Used Top Lathe for sale (5,495)

Year of construction: 1998, condition: used, 2 turning diameter max. 250 mm toll turrets 2 x 12 control Fanuc 16 T tool taper HSK 63 Chjdpfsqn A Rgox Adxjd 04800000181 frequency 50 Hz ampere 168 A

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis Chedpfx Aexugdiodxod fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Cjdoxp Hudopfx Adxehd

Condition: ready for operation (used), Year of construction: 1995, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. The machine was only used in a prototype workshop for sporadic applications. Chedpfx Ajxtfx Aedxod Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, 0390 mm 610 mm 54 mm 330 mm Chjdpfxjw In Eps Adxsd 4000 U/min A1-6 DIN 55026 60 mm 140 mm

Condition: ready for operation (used), YEAR OF MANUFACTURE: 1963 (see attached documents for technical data) Swing diameter: 600 mm Turning length: 1000 mm Equipment: - Three-jaw chuck Ø 250 mm - Four-jaw chuck Ø 250 mm - Tailstock center - Quick-change drill chuck MK5 - Documentation Chsdpfx Aexcw Axedxjd

Condition: used, Year of construction: 1969, faceplate diameter s mm Chsdsv Dx Dkopfx Adxsd swing diameter 1000 mm turning height 1000 mm weight of the machine ca. 5 t

Condition: used, Year of construction: 2006, with C-axis with driven tools FANUC 18T-C control turning diameter -380 mm turning length 490 mm Spindle speed -3,500 rpm Upper turret holder with 12 positions, 6 of which are driven Chedpfor E Amgjx Adxsd Tool presetter Chip conveyor

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed rod lathe Make: WEILER Model: COMMODOR Year: 1979 Technical Data Cedpfxext Ngqo Adxshd Manufacturer: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • Röhm 3-jaw chuck, D 200mm • Multifix toolpost • The additional 3-jaw chuck shown on the machine is not included in the scope of delivery! All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm Codjw E Nkiopfx Adxehd -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: good (used), Year of construction: 1984, 6 spindles Tapping with electronic limit stop Hexagonal punching Calibration Pick-up device Many accessories With IEMCA PRA 40/42 F bar loader Includes STEIMEL chip removal, box conveyor, and 24/7 production Chjdpfsv R U D Tsx Adxed

Condition: good (used), Year of construction: 2007, Used CNC lathe from Doosan Type: Lynx 220 Turning diameter: 250 mm Chjdpfxjxpxb Ao Adxjd Turning length: 550 mm Spindle bore: 51 mm X and Y axes 12-position tool turret Fanuc CNC control LNS bar feeder

Condition: used, max. 800 mm turning length max. 800 mm Chodpfjh D Anajx Adxed chuck ohne documentation inkl. weight of the machine ca. 8 t

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/0001/09472, MACHINE SPECIFICATION Distance between centres 635mm Centre height 165mm Swing Swing over bed 335mm Swing over cross slide 209mm Spindle Bored to pass 40mm dia Nose D1-4 Camlock Morse taper in nose N0 3 Width of bedways 231mm Travel Total travel of cross slide 209mm Total travel of top slide 95mm Total travel of tailstock barrel 146mm Speeds Spindle speeds (16) 22-1800rpm Spindle motor 2.25kW MACHINE SPECIFICATION Cont’d Whitworth threads (45) 2-72tpi Diametral threads (21) 8-44 Metric pitches (39) 0.2-14.0mm Module pitches (18) 0.3-3.5 Feeds Sliding feeds 0.001-0.040 ipr/spindle Surfacing feeds 0.0005-0.020 ipr/spindle Tailstock Approx weight 800Kg Machine in Imperial execution MACHINE EQUIPPED WITH 3 jaw chuck Cedpfx Adsxn Iv Texshd Quick change toolpost and 6 off toolholders Ainjest high speed screwcutting attachment Single bedstop 5 Position turret bedstop Apron dial Chuck guard Coolant system Rear splashguard

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm Chjdsxq Hhyjpfx Adxsd turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: excellent (used), Year of construction: 2020, operating hours: 3,349 h, functionality: fully functional, SMEC Samsung Turning Centre Chodpfx Adjxcny Usxsd Model SL4500XY Year 2020 Fanuc Series Oi-TF Control 775 mm swing over bed 630 swing over cross slide Max machining dia – 680 mm Max length to be confirmed – 2000 mm Bar working dia – 117.5 mm X travel 350 mm Chuck size 534 mm SMW Autoblok Type SLU-X-4-ZS Steady Live Tooling – 6 Driven tools Swarf Conveyor The machine is in excellent condition

Condition: excellent (used), Year of construction: 2012, ONLY 8,300 spindle hours! Control: TX 8 i-p MAIN SPINDLE Max. bar capacity: 32 mm Max. workpiece length - Swiss-type operation: 245 mm - Short turning operation: 125 mm Max. spindle speed: 6,400 rpm C-axis SUB SPINDLE Max. bar capacity: 32 mm Max. clamping depth of workpiece: 250 mm Max. spindle speed: 6,000 rpm C-axis UPPER TOOL TURRET Number of stations: 10 All driven Max. speed: 12,000 rpm LOWER TOOL TURRET Number of stations: 9 All driven Max. speed: 12,000 rpm Cjdpfx Adexrf Etjxshd BACK WORKING UNIT Number of stations: 8 Driven stations: 3 (T12, 13 and 14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist filter Bar loader FMB turbo 3-36

Condition: good (used), Year of construction: 2006, Used CNC lathe from Viktor Type: VTurn II 26 Turning diameter: 520 mm X: 240 mm Z: 1250 mm Spindle: 87 mm Y-axis Csdpsxpxafjfx Adxehd C-axis Driven tools Hydraulic steady rest Chip conveyor

Condition: used, Year of construction: 1966, . centre distance 3000 mm max. swing diameter 660 mm multifix . steady 2 Stück weight of the machine ca. 5 t +++++ Chsdpfx Aoh Uytqodxed Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,105 mm, Tooling package  Chip conveyor Samchully 3 chuck 400 mm with jaws Max. turning Ø: 790mm X-Axis: 352mm Cjdpfx Adowyun Aexshd Z-Axis: 1105mm Spindle bore: 116.5mm Speedrange: 2000Rpm Spindle power: 37kW ATC / revolver: 10 Speed live tools:4000Rpm Power live tools:25kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 6Mk Stroke pinole: 120mm Quill Ø: 120mm Workpiece load: 1700 Length: 4600mm Width: 2056mm Height: 2195mm Weight: 11050kg

Condition: used, Year of construction: 1966, turning diameter over bed 330 mm turning dia. in gap 400 mm turning length 600 mm centre distance 750 mm spindle turning speed range 20 - 1000 U/min spindle bore 25 mm Chedpfoxrg Atex Adxsd 3-jaw chuck Röhm, Ø 200 mm dimensions of the machine ca. 2000 x 800 x 1500 mm weight of the machine ca. 1200 kg Fixed bezel Turning bezel Turning center point Three-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jaws Quick-change tool holder Original Multifix size B with 2 change holders Spindle brake Tailstock quill MK3 Machine feet Lathe chuck guard Chip guard Work light

Condition: used, Year of construction: 1977, turning diameter x mm turning length x mm swing diameter over bed slide x mm turning diameter over bed x mm Chedpfxerpa Nyj Adxsd 550mm weight of the machine ca. 1,5 t

Condition: used, Year of construction: 1998, turning length 2000 mm 980507 x-axis 7000 mm z-axis 10000 mm 65 mm Chedpfxsw Syb Ds Adxsd total power requirement 15 kW weight of the machine ca. 3,5 t

Condition: used, Year of construction: 1988, turning diameter 570 mm turning length 2000 mm control ja Chsdpew Syk Sefx Adxjd weight of the machine ca. 3,5 t

Condition: used, Year of construction: 2000, turning diameter over bed 340 mm turning length 190 mm circulation diameter max. 158 mm x-axis 300 mm y-axis 300 mm spindle bore 42 mm Chedpfx Adjw Sybksxsd 2 weight of the machine ca. 2,6 t dimensions of the machine ca. 2200,0 × 1400,0 × 1800,0 m