Used Top Lathe for sale (13,687)

Condition: used, Year of construction: 2007, Tornos Deco Sigma 20 Sliding Head Lathe, Twin Spindle 6 Axes & 2 C Axes, Spindle 1 - Main, Collet Chuck, 10,000rpm Max, 20mm Max Workpiece Diameter, Serviced by 6 Turning Tool Positions, 4 Side Mill/ Drill Positions, 2 Drive Capable, 4 End Mill Positions all Driven, Spindle 2 - Sub, Collet Chuck, 10,000rpm Max, 20mm Part Diameter Max, Serviced by 5 Turning Tool Positions, 2 Mill/Drill Positions Driven, Parts Catcher & Chute, Fanuc Series 31i Model CNC Control, Tornos Robobar SBF-532 Barfeed, 3000mm Max Bar Length, (820kg). S/No. 8277 (2007). Country of Origin: Switzerland Ksdsytgc Djpfx Aalodi Location: These lots are located in Kent, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2011, Tornos Deco Sigma 32 Sliding Head Lathe, Twin Spindle 6 Linear Axes & 2 C Axes, Spindle 1 - Main, Max Work Piece Diameter 32mm, Collet Chuck, 8000rpm Max, Serviced by 6 Turning Tool Positions, 4 Side Mill/Drill Positions - 2 Drive Capable, 4 End Mill/Drill Positions, 2 Turning/Mill/Drill Driven Positions, Spindle 2 - Sub, Collet Chuck, 8000rpm, Serviced by 2 Turning Tool Positions, 4 End Mill/Drill Positions, 2 Turning/Mill/Drill Driven Positions, Max Work Piece Length 110mm, Parts Catcher, Fanuc Series 31i- Model A CNC Control, Tornos Robobar SBF-232 Bar Feed, 3000mm Max Bar Length (820kg). S/No. 10736 (2011) 3550kg. Country of Origin: Switzerland Kdodpfx Aaoytgb Tslsi Location: These lots are located in Kent, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2016, Tornos Evo Deco 32/10 Sliding Head Lathe, Twin Spindle 10 Linear Axes & 2 x C Axis, Spindle 1, 5C Spindle 32mm Max Bar Diameter, Serviced by 6 Turning Tool Positions, 4 Drill/Mill End Bar Positions, All Drive Capable, 6 Side Mill/Drill Postions, 4 Drive Capable, Spindle 2 - Subspindle, ER Collet Type, Serviced by 3 Turning Tool Positions, 4 Mill/Drill End Bar Positions, All Drive Capable, Parts Grabber and Parts Hatch, 8000rpm on Main & Sub, Fanuc 31i-BS CNC Control, 240mm Max Work Piece Length, Tornos Robobar SBF-532 Bar Feed, 3 Metre Bar Length Max, 820kg. S/No. 13366 (2016) 3800kg. Country of Origin: Switzerland Location: These lots are located in Kent, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Kedeytf U Sopfx Aaljdi

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Kdjdpetttigjfx Aaloi Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible .

Condition: good (used), Year of construction: 1990, FOR SALE: BERTHIEZ TFM 160 N Vertical Lathe (Rebuilt) Description: For sale: High-performance vertical lathe from the French brand BERTHIEZ, model TFM 160 N. This benchmark machine, renowned for its exceptional rigidity, is ideal for machining large-diameter, heavy circular parts. History and Maintenance: Origin: Made in France Technical Specifications (Standard BERTHIEZ TFM 160): Table diameter: 1,600 mm Maximum swing diameter: approx. 2,000 mm Ksdpoyr Irqjfx Aaljdi Maximum height under cross rail: approx. 1,500 mm Maximum admissible table load: approx. 10 to 15 tons Type: Vertical lathe with NUM CNC control.

Condition: ready for operation (used), total length: 10,700 mm, total width: 3,700 mm, Beiteldraaibank - met 2 beweegbare beitelgeleiders - voor elektromotoren, pompen, ankers etc. Beweegbare centra Dwarsslede: 500 mm verstelbaar Middenhoogte: 1000 mm (eenvoudig instelbaar) Met Asea-motor 31 kW (variabele snelheid) Distance between centers: 7300 mm Swing over bed: 3400 mm (expandable) Swing in gap: 3400 mm Power on main spindle: 30 hp Number of speeds: 9 -> 27 rpm Chuck (3/4 pinch) -- diametre: Ø 2550 mm Ksdpfxsyru Ewo Aalsdi Max weight between centers: 12000 kg

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: SL375, CNC Lathe XYZ SLX355 ● Condition: Unchecked ● Delivery terms: Free loaded on truck Kedpfoyvi A Tjx Aalodi ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – The pickup period for the equipment is set for 06/05/2026 and 07/05/2026. Unfortunately, collection outside this timeframe cannot be accommodated. ● Payment terms: Advance payment – by bank transfer ● Internal reference number: DÄ5 ● Inspection under power: Yes Technical specifications: ● Control system: PROTO TRAK SLX ● Drive power: 5.5 kW ● Spindle speed: max. 4000 rpm ● Turning length approx.: 750 mm ● Swing over bed approx.: 400 mm ● Swing over cross slide approx.: 180-200 mm Equipment: ● Three-jaw chuck (diameter: 200 mm) ● Tailstock ● Quick-change tool post Scope of delivery: ● Available manuals ● Set of quick-change tool holders with turning tools ● Four-jaw chuck (Röhm, diameter: 160 mm) ● Toolbox with accessories as shown in the images Dimensions & weight: ● Footprint (L x W x H) approx.: 2300 x 1400 x 1900 mm ● Weight approx.: 2000 kg If you have any questions or wish to arrange an inspection, please do not hesitate to contact us! Additional notes: ►Transport to the destination can be offered upon request ►The offer price is net plus VAT ►The equipment is sold with exclusion of any warranty ►Technical data provided without guarantee ►Subject to prior sale ❗Sale exclusively to business customers❗

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Kodpjyuchrefx Aalodi Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1990, Mazatrol T2 diameter capacity: 440 mm spindle speeds: 4500 rpm Kjdpfxjxyh Erj Aalsdi spindle bore: 62 mm

Condition: ready for operation (used), Year of construction: 1984, spindle bore: 37 mm, turning diameter: 360 mm, center width: 750 mm, spindle speed (max.): 3,000 rpm, Visue Newall 2 axes Capacity: 750x360 mm Spindle bore: 37 mm Variable spindle speed up to a maximum of 3000 rpm Kjdpfx Aoyimzvjalsdi

Condition: new, Year of construction: 2026, 0460 mm 1500 mm Kdodpfx Aaeyu U Dxjlei 230 mm 78 mm 400 mm 2200 U/min D1-8 DIN 55029 95 mm 145 mm

Condition: new, Year of construction: 2026, 0330 mm 210 mm 0635 mm 167 mm 40 mm 2,2 kW spindle turning speed - stepless 30-3000 U/min Ksdpsyu U Drsfx Aalodi

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Ksdsyu N Uxepfx Aaledi

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed with air knives with pressure roler Ksdpjyrdy Djfx Aaledi belt width 1000 mm dimensions (l x w x h) : ± 2.800 x 1.850 x 2.500 mm

Condition: used, total length: 3,900 mm, total width: 1,500 mm, total height: 1,600 mm, Empty weight: 2.940 kg Price: On request - Documentation available: Yes - └ Type Documentation: Operating system, Technical data, Electrical diagrams, Parts book - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 335 - Swing over bed [mm]: 630 - Distance between centres [mm]: 2000 - Bed width [mm]: 455 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Four-jaw chuck, Removable bed, Fixed steady, Three-jaw chuck - Transport dimensions: 3900mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 2940kg - Transport packages [pcs.]: 1 Kdsdpeytn Eyefx Aalsi Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,600 mm, total length: 5,000 mm, total width: 1,600 mm, Empty weight: 3.190 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Removable bed - Swing over removable bed [mm]: 900 - Type of digital readout: 2 assen - Control: Conventional - Transport dimensions: 5000mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 3190kg - Transport packages [pcs.]: 1 Kdsdpfewnitisx Aalei Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 280 mm, WEILER MATADOR VS2 Kedsytd U Rjpfx Aalodi Weiler Matador VS2 lathe in very good condition from an educational institution, year of manufacture 1991, original paintwork, with Heidenhain digital readout and accessories. Technical specifications: * Machine number 91-102 * Centre height 140 mm * Distance between centres 500 mm * Speed: 15 / 3550 rpm * Spindle bore 36 mm * Spindle nose DIN 55027 -5 * Tailstock MK 3 * Automatic feed from 0.012 to 0.9 mm/rev * Thread cutting capability: metric, inch, module, and diametral pitch threads * Metric thread pitch from 0.25 to 12 mm * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * 3-jaw steel chuck * Motor with brake * Multifix quick-change toolpost with 4 holders * Drill chuck * Rotating centre * Change gears * Electronic spindle protection * Machine manual in German.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 320 mm, turning length: 650 mm, spindle bore: 40 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, WEILER PRAKTIKANT 160B Weiler Praktikant 160B lathe in excellent condition, with many accessories. Year of manufacture: 1993. Technical specifications: * Machine year of manufacture: 1993, Machine number: 160 3471 * Centre height: 160 mm * Distance between centres: 650 mm * Speed: 16 steps, 48 / 2500 rpm * Spindle bore: 40 mm Ksdpfx Aoytd Uksalsdi * Spindle head: DIN 55027 5 * Tailstock taper: MK 3 * Automatic feed from 0.02 to 0.63 mm/rev * Capable of metric, imperial, module, and diametral pitch threads * Metric thread pitch from 0.25 to 8 mm * Switchable spindle brake * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * Several collets * 3-jaw steel chuck Rhom with 2 sets of jaws * 4-jaw chuck * Multifix A with 4 holders * Bed stop * Fixed centre * Change gears * Machine feet * Machine manual in German.

Condition: new, Year of construction: 2026, 0390 mm 240 mm 1250 mm 190 mm 54 mm Kdodpfx Aajwp Ti Djlei 5,5 kW

Condition: used, Year of construction: 2015, bed width 350 mm turning length 1.000 mm control Manual plus 620 Heidenhain greates pass round over bed 430 mm Swing dia. over traverse guideway 220 mm turning speed range - main spindle 1 - 3.600 min/-1 power capacity - main spindel 9 / 11 kW Kodpfoyvkr Aox Aaledi max. Torque ca. 200 Nm spindle head DIN 55027 / 6 spindle diameter in front bearing 110 mm spindle bore 80 mm usable bar diameter max. 80 mm System MultiFix Shank diameter 20 x 20 mm x-axis 230 mm z-axis ca. 1.000 mm diameter of quill 70 mm quill stroke 150 mm taper of center MK 5 hollow fix: 12 -150 mm hollow var: 12 -125 mm rapid traverse X: 10 / Z: 7 m/min feed power X: 4 / Z: 5 kN weight of the machine ca. 3,2 t dimensions of the machine ca. 2,8 x 2,1 x 1,9 m Lathe cycle controled SEIGER - SLZ 420 E / 1000 - WITHOUT three-jaw chuck - Impulse lubrication Flow rate: 0.1 l/min, Pump pressure: 30 bar, Tank capacity: 2 dm³

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2006 Mori Seiki NL2000Y/500 CNC Lathe with Y-Axis and live tooling. Plastics-only medical device use. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2006 Location: Ireland Availability: Immediate Machine Overview Available now from Used Machine Tools Ireland, this 2006 Mori Seiki NL2000Y/500 CNC Lathe is presented in excellent working condition with a very clean operational history. The machine was used exclusively for machining plastics by a medical device manufacturer, resulting in: Minimal spindle and guideway wear Clean internal condition Long remaining service life Unlike many plastics-only machines, this example is fully equipped with coolant, making it immediately suitable for both plastic and metal machining applications. The NL2000Y/500 is widely regarded as one of the most capable and reliable Y-axis CNC lathes in its class, featuring Mori Seiki’s renowned BMT turret technology for rigidity, accuracy, and thermal stability. Key Features & Highlights Y-Axis CNC Lathe – complex milling and turning in one setup Live Tooling (6,000 RPM) – drilling, tapping, and milling capability BMT (Built-in Motor Turret) – exceptional rigidity and precision Plastics-Only Medical Use – exceptionally low wear Full Coolant System Installed Coolant Tank Capacity: 235 Litres Tailstock & Workpiece Unloader – production-ready configuration MSX-850 III Control – powerful and reliable Mori Seiki control Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis Travel: 260 mm Z-Axis Travel: 590 mm Y-Axis Travel: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Number of Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Max Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Tailstock Taper: MT4 Live Centre Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Kdjdpfx Aoyhqmpoaloi Coolant System Coolant Equipment: Yes Coolant Tank Capacity: 235 Litres Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial driven toolholders ✔ Selection of radial driven toolholders ✔ Selection of static toolholders Additional Notes Used exclusively for plastic machining in a medical device environment Fully equipped with coolant equipment, suitable for plastics or metals Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Precision plastic machining CNC turning & milling with Y-axis Aerospace, electronics & high-precision components

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition. Plastics-only medical device use. Y-Axis, live tooling, tailstock, workpiece unloader. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2009 Location: Ireland Availability: Immediate Machine Overview We are pleased to offer this 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition, available exclusively through Used Machine Tools Ireland. This machine was used only for dry machining of plastics by a medical device manufacturer, meaning: No heavy metal cutting No coolant contamination Exceptionally low mechanical wear The Mori Seiki NL Series is globally recognised as a benchmark for high-precision CNC turning, and the NL2000Y/500 is especially sought after due to its Y-axis capability, live tooling, and BMT (Built-in Motor Turret) design. Key Features & Benefits Y-Axis CNC Lathe – complex milling and turning in one setup BMT Turret Technology – superior rigidity, accuracy, and thermal stability Live Tooling up to 6,000 RPM – ideal for milling, drilling, and tapping Medical / Plastics-Only Use – extremely clean operating history Tailstock & Workpiece Unloader – ideal for automated production MSX-850 III Control – powerful, reliable Mori Seiki control system Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis: 260 mm Z-Axis: 590 mm Y-Axis: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Taper: MT4 Live Centre Automation Kjdeyhqkzjpfx Aaledi Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial & radial driven toolholders ✔ Selection of static toolholders ✔ Extraction unit for plastic machining Additional Notes Used exclusively for dry plastic machining No coolant system fitted, however the machine is prepared for coolant installation Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Plastic & polymer machining Precision CNC turning & milling Aerospace, electronics & high-tolerance components This Mori Seiki NL2000Y/500 CNC Lathe represents a rare opportunity to acquire a premium Japanese turning centre with an exceptionally clean usage history.

Condition: used, total length: 2,500 mm, total width: 1,150 mm, total height: 1,350 mm, Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 260 - Swing over bed [mm]: 520 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 1000 - Bed width [mm]: 370 - Spindle bore [mm]: 60 - Min. spindle speed [rpm]: 16 - Max. spindle speed [rpm]: 2000 Kedpfx Aoytgz Tsaljdi - Options: Quick-change tool post, Three-jaw chuck - Transport dimensions: 2500mm x 1150mm x 1350mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 3,400 mm, total width: 1,100 mm, total height: 1,400 mm, Empty weight: 4.000 kg Kodpsytghaofx Aaledi - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 365 - Swing over bed [mm]: 725 - Carriage turning diameter [mm]: 400 - Distance between centres [mm]: 1600 - Bed width [mm]: 500 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 16 - Max. spindle speed [rpm]: 1250 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3400mm x 1100mm x 1400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Kdodpfx Asq Atxyealei Interlocked guarding