Used Travel Switch for sale (15,196)

Condition: like new (used), functionality: fully functional, Year of construction: 2018, load capacity: 3,600 kg, power: 5.1 kW (6.93 HP), main lifting speed: 4,800 mm/min, fine lifting speed: 580 mm/s, working height: 6,000 mm, Equipment: documentation/manual, --- PLEASE SEND US YOUR PRICE OFFER --- 2x Konecranes CXT single-rail trolley for single-girder bridge crane, wire rope hoist, tandem set including radio control and control cabinet (year of manufacture 2018) Original new price at the time: approx. EUR 40,000 / NET For sale is a high-quality, complete tandem electric wire rope hoist set from the premium manufacturer Konecranes, model CXT30410020A35FALOS (ALMOST NEW). The system was used in an industrial setting and was professionally dismantled in the summer of 2022 as part of the closure of the Ettlinger Weaving Mill (as can be seen in the documentation). Since, according to the available factory certificate, the wire rope was renewed shortly before the dismantling on June 22, 2022, the installed ropes are practically new. All documents, inspection records and circuit diagrams are available in the original Konecranes folder. Technical data (per hoist/trolley): Manufacturer: Konecranes Model: CXT30410020A35FALOS Type: Single-rail trolley / under-flange runner (single-girder bridge crane / monorail) Flange width of girder: 180 mm Year of manufacture: 01/2018 Load capacity: 1x 2,000 kg (2.0t) & 1x 1,600 kg (1.6t) – total in tandem: 3.6t Lifting height: 6.0 m Duty class: M5 (FEM 2m) – very robust industrial design Lifting speed: 4.80 / 0.58 m/min (main and fine lifting) Trolley speed: 20.0 m/min Operating voltage: 400 V / 3~ / 50 Hz (control voltage 48 V) Lifting motor: 2.25 kW (S3-60% duty cycle) | Drive motor: 0.3 kW Protection class: IP55 Extensive accessories & equipment: HBC-radiomatic radio remote control: Yellow handheld transmitter with selector switch for tandem operation (Crane I / I+II / II) including HBC receiver. Batteries are fully charged. SICK reflective light barrier (WL280-2R4331): Integrated collision protection for safe parallel operation of both trolleys. Complete electrical system: Including central crane switch cabinet (Siemens components) and AKAPP cable connection. Like-new load ropes: Renewed on June 22, 2022 (as can be seen in the documentation) and hardly used after the subsequent decommissioning. Complete documentation: Original folder with inspection records, operating instructions for hoist/drive/radio, spare parts catalog, circuit diagrams and software CD. Special features & highlights: Tandem operation (HBC radio): Control of trolley I, trolley II or both synchronously via transmitter on a main girder – ideal for long loads without transverse travel. Collision protection: SICK reflective light barriers prevent unintentional collisions. Fine lifting & soft start: 2-stage lifting motor (4.8 / 0.58 m/min) for millimeter-precise positioning. Minimal hook drift: Thanks to a special drum geometry, the hook travels almost exactly vertically – almost without lateral displacement when lifting/lowering. Long service life: CXT design for maximum hook height; industrial class FEM 2m / ISO M5. Including original Konecranes weather and impact protection: Robust protective plates to protect the trolleys. Note on load capacities & documents: * System 1 is rated at 2.0 tons (2,000 kg) according to the main inspection record. * System 2 is rated at 1.6 tons (1,600 kg) according to the inspection record. Chjdpfx Ajz D I Hhjdhec * Hook: Both hoists are equipped with identical Konecranes standard hooks for 2.0t from the factory. Condition & safety information: The units operated flawlessly until their removal in 2022 and are secured to pallets. Acceptance inspection before re-com

Condition: used, Year of construction: 2002, machine/vehicle number: 6243, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Base machine / Travel ranges: X-axis machine stand 5,000 mm, Y-axis spindle head slide 2,100 mm, Z-axis spindle head 1,500 mm. Machine stand: Compact, torsion-resistant welded construction with hardened flat guide rails and telescopic steel covers against chips and coolant. Spindle head slide: Cast iron design with hydraulic weight compensation, guided via combined roller/sliding guides. Machine bed: Flat bed design with approximately 1,200 mm guide rail width and roller compact guides for high precision. Automatic universal milling head: CNC-swiveling milling head mounting 340 x 1°, Hirth gearing approximately 125 kN; milling head 180 x 1°, approximately 100 kN; milling spindle with hydromechanical tool quick-change system, clamping force approximately 25 kN; tool mounting SK 50, DIN 69871. Main drive: 37 kW at 100% ED, 53 kW at 40% ED; externally ventilated AC motor, 2-stage gearbox with automatic shifting; speed 22–4,000 1/min. Feed drives: Digital AC single drives; X/Y: 2–12,000 mm/min, Z: 2–15,000 mm/min. Control / Measuring systems: Central operation via Heidenhain TNC 430 M. Direct, non-contact linear measuring systems. Electrical system: EN 60204 / VBG 4, 400/230 V ±10%, 3 phases, 50 Hz, 24 V control voltage; connected load approximately 80 kVA. Control cabinet IP54, main motor IP55. Lubrication: Csdpfxsz Dvycj Adhshc Main gearbox/milling head drive oil circulation lubrication; main spindle grease long-life lubrication; guides/ball screws pulse central lubrication. Coolant: Internal/external coolant supply with paper band filter. Max. 50 l/min at 10 bar or 47 l/min at 16 bar; tank 500 l. Coolant/air switching. Oil cooler for temperature stabilization and increased manufacturing accuracy. Leveling system: Electromechanical via 2 vertical ball screws with separate drives, measuring systems and CNC axes. Work platform: Moving in the X-direction, with CNC control panel; electrically secured door with viewing window. Pick-up station: 10 tools; max. tool weight 25 kg, length 400 mm, Ø 125 mm, with free neighboring spaces Ø 250 mm. Clamping plate: 3,500 x 3,000 mm; T-slots 22 H12 DIN 650, spacing 250 mm; clamping surface accuracy grade 1 DIN 876. CNC rotary table: Clamping surface 1,250 x 1,600 mm / Ø 1,800 mm; Hirth division 360 x 1°; 6 longitudinal slots 22 H12, 2 guide slots 22 H7; T-slot spacing 160 mm; centering sleeve Ø100 H7 x 20 mm; max. 5 1/min; tilting moment 85,000 Nm; tangential moment 120,000 Nm; table load max. 11,500 kg. Additional equipment: Oriented spindle holder 360 x 1°; hinged band chip conveyor for X = 5,000 mm, feed width approximately 350 mm, discharge height approximately 1,250 mm; 3D wireless measuring probe; electronic handwheel HR 410 for 3 axes; pendulum machining for 2 work areas with monitored safety zones; manually movable splash guard. Collision monitoring: Brankamp CMS with piezoelectric strain gauge; if the process limit is exceeded, the axes are braked and the machine is switched off. Paint finish: Machine/control cabinet RAL 7035, milling head/spindle head RAL 5021; DD structural paint, semi-gloss, oil- and alkali-resistant. Power connection: 400 V, 3 phases, 50 Hz, 80 kVA, 160 A slow-blow; compressed air 4–6 bar, connection G 1/4. CE-relevant environmental protection to be provided on site; adapter plates for chip/coolant return are not included. Coordinate data: Y 730.0124. Documentation: Operating manual SHW-UF6L and Heidenhain TNC 430.

Condition: used, axle configuration: 3 axles, first registration: 11/2006, total length: 13,320 mm, total width: 2,550 mm, tire size: 235/85R16, wheelbase: 8,700 mm, color: brown, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = Other - Anti-slip control (ASR) - Roof spoiler - Electric windows - Refrigerator - Cruise control Other - Sun visor = Notes = TRAVEL SUPREME INC First registration: 11-10-2006. Max. weight: 9,000 kg. Trailer is used as a mobile training room. 2 x slide-out. Toilet. Kitchen. Stove. Ovens. Fridge. Heater. = Further information = Tire size: 235/85R16 Chedpfx Adezkt Dhehjc Brakes: Drum brakes Center axle 1: Tire tread left: 75%; Tire tread right: 75% Center axle 2: Tire tread left (inner): 80%; Tire tread left: 75%; Tire tread right (inner): 80%; Tire tread right: 75% Center axle 3: Tire tread left: 75%; Tire tread right: 75% GVWR: 9,000 kg Model number: 2 X SLIDE OUT / CAMPER / RV = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Condition: used, Year of construction: 2017, operating hours: 15,218 h, functionality: fully functional, machine/vehicle number: 5639, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,600 mm, travel distance Z-axis: 1,900 mm, position of the milling head: 0.001°, mount diameter: 50 mm, rotational speed (max.): 4,000 rpm, torque: 2,000 Nm, coolant supply: 70 bar, spindle motor power: 60,000 W, Equipment: documentation/manual, rotational speed infinitely variable, SORALUCE CNC gantry milling and boring center with complete equipment x-10000mm y-3600mm z-1900mm - Automatic indexing milling head H 342 0.001° x 0.001° - Additional long angular head 90° - Capto C6 tool holder, horizontal/vertical with automatic tool clamping - Main drive 60KW 2000Nm - Machine weight 80 t - Safety package for the rear machine area - Safety package for the working area Chodoz Iy Irspfx Adhjc - Heidenhain iTNC 640 - Dynamic Active Stabilizer - Cross-axis compensation - Automatic head changing system - Milling slide extension z-1900mm - High-performance milling head 4000 rpm 1531Nm 0.001° x 0.001° - Additional long angular milling head 90° 2000 rpm 700Nm - Capto C8 turning tool holder horizontal / vertical with automatic clamping - Fixed storage station for 8 heads - Heidenhain handwheel - Coolant tank 200 liters - Automatic tool changer 120-fold - Increased tool weight 35 Kg - SORALUCE rotary table, diameter 3500mm with 2000mm travel, payload 40 t - Measuring probe M+H - Tool measurement M+H - Adaptive Control - Industry 4.0 machine status in real time - Swivel machining - 3-sided complete splash guard for the rotary table - Plate table 5000x3000x300mm - Chip conveyor - Teleservice remote diagnostics - 3D volume model - Interpolation turning HEIDENHAIN

Condition: like new (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 18,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,750 mm, mount diameter: 220 mm, spindle speed (max.): 3,600 rpm, rotational speed (max.): 1,800 rpm, table load: 75,000 kg, coolant supply: 70 bar, spindle motor power: 1,000 W, workpiece weight (max.): 75,000 kg, feed length W-axis: 1,400 mm, MOBILE COLUMN BORING MACHINE WITH DOUBLE TABLE FPT INDUSTRIE SPIRIT 450 Technical specifications Type: Mobile column boring machine with double table Brand and model: FPT Spirit 450 CNC: Siemens Sinumerik 840D Installation: 2017 Technical data Axis travels: X: 18,000 mm Y: 5,000 mm Z: 1,750 mm W: 1,400 mm B: 360° V: 3,000 mm U: 400 mm Maximum workpiece dimensions: Dimensions of each table: 4,000 x 3,000 mm Maximum machinable height: 5,000 mm Maximum load capacity: 75 tons Positioning accuracy: 0.05 mm Spindle speed: Up to 3,600 rpm with TUPC-M head Normal speed: 1,800 rpm Spindle power: 100 kW Tool types: Cjdpfx Adez Hl A Eshehc ISO 60 C.F. ISO 50 ISO 50 C.F. CAPTO C8 Boring bar diameter: Ø220 mm RAM: 650 x 560 mm Accessories and automation 2 rotary-movable tables with dimensions 4,000 x 3,000 mm each. Automatic tool changer for ISO 60 and ISO 50, via a storage and management system with a KUKA anthropomorphic robot. Manual tool changer for CAPTO C8 for the D’Andrea UT5 head. Measuring probe installed on the machine: SONDA PROBE RPM600 (RENISHAW). Coolant and lubrication system Internal and external cooling via cutting fluid: Internal cooling of the boring bar tool: Pressure: 70 bar Flow rate: 80 l/min Internal cooling of the head tools: Pressure: 40 bar Flow rate: 28 l/min External cooling of the tool: Pressure: 4 bar Flow rate: 28 l/min Internal and external air system for cooling the tool when cutting fluid cannot be used. Heads and accessories TU144: Universal roughing head ISO 50, with angular indexing every 2.5°. Maximum spindle speed: 1,800 rpm. TUPC: Universal finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 1,800 rpm. TUPC-M: Universal multiplied finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 3,600 rpm. D’Andrea UT5 head: Head for turning with CAPTO C8 tools. Maximum spindle speed: 251 rpm. ISO 60 spindle: Main spindle. Maximum speed: 1,800 rpm. ISO 50 reduction for finishing: Maximum speed: 1,800 rpm. ISO 50 reduction for roughing: Maximum speed: 1,800 rpm. Long ISO 50 reduction: Maximum speed: 1,800 rpm. PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, FOLDING MACHINE)

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, CNC Heidenhain TNC 426 30-tool changer SA 50 spindle with automatic tool changer Maximum spindle speed: 3000 RPM Cedezh U Hfjpfx Adhohc Table size: 6000 x 1100 mm Travel: 4500 x 1200 x 1000 mm Chip conveyor 4th axis Tooling

Condition: excellent (used), ABB SACE Emax E3S/MS 25 2500A 4-Pole Drawout Switch-Disconnector with Cradle ABB SACE Emax E3S/MS 25 heavy-duty low-voltage air switch-disconnector, rated at 2500 A, supplied with its withdrawable chassis and rear busbar connections. Designed for use as a main incomer, bus coupler or isolating switch in industrial low-voltage distribution systems, data centres, generator installations, production facilities and critical-power applications. This is an MS switch-disconnector / isolator, not a circuit breaker fitted with an electronic protection trip unit. Chodpfx Adszlyk Dohoc Technical details Manufacturer: ABB Series: SACE Emax E3 Model: E3S/MS 25 Equipment type: Air switch-disconnector / isolator Rated uninterrupted current, Iu: 2500 A at 40°C Number of poles: 4 Version: Withdrawable / drawout Rated short-time withstand current, Icw: 75 kA for 1 second Manual stored-energy operating mechanism Push ON and Push OFF controls Mechanical position and spring-status indicators. Rear high-current busbar terminals Withdrawable chassis / fixed part included Key-locking mechanism fitted

Condition: used, Year of construction: 2010, functionality: fully functional, For sale is a powerful and precise 5-axis CNC portal milling machine from the premium manufacturer Kolb, model Studioline M. The machine is ideally suited for model making, mold making, and large-format machining. Technical data & highlights: Manufacturer: Kolb Model: Studioline M Initial commissioning: March 2010 Control system: Fidia, including handheld operating device / handwheel HPX21 Working area / travel ranges: X-axis: approx. 11,500 mm Y-axis: approx. 1,550 mm Z-axis: approx. 2,550 mm B-axis: ± 210° C-axis: ± 104° Spindle & tool: Codpfx Aez Ahrkedhjhc Tool holder: HSK 50A Spindle speed: max. 16,000 min⁻¹ Dynamics & drives: Linear axes (X, Y, Z): Feed rate up to 16 m/min Scope of supply & notes: Tables: Includes 2 square clamping tables. (Note: The 4 columns shown in the pictures are not included in the scope of supply.) Transport & handling: Dismantling & transport: The machine has already been dismantled; worldwide delivery is possible upon request. Loading: Will be carried out by us, free of charge. Condition & inspection: The machine is in a well-maintained condition, considering its age. An inspection is possible after prior arrangement. However, the machine has already been dismantled and is no longer powered. Subject to prior sale and errors in the technical specifications.

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes 36 tool stations SK40 Pendulum operation with partition wall Chodpfjxup Iqox Adhec 2x swiveling bridges Coolant tank 290 l with belt filter Control unit Heidenhain TNC 410 MA A-drive RTA 200/300

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 6 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 11,000 mm, total height: 5,430 mm, total length: 16,630 mm, table length: 2,500 mm, table width: 2,500 mm, torque: 2,045 Nm, table load: 40,000 kg, coolant supply: 40 bar, workpiece weight (max.): 40,000 kg, grinding spindle motor power: 46,000 W, rotary table diameter: 2,500 mm, Equipment: documentation/manual, CNC HEIDENHAIN iTNC530 Drive system: SIEMENS SINUMERIK TRAVEL Longitudinal (X): 10,000 mm Vertical (Y): 3,500 mm Cross (Z): 1,500 mm Table (V): 1,500 mm Axis support: Hydrostatic FEED RATES Working feed rates: 0 – 6,000 mm/min Rapid traverse rates for axes Y/Z/X: 25,000 mm/min SPINDLE Ram section: 700 x 500 mm Power: 46/37 kW Chedpfx Adez Ib Elohec Rotation speed: 5,000 rpm Torque: 1,691 – 2,045 Nm Morse taper: ISO 50 ATC Number of positions: 100 CLAMPING SURFACE: Dimensions: 10,000 x 2,500 mm Load capacity: 10,000 kg/m² TABLE Surface: 2,500 x 2,500 mm Travel: 1,500 mm Resolution (B-axis): 0.001° Load capacity: 40,000 kg Support: Hydrostatic HEAD Type: TUPC Spindle taper: ISO50 A/C axis: 0.001° Maximum torque: 1,210 Nm Maximum speed: 5,000 rpm Maximum power: 46/37 kW Coolant: Internal, 40 bar HEAD 2 Type: SEELS4 Spindle taper: ISO50 Spindle extension: 400 mm HEAD CHANGING PICK-UP STATION Positions: 3 Maximum workpiece weight: 79.3 kg Machine dimensions: 16,630 x 11,000 x 5,430 mm Year of construction: 2008 ACCESSORIES: - 3-position head changer - High pressure, 40 bar - Filtration system - Chiller - Renishaw RMP60 probe - Blum tool presetter - Electrical diagrams - Perimeter guarding - Chip conveyor - Operation and maintenance manuals - CE certification

Condition: used, This listing is for the Agilent 34970a Data Loger Switch Unit The unit is in full working condition and is ready for immediate use Key Features: 3-slot mainframe: Supports up to 60 2-wire channels using plug-in modules. Built-in 6½-digit DMM (Digital Multimeter): Measures voltage, current, resistance, frequency, and temperature. Plug-in Modules Available: e.g. 34901A (20-channel multiplexer), 34902A (16-channel actuator), 34908A (40-channel single-ended multiplexer), etc. Interfaces: GPIB and RS-232 standard (USB via adapter). Logging Capabilities: Can log data over time for test/monitoring applications. Scan Rates: Up to 250 channels/sec depending on configuration. User Interface: Front-panel controls with LCD display. Remote control via SCPI commands. Typical Applications: Chodpfx Adjxhfcdshoc Environmental monitoring (temperature, humidity) Functional test systems Data logging in labs Automotive and aerospace test setups Industrial process monitoring

Condition: good (used), rotational speed (max.): 2,050 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, table length: 600 mm, table width: 210 mm, Used conventional milling machine Make: Metba Model: MB-1 Features a 3-axis dimension display. Table: 600x210mm Travel: - Longitudinal with motor / Manual table: 290mm / 300mm - Vertical manual with bellows / without bellows: 270mm / 320mm - Vertical motorized with bellows / without bellows: 260mm / 310mm Cedpoz Dtw Ssfx Adhjhc - Cross travel of the headstock, manual: 180+120mm Automatic feeds: - Vertical and longitudinal: 15 to 500 mm/min. - Slow feed: 7 mm/min. - Rapid traverse: 1200 mm/min. Speeds: 12 (From 45 to 2,050 rpm) Motor power: 5Hp (Three-phase 380V) Headstock type: Swivel / Universal (accepts arbor or vertical headstock). Common uses: Machining of small/medium-sized parts, prototyping, and maintenance or restoration work. Includes: - Vise with swivel - Collet chuck with various sets of collets - Various milling tools (See photographs of the material on the floor)

Condition: good (used), Year of construction: 2001, Boring/milling machine MECOF Performa, serial no. 05 01 06, year of manufacture 2001, HEIDEHAIN TNC 430M control, X/Y/Z 2,000/1,200/1,000 mm, table 2,200x1,150 mm, universal milling head TBA4, dust extraction, coolant system, control cabinets, filter systems. Cedez Icfmopfx Adhehc

Condition: used, Butler Elgamill CNC Travelling Column Bed Type Mill x 5000mm T slotted Table 8,000mm x 1030mm Column travel X 6200mm TBC Ram travel Y 1250mm TBC Vertical travel of Head Z 1950mm TBC Spindle speeds Various and a Max of RPM TBC Spindle Taper 50 Spindle drive motor HP TBC Power feeds Horizontal and Vertical 6 – 500 mm/min Chsdpfx Adsyx Hv Aehjc Rapid power traverse to all motions 2,000mm/min Complete With: Heidenhain CNC Control Manual Indexing Head Machine Data: Machine weight 20,000kg

Condition: good (used), Year of construction: 1999, Boring/milling machine MECOF Agile M3, serial no. 07 99 05, year of manufacture 1999, FIDIA control system, X/Y/Z 6,000/1,250/2,000 mm, chip conveyor, indexing head, tool changer, chip filtration system. Chsdpfx Adjz Icc Eehsc

Condition: used, Year of construction: 2002, Control Heidenhain x-travel 7.300 mm y-travel 1.500 mm z-travel 2.000 mm spindle tunring speed 4.000 U/min tool taper SK 50 number of tool places 40 Pos. Zustand: gebraucht Verfügbar: ab März 2027 Die Maschine ist unter Strom vorführbereit. Technische Merkmale & Zubehör: Chodpfx Ajz Ic Alsdhsc - Schaltschrank neu verkabelt - Orthogonal-Indexier-Fräskopf, 1° + 2,5° - Späneförderer - Kühlmittelanlage - Plattenfeld Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. Codpfx Adszz H Emohjhc KEY TECHNICAL DATA Machine year of manufacture: 2012 Capacities / Travel: Longitudinal (X): mm 8,000 Vertical (Y): mm 2,600 Lateral (Z): mm 1,500 Table size: Length: mm 10,000 Width: mm 2,500 Distance between grooves: mm 250 Paint finish: RAL 5011 (steel blue) RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Drive power: 100% ED 32 kW Spindle speed: min-1 20-4,000 Torque: Nm 900 Max. rapid traverse speed: X, Y and Z axes mm/min 25,000 Weight: kg approx. 34,200 Heidenhain iTNC530 Automatic milling head, diagonal, stepless Tool changer (60 magazine slots) Chip conveyor Coolant system 20 bar & internal coolant Preparation for NC rotary table RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are sourced by us after a rigorous selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Jobs Jomach 241, Year of manufacture 1999, Siemens 840 D control system, Travel range X/Y/Z 3400/2500/1250 mm, 16-position tool changer, ISO 50 spindle connection, Table size 3000 x 1500 mm, Distance between columns 2200 mm, Swivel head, 2 x tilting head, Tool magazine, 2 x swivel-rotating head, Codpfxezxxcxs Adhehc Tailstock without head, 3 A steady rest.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 7,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,400 mm, Complete with all assemblies required for installation and commissioning x = 7 m y = 1.6 m z = 1.4 m (800 mm + quill = 600 mm) General overhaul in 2007, year of manufacture 1991 Rapid traverse: 12,000 mm/min; w-axis: 6,000 mm/min Csdsz Dunlopfx Adhohc Fitted with new Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, and new control cabinets. ECOCUT 1 was only operated for a few hours thereafter. TDV 2 rotary table, max. workpiece weight 6 t / clamping area 1,000 x 1,000 mm TDV 3 rotary table, max. workpiece weight 12 t / clamping area 1,250 x 1,600 mm Accessories: 2 right-angle milling heads / chain-type automatic tool changer / platen table / full enclosure / Knoll hopper feeding system / extraction unit / coolant system with belt filter. Supplied with all BWF fixtures required for installing the machine bed and clamping plate.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, position of the milling head: 360 x 1° en 180 x 1°, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 9,000 mm, total height: 4,900 mm, total length: 16,200 mm, table length: 5,500 mm, table width: 2,600 mm, table load: 10,000 kg, coolant supply: 16 bar, workpiece weight (max.): 10,000 kg, grinding spindle motor power: 30,000 W, feed length W-axis: 1,000 mm, SHW Powerspeed 5 with Heidenhain iTNC530, including: • X-8,000 mm, Y-2,100 mm, Z-1,300 mm Csdpfx Aozz Hkpodhohc • W-1,000 mm with C-axis, with 1600 x 1600 mm (suitable for a 10T table load) • Fixed clamping table with T-slots 22 mm, 5,500 x 2,600 mm • Orthogonal machining head SK50, max. 6,000 rpm, 360 x 1° and 180 x 1° • Power P = 30 kW at 100% ED / 41 kW at 40% ED. • Tool holder SK50 according to DIN 69871/72-AD • Heidenhain measuring scales in X, Y and Z axes • Chip conveyor in articulated belt design for X-8,000 mm • External and internal coolant supply with paper band filter and 1,000L clean water tank. High-pressure pump 16 bar • Air cooling along and through the spindle • Tool magazine with 48 positions SK50 (max. Ø125 mm, max 400 mm length, max. 25 kg) • Shuttle machining capability with a fixed position for the removable partition • Dimensions L x W x H = 16.2 m x 9 m x 4.9 m (from the normal floor) • Electrical connection 400V / 50 Hz / 3Ph, 65 kVA and 3 x 95A slow-blow fuse

Condition: good (used), Year of construction: 2007, CNC traveling column milling machine Manufacturer: KEKEISEN Machine model: UFF 4000/16 Control system: Heidenhain iTNC 530 Year of manufacture: 2007 TECHNICAL DATA X-axis travel: 4000 mm Y-axis travel: 1400 mm Z-axis travel (vertical): 1600 mm Table area: 4200 x 1500 mm Table load: 10 t Spindle speeds (gear stages): 20 – 7000 rpm Spindle drive: 30 kW Rapid traverse: 18 m/min Machine weight approx.: 24.0 t + table Chsdez Ear Sjpfx Adhjc EQUIPMENT FEATURES + CNC control system HEIDENHAIN iTNC 530 with fast MC424 + X-axis with hydrostatic guidance + B-axis with stepless swivel function + Air, water supply through the spindle and spray ring + Edge gap filter for water purification + Additional tank and pump for deep hole drilling at 80 bar + Minimal lubrication system + Chip conveyor with water pump and water tank + Cooling unit for hydrostatic guidance + Cooling unit for spindle and gearbox cooling + NC dividing head WALTER TABIH Evolution 320 EG, year of manufacture 11/2014, with horizontal table axis and tailstock MK6, center height 320 mm, max. Subject to changes and errors in the technical data and specifications.

Condition: good (used), Year of construction: 1990, 1 used, well-maintained CNC tool milling machine, traveling column design, with CNC path control GRUNDIG Dialog 11 Chsdohhuf Hepfx Adhec Table size 1600 x 675 mm Tool holder SK / ISO 40 Travel distances X-axis, longitudinal 1200 mm Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load 2000 kg Spindle speed range 20 – 6300 rpm Feed rate range, stepless 2 – 10,000 mm/min Rapid traverse in all axes 10 m/min Quill stroke 80 mm Drive power 100% ED 7.5 kW 40% ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Control cabinet weight 470 kg Accessories / Special features: • CNC tool milling machine suitable for tool and fixture manufacturing, training, and mold making • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets, even with islands, shifting and rotation of the coordinate system • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling attachment • Full protection enclosure • Ball screw spindles in all 3 axes • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 1100x600 + 850x600 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Csdozavluspfx Adhohc Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, This listing is for the Agilent 34970A Data Aquisition Switch Unit Codpfex Szacjx Adhjhc The unit is in full working condition and is ready for immediate release. The Agilent 34970A Data Acquisition/Switch Unit is a modular test and measurement instrument designed for data logging, signal measurement, and flexible switching in lab, production, and automated test environments

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: AGH634, 1x Mobile column-mounted slewing crane, mobile gantry crane Type WK1 - Year of manufacture 2014 Load capacity at full reach: 250 kg / 0.25 tonnes Overall height: approx. 3.7 m, Reach: approx. 3 m Hook height: approx. 3.2 m, Lower edge of boom: 3.5 m Base size: approx. 110 x 110 cm Column with counterweight incl. ABUS 250 kg chain hoist, cable carrier and accessories Total weight: approx. 3350 kg Connection to 400 V, Slewing range: 270° Very good condition, fully functional Cjdpfx Aezy D D Rsdhshc Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold. See pictures Shipping via freight forwarder or collection