Used Traveller for sale (9,246)

Year of construction: 2022, condition: excellent (used), ROTOX tilting table in as-new condition, including rails, transport table, and control cabinet Gtjdpex Dy S Sjfx Afnsu

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,300 mm, travel distance Z-axis: 1,500 mm, Manufacturer: SORALUCE Type: FS 8000 Control: HeidenHain iTNC 530 Year of manufacture: 2006 ATC Chain 40 positions Max. tool size Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Stroke with vertical head rotated 3300 mm Specifications Metric US Standard X-Axis 8000 mm Y-Axis 2800 mm Z-Axis 1500 mm Spindle power 30 kW Spindle speed 5000 Rpm Tool holder 50 ISO/Bt/Mk X - Axis feed Gtjdpfxexc Emxe Afnsu 15000 mm/min. Y - Axis feed 15000 mm/min. Z - Axis feed 15000 mm/min. Milling head auto-index 2.5 x 2.5 ° Dimensions (approximate) Length 17500 mm Width 4050 mm Height 5020 mm Weight 38400 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you check all important details.

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Gtjdpfx Ajxt En Dsfnou Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: ready for operation (used), Year of construction: 2017, Demag Overhead Crane Double-Girder Suspension Bridge Crane Inspection logbook available! Double-Girder Suspension Crane: Manufacturer: Liebl Kranbau GmbH Load capacity: 500 kg Gjdpox Eikyjfx Afnotu Year of manufacture: 2017 Crane track gauge: 4500 mm Length: approx. 6 m Width: approx. 5.13 m Chain Hoist: Manufacturer: Demag Model: DC-COM 5-500 Year of manufacture: 2017 Lifting capacity: 500 kg Fine lift speed: 1.1 m/min Main lift speed: 4.5 m/min Hook path: 4 m You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Technical data may deviate and errors in the item description can occur and are subject to change.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Gedpfx Aforx Rtrsnstu Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. Gedpfxsv Dxxns Afnstu tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, torque: 1,178 Nm, coolant supply: 36 bar, Equipment: documentation/manual, rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Work Table: Plate table / rotary table / pendulum machining (depending on configuration) Gsdpehy Au Iefx Afnotu Additional Equipment: Tool changer with double gripper, 40 stations Hinged belt chip conveyor (longitudinal) Work table per customer specification: plate table / rotary table / pendulum machining Accuracies: Positioning accuracy: ±0.030 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column Gjdoxmr Uqspfx Afnotu • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel X: 2,900 mm Travel Y: 1,000 mm Gsdoxltfhopfx Afnotu Travel Z: 700 mm Tool holder: SK40 Tool positions: 32 MACHINE DETAILS Control manufacturer: Heidenhain EQUIPMENT Chip conveyor

Condition: as good as new (ex-display), For sale travel motor used/reconditioned NB! we have more than 15,000 Demag parts in stock see our website or other ads Gedpfxsh Uqbbo Afnjtu

Condition: new, DEMAG hoist motors / crane motors / travel motors / drive motors: 1. Hoist motor type - MBV 132 C 12/2 - 1 piece (new). Gsdou U Uznepfx Afnjtu 2. Hoist motor type - MBV 100 A 12/2 - 1 piece (new). 3. Hoist motor type - ZNK 100 A 8/2 - 10 pieces (new). 4. Hoist motor type - ZNK 80 A 8/2 - 1 piece (new). 5. Travel motor type - ZBF 90 B 8/2 - 2 pieces (new). 6. Travel motor type - ZBS 80 b 12 - 8 pieces (new). 7. Travel motor type - ZBA 132 AL B050 - 1 piece 8. Travel motor type - KBA 80 B4 - 1 piece (new). 9. Traction motor type - KBA 90 B4 - 2 pieces 10. Traction motor type - ZBA 80 A4 - 2 pieces 11. Lifting motor type - 24/14 K4 P - 1 piece 12. Lifting motor type - 13/6 KF2 - 1 piece 13. Lifting motor type - 13/6 L4 - 1 piece 14. Traction motor type - 13/6 KF 8-2 - 2 pieces

Year of construction: 1989, condition: used, x-travel 1100 mm y-travel 600 mm Gedod Ih Rxepfx Afnstu z-travel 500 mm Control Heidenhain TNC 335 B* tool taper SK40 table surface - upper 1650 x 700 mm table face - lower 1870 x 300 mm spindle speed: 3000 Upm spindle motor ca. 9 kW control defekt!!!!! Horizontal and vertical milling Position change of the head is done manually-hydraulically Vertical head with drilling quill, drilling depth 100 m

Condition: new, Year of construction: 2023, travel distance X-axis: 16,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, Heidenhain / Siemens control Water-cooled inline motor 43 kW / 900 Nm Gtodsqy Hkaopfx Afnju Travel paths: X= 16,000 Y= 4,000 Z= 1,600 Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001° / Quill Additional equipment: Tool changer 40 / 60 / 80 / 100 positions NC tables Plate fields Carousel rotary tables Chip conveyor Fully automatic milling head changing system Pendulum machining Splash guard enclosure Operator-assisting technology packages

Condition: new, Year of construction: 2024, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,600 mm, Heidenhain / Siemens control Water-cooled inline motor 43 kW / 900 Nm Travels: X= 4,000 - unlimited Y= 2.600 / 3.200 Z= 1.600 Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001 / quill Further equipment: Tool changer 40 / 60 / 80 / 100 Gtjdpfx Afsqy Hineneu NC tables Plate fields Carousel rotary tables Chip conveyor Fully automatic milling head changing system Pendulum machining Splash guard cladding Operator-supporting technology packages

Condition: ready for operation (used), Year of construction: 2004, operating hours: 8,087 h, functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 5,000 rpm, table height: 925 mm, The machine has undergone a complete inspection, with the milling head and the telescopic cover of the X-axis repaired. Additionally, the control panel and the polycarbonate doors have been renewed, and the machine has been thoroughly cleaned. TECHNICAL DETAILS Travel distances X-axis: 5,300 mm Y-axis: 1,500 mm Z-axis: 2,000 mm A-axis: +45° to −225° B-axis: +165° to −18° Spindle data Spindle speed range: 60 – 5,000 rpm Tool holder: SK 50 DIN 69871 Spindle outer diameter (front bearing): 140 mm Spindle bore: 90 mm Table dimensions Clamping area: 6,000 × 1,200 mm Table height: 925 mm Feed rate: 10 – 6,000 mm/min Rapid traverse (X & Y): 15,000 mm/min Rapid traverse (Z): 10,000 mm/min MACHINE DETAILS Gtodpfxexbd A No Afnsu Control system Manufacturer: HEIDENHAIN Model: TNC 530 Operating hours Spindle hours: 8,087 h Control system on-time: 3,785 h Machine on-time: 30,238 h Note: The machine has already been dismantled.

Condition: new, ABUS Spare Parts: Travel motors / Crane motors: 1. Motor type: A71872 (new). 2. Motor type: 100/80 8/2 (new). 3. Motor type: 100/170 8/2 (without brake, new). Gearboxes: 1. Type: AZF - V 500 - 2 units (used). 2. Type: AN: 44111 (new). Lower block / Hook: 1. 30 ton (used). 2. 12.5 ton (new). Trolley / Travel carriage: Gjdev Dupiepfx Afnotu 1. Load capacity - 1400 kg (new). Brake magnet: 1. Type: FDB 23 (new). 2. Type: AZF Gr. 13 (new). 3. Type: AZF gr. 13 (new). Hoist motors: GM 5000 – 2 units Type: 132 / 260 12/2

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes 36 tool stations SK40 Pendulum operation with partition wall Gtjdpfx Aexup Iqofnsu 2x swiveling bridges Coolant tank 290 l with belt filter Control unit Heidenhain TNC 410 MA A-drive RTA 200/300

Condition: good (used), Year of construction: 2004, travel distance X-axis: 8,250 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 37 W, X-AXIS STROKE 8250 MM Y-AXIS STROKE 2000 MM Z-AXIS STROKE 1250 MM SPINDLE NOSE ATTACHMENT ISO 50 RAPID FEED X-Y-Z AXIS FROM 15000 TO 25000 MM/MIN SPINDLE MOTOR POWER 37 KW MAX SPINDLE SPEED 5000 RPM 10000 X 1100 MM BENCH CNC HEIDENHAIN iTNC 530 TOOL CHANGER 60 PLACES AUTOMATIC BI-ROTATIC HEAD 1 ° X 2.5 ° INTERNAL COOLING AT 15 BAR Godpfx Afevza Ifsnjtu 3D THERMAL EXPANSION COMPENSATION ELECTRONIC HANDWHEEL NR 02 CHIP CONVOYERS

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 Gjdpfxjptlbls Afnstu gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Condition: excellent (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, pivoting range: 360 °, SHW PowerSpeed 5 Travel Paths • X-axis (Bed): 10,000 mm • Y-axis (Vertical): 2,100 mm • Z-axis (Horizontal spindle): 1,300 mm Control System • CNC Control: Heidenhain iTNC 530 Feed Rates • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed range: 36 – 4,000 rpm Gsdpfx Aexgq Ayjfnotu o Intermittently 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Coolant System • Tank capacity: 500 l About the company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include supply of spare parts, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ---- Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used bore milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC mill - CNC fraesmaschinen - CNC milling machines - milling machine - large component machining - large part machining - CNC large part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: excellent (used), Travels - X axis (bed): 16,000 mm - Y-axis (vertical): 2,100 mm o Option Y = 3.100 mm - Z-axis (headstock): 1,200 (1,500) mm Control - CNC control: Siemens Sinumerik 840 C o Option control modification Heidenhain iTNC 530 o Option control modification Heidenhain TNC 640 o Option control modification Siemens Sinumerik 840 SL Feed rate - X-, Y- and Z- axis stepless from: 2 - 12.000 mm/min Universal milling head in orthogonal design - swivel range milling head: 340 x 1 degree - swivel range milling head: 180 x 1 degree - tool holder: SK 50 DIN 69871 - Speed: 2.800 rpm Clamping plate - T-slots: 28 H7 - T-slot distance: 250 mm, - clamping area: 18.000 mm x 1.500 mm Chip conveyor (2 pieces) - Ejection height above floor: 1,250 mm CNC insert rotary tables (4 pieces) - clamping surface diameter 1.250 mm Coolant system - Paper belt filter system o tank capacity: 30.000 l General overhaul 2016 • 1996 - Year of manufacture Gsdenvd Tnjpfx Afnetu • 2016 General overhaul at MBM About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main focus is in the area of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - Control system modernization _____ _____ used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metal working - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - cnc milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - cnc milling machine used - metal milling machine used - metal milling machine used - cnc milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - metal milling machine used - cnc milling machine used metal milling machine used - used cnc milling - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - cnc large part machining - milling - shw - uf6 - uf 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 0112, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 9,000 rpm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Travel distances Travel X: 1,500 mm Travel Y: 3,500 mm Travel Z: 1,000 mm Worktable dimensions: 4,500 x 1,600 mm Spindle and Tooling Max. spindle speed: 9,000 rpm Swivel range of angular head (B-axis): ±90° Tool holder: SK 40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 5,000 x 3,700 mm Weight: 32,000 kg Gtjdjw Hrh Hjpfx Afnju EQUIPMENT 2 ALMATIC machine vices Various clamping devices for the machine Technical documentation

Condition: used, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 4,000 rpm, spindle motor power: 37 W, X-AXIS TRAVEL: 16,000 MM Z-AXIS TRAVEL: 1,500 MM Y-AXIS TRAVEL: 3,500 MM SPINDLE MOTOR POWER: 37 KG SPINDLE NOSE CONNECTION: ISO 50 Gedpfxjx A Ulwe Afnotu SPINDLE SPEED: 4,000 RPM HEIDENHAIN iTNC 430 CNC 80-POT TOOL CHANGER 2.5° X 2.5° AUTOMATIC HEAD INTERNAL AND EXTERNAL COOLANT HEXAGON WORKPIECE PROBE 2000 X 2000 MM ROTARY-TRANSLATING TABLE, 15 TON LOAD CAPACITY, 1500 MM V-AXIS STROKE OPERATOR CABIN WITH OPERATOR FIXED PLATES CHIP CONVEYOR

Condition: excellent (used), Year of construction: 2009, x-travel 6000 mm y-travel 2100 mm z-travel 1500 mm control HEIDENHAIN iTNC 530 feed 2- 20 m/min spindle turning speed range 20 -4000 U/min table dimension - longitudinal 7000 mm table dimension - cross 2000 mm total power requirement 79 kW weight of the machine ca. 55 t dimensions of the machine ca. 15 x 7 x 4,6 m The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Gtodpfx Afevwgl Aenju Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min

Condition: new, overall weight: 3,500 kg, Year of construction: 2023, Böckmann Traveller G3 for 1-4 horses with tack room, The trailer is NEW and immediately available. Gtsdpfx Afsv N Szmonou Perm. total weight 3500 kg. Errors and changes reserved. * NET SALE POSSIBLE * TOP leasing offer possible * AVAILABLE IMMEDIATELY Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 61 23816 Leezen Sales and service of all makes in the field of horse transporters and trailers. Please make an appointment in advance under Richard Theurer Andreas Theurer