Used Traveller for sale (9,719)

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~5.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder. Ljdpfxog Dghce Afkjaf

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Ledpfexcgtgjx Afkoaf Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: excellent (used), Year of construction: 2009, x-travel 6000 mm y-travel 2100 mm z-travel 1500 mm control HEIDENHAIN iTNC 530 feed 2- 20 m/min spindle turning speed range 20 -4000 U/min table dimension - longitudinal 7000 mm table dimension - cross 2000 mm total power requirement 79 kW weight of the machine ca. 55 t dimensions of the machine ca. 15 x 7 x 4,6 m The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) Laodpfxsvwgl As Afkof - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min

Condition: used, Year of construction: 2008, machine/vehicle number: 220028, CNC control: HEIDENHAIN iTNC 530, travel ranges: X-axis 4300 mm, Y-axis 1500 mm, Z-axis 1300 mm, table size 4970 mm x 1200 mm, max. table load 15,000 kg/m, tool holder ISO 50, multi-angle milling head 45°, automatic angular positioning of axes B and A, spindle motor power 22 kW, hydraulic rotary lock, working feed rate 10,000 mm/min, rapid traverse rate 20,000 mm/min, with coolant system, total spindle operating hours: 25,496 hours. Lajdpfxjzn A U Rj Afkjf

Condition: used, Year of construction: 2009, travel distance X-axis: 7,000 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,100 mm, RFQ 200 KRA8 Manufacturer: TOS Kurim, CZ Ljdpfxjzvwn Ij Afkjaf Siemens S840 D control ISO 50 spindle taper 2-axis head, 4000 rpm Table: 2000 x 8000 mm X-axis travel: 7000 mm Y-axis travel: 2800 mm Z-axis travel: 1100 mm Distance between columns: 2550 mm Automatic tool changer (ATC) for 40 tools

Year of construction: 2005, condition: ready for operation (used), X-axis: 2000mm, y-axis: 750mm, z-axis: 800mm, max. workpiece weight: 2.5t, spindle hours: 12000h, connected load: 60kVA, length: 4000mm, width: 3100mm, height: 3200mm, weight: 22t, with documentation and tools, has been regularly serviced, on-site inspection is possible, the machine will be available from July 2024. Lsdpfspvk Ahex Afkoaf

Condition: ready for operation (used), Span: 15,030mm, load: 6.3t, lifting height: 6200mm, weight: 5.3t, including documentation and Trolley SWF. Lajdpfx Afjhyxpmekef

Year of construction: 2014, condition: ready for operation (used), Span: 3150mm, load: 6.3t, lifting height: 5450mm, weight: 2.85t, including documentation and Trolley SWF. Lajdpfx Aehyxpusfkof

Year of construction: 2002, condition: ready for operation (used), X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible. Ledpfxszrn I Rj Afkoaf

Condition: new, Type: Linear unit / robot track Part number: FA2495034 Condition: New, unused Linear unit length: approx. 3 x 5 m Lodpfx Afszuag Dekjaf Guide rail: 1 piece, length approx. 6 m Rail design: for outdoor use Screw pumps: 2 pieces Energy chain: 2 pieces Cable sets: 2 x KUKA CON XD30 H24B Cable length: 35 m Anchors: 3 x Fischer/KUKA Highbond Dynamic FHB-A dyn 16x125/25 Additional equipment: connecting elements, brackets and other mounting accessories

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley Lsdpfxov N A Ike Afkoaf -Type: D=110x550 -Number: 1x axle available -Dimensions: Ø 110 x 550 mm -Weight: 38.9 kg

Condition: good (used), Working platform, scissor lift, aerial work platform, cherry picker, lifting platform, scissor lift, scissor lift, drive axle aerial work platform, travel drive, drive axle -Manufacturer: GSL, travel drive axles left and right from aerial work platform -Type: KM 400 and HM 400 -Bolt circle: Ø 145 mm M14 Ljdpfx Afoizugveksaf -Dimensions: see photos -Delivery/price: complete -Dimensions: 630/370/H510 mm respectively -Weight: 52 kg/pc.

Condition: excellent (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=120x649.5 Part 3 Crane 1/2 .: 1031 4148 -Dimensions: see photo technical drawing Lajdpfjv N A Hasx Afkof -Number: 3x axle available -Price: per piece -Dimensions: Ø 120 x 649.5 mm -Weight: 35 kg/piece

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=120x320 Lajdpfx Aov N A Htefksf -Dimensions: see photo technical drawing -Number: 1x axle available -Dimensions: Ø 120 x 320 mm -Weight: 25 kg

Condition: excellent (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=90x244 -Dimensions: see photo technical drawing -Number: 3x axle available -Price: per piece Lodpfx Ajv N A Hyofkeaf -Dimensions: Ø 90 x 244 mm -Weight: 10.4 kg/piece

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=240x545 Ledpfxev N A Iqe Afkeaf -Number: 1x axle available -Dimensions: Ø 240 x 545 mm -Weight: 70 kg

Condition: excellent (used), Year of construction: 1974, travel distance X-axis: 10,300 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,800 mm, workpiece weight (max.): 25,000 kg, CNC milling machine – Butlers Elgamill Ljdpfxjzvw Ize Afkeaf * Manufacturer: Butlers * Model: Elgamill (1970s) * Control system: Heidenhain TNC 415 * Work table: 12,000 x 1,030 mm * Longitudinal travel of the column: 10,300 mm * Transverse travel of the column: 1,000 mm * Vertical travel of the column: 1,800 mm * Maximum table load: 25 tons

Condition: reconditioned (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, rotational speed (max.): 6,000 rpm, tank capacity: 1,200 l, SHW Powerspeed 5 Travel paths • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate Laedpjv Dhw Tjfx Afkof • X, Y and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Feed length: 10,000 mm Coolant system • Container capacity: 1,200 Liter ATTENTION the images are comparison images About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Lasderx Rtrjpfx Afksf Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, CNC Heidenhain TNC 426 30-tool changer SA 50 spindle with automatic tool changer Maximum spindle speed: 3000 RPM Lasdpfx Ajzh U Hfofkef Table size: 6000 x 1100 mm Travel: 4500 x 1200 x 1000 mm Chip conveyor 4th axis Tooling

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0397, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 9,000 rpm, table length: 2,500 mm, table width: 850 mm, coolant supply: 20 bar, Equipment: documentation/manual, Well-maintained MATEC 30HV with various features: automatic B-axis +/-90 degrees with 1-degree division integrated NC rotary table, diameter 630mm Heidenhain TNC426 with electronic handwheel internal coolant supply with paper band filter (20 bar) tool magazine with 36 positions spindle hours: 13,000h suitable for SK40 compressed air to the external nozzles chip conveyor with integrated coolant system (discharge height: approx. 850mm) chip flushing gun tool probe for tool measurement Lsdpfx Afezt Iztekeaf center partition available complete enclosure of the work area with a roof Bellows are new Lifting cylinder was renewed in 2026 Ball screw drive including nut, bearing, and coupling was renewed in 2025 The risk of dismantling and transport, as well as the costs of dismantling and transport, are entirely borne by the buyer. Inspection is possible by appointment.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 10 m/min, feed length W-axis: 800 mm, spindle diameter: 150 mm, table load: 20,000 kg, workpiece weight (max.): 20,000 kg, Travel X-axis – Longitudinal column: 8,000 mm Y-axis – Vertical: 2,500 mm Z-axis – Ram extension: 1,000 mm Lajdpfx Afozqlgzsksf W-axis – Spindle extension: 800 mm Headstock Spindle diameter: 150 mm Revolutions: 2,500 rpm Power: 40 kW Ram section: 460x520 mm Rapid traverse X and Y axes: 20 m/min Z-axis: 10 m/min MG 20 rotary table Table dimensions: 1,600x2,000 mm Longitudinal movement, travel: 1,500 mm Maximum centered load capacity: 20 tons Accessories Automatic indexing headstock 1ºx1º (Power 37 kW) Heidenhain measuring scales on all axes Operator platform Chip conveyor Floor plates (2 units)

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, torque: 1,178 Nm, coolant supply: 36 bar, Equipment: documentation/manual, rotational speed infinitely variable, LAGUN MM 6 Traveling Column Milling Machine The LAGUN MM 6 is a highly dynamic traveling column milling machine for the precise machining of large and complex workpieces. Ideal for single-part production as well as series production with the highest requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease purchase / financing possible ✔ High flexibility thanks to the traveling column concept ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in the construction of milling machines. The machines are convincing due to their reliability, ease of maintenance, and economical operation. Technical equipment: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN TFT displays 24" HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Tool changer: Lodpfx Ajhy Au Iefkjaf Automatic tool changer (ATC), 60-position Chip removal: Hinged belt conveyor Enclosure: Three-sided perimeter enclosure Accuracy: Positioning accuracy: ±0.030 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,600 mm, Travel ranges: Longitudinal (X): 4000 mm Vertical (Z): 1600 mm Lateral (Y): 1300 mm Rotary table: Diameter: 1600 mm Maximum speed: 250 min⁻¹ Drive power (100% duty cycle): 53 kW Maximum transport load (positioning): 8000 kg Maximum transport load (rotation): 3000 - 8000 kg Work table: Length: 4000 mm Width: 1240 mm Height of work table: 760 mm Automatically indexing milling head: Tool interface: ISO 50, DIN 69871 AD Automatic tool clamping: Clamping force 20000 N Spindle speed range: Spindle speed: 20 - 5000 min⁻¹ Full power from 340 min⁻¹ Torque at 32 kW/S1: 900 Nm Main drive: Drive power: 43 kW Maximum rapid traverse rate: X-axis 45000 mm/min Y- and Z-axis 35000 mm/min Maximum feed force: X, Y and Z-axis 16000 N Automatic tool changer Magazine positions in M version: Maximum tool positions: SK 50 40 positions Maximum tool positions: Capto C8 20 positions Machine weight: approx. 32,100 kg Equipment: - Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm - Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel. Processor speed 0.5 ms including HEIDENHAIN smarT.NC. - Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle). - Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable. Ledpfx Afezi S E Usksaf - Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected. - Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide. - Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder. - Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing. - Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping. - Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Condition: good (used), Co-rotating center with cutting insert Manufacturer: Röhm Type: 506 VL MK 6 Overall length: 400 mm Body diameter: 120 mm Laodpfx Aeducpbefkef Max. clamping force: 2000 c/oN Weight: 14 kg