 1,000 mm, power: 38 kW (51.67 HP), Trimming press 400 ton force ERFURT, Germany type PKZ 400. Giodolnlpxspfx Afnjn

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Godpfjwu Sptsx Afnsin Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: used, Year of construction: 2004, Three knife trimmer Kolbus HD 142.P Year 2004 Description: - Co-Pilot with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Exchangeable cutting tables (standard set) - Knife pre-setting device Gijdpfxjwnbv As Afnen - Set of knife holders: 2 - Sets of knives: 2 Kolbus: HD 142.P Maximum size (cutted): 305 x 420 x 80 mm (WxHxT) Minimum size (cutted): 100 x 100 x 2 mm (WxHxT) Maximum size (uncutted): 310 x 430 x 80 mm (WxHxT) Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), SDD Square Fold Module SFM 0704 + 2 Side Booklet Trimmer BLT 0202 Perfect condition , low meter ! Giedjfybf Aspfx Afnsn As an experienced retailer of second hand copiers, we have developed a real expertise in packing and pallet shipping, to guarantee our customers machines in perfect condition upon receipt. We ship copiers coming from, and maintained by Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers, and handle world-wide deliveries on request.

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 150.B Gjdpfx Aevf Dtyofnjin Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Condition: ready for operation (used), Size max 315 x 410 mm Size trimmed max 300 x 380 mm Size trimmed 50 x 80 mm Speed max 1.080 c/h Godpfx Afsyi Szwenjin Feeding height 100 mm Table height 900 mm Clamping pressure min 500 daN Clamping pressure 2.000 daN Power requirements 2,2 kW (220/380V, 50Hz) Width 1.370 mm Depth 2.100 mm Height 1.550 mm Weight 1.880 kg (approx.)

Condition: ready for operation (used), Screening machine Triman 18/30-4 Brand: Triman Surface:  length 3000 mm, width 1800 mm – 4 Decks Driving: 4 pieces vibration motors of each 3,2 kW Gjdpfxevtvppo Afnein Screen opening: [] 10-6-4-2 mm Capacity: 0-2 mm 55 t/h Incl.: Steel Construction and Vibrating Chute.

Condition: used, Technical details: height over floor: 930 mm machine weight approx.: 75 +( 27kg Untergestell) kg dimensions L x W x H: 0,6 x 0,48 x 0,43 m EDGE CHAMFERING MILLING MACHINE Gijdpfx Aju Ngdtjfnon Application: For chamfering Machine table: WxD: 600 x 240mm with limit stop bar LxH: 400 x 25mm built-in tool: cutter approx. 50mm with 45° milling form Chamfering width approx. 6mm voltage: 380 V with ON/OFF switch *