Vertical lathe

GILDEMEISTER CTV 250

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Z-axis: 300 mm, chuck outer diameter: 250 mm, spindle bore: 79 mm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 800 mm Travel in Z-axis: 300 mm Chuck diameter: 250 mm Spindle head: 170 h5 Spindle diameter at the front bearing: 120 mm Spindle bore: 79 mm Number of tool stations: 12 EQUIPMENT C-axis Todpfx Ajzpxf Uef Rea

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm Tsdew S Efzopfx Af Rsa tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min Tsdpsmcibwofx Af Rea spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) *

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Tedpfx Aszi R R Nof Rja Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: refurbished (used), machine/vehicle number: 4507, Rectificadora sin centros ESTARTA 327 CNC Tjdeg Ix Hmjpfx Af Rsa

Condition: ready for operation (used), Year of construction: 2001, operating hours: 42,400 h, functionality: fully functional, machine/vehicle number: 0680 0000521, travel distance X-axis: 800 mm, spindle speed (max.): 5,000 rpm, turning length: 300 mm, spindle bore: 79 mm, controller model: Siemens 840D, TECHNICAL DETAILS Turning length: 300 mm Travel distance X-axis: 800 mm Travel distance Z-axis: 300 mm Speed range, main drive: 20 - 5,000 rpm Speed range, C-axis: 0 - 100 rpm Spindle bore: 79 mm Torque, main drive: 200 Nm Torque at the spindle: 240 Nm Torque, clamping device: 28 Nm Rapid traverse rate, X-axis: 100 m/min Rapid traverse rate, Z-axis: 45 m/min Tools and tool magazine Number of tool magazine positions: 12 Speed of driven tool, max.: 6,000 rpm Tool interface: VDI 40 Clamping area in the working area (W x H): 340 x 430 mm Number of T-slots according to DIN 650: 7 MACHINE DETAILS Todpfx Ajzb Efgof Rja Control model: Siemens 840D Power, main spindle: 27 / 20 kW Total power requirement: 50 kVA Electrical version - voltage/frequency: 3~ / 400 V / 50 Hz Interface: yes Spindle operating hours: 42,400 h Total operating hours: 93,728 h Dimensions & Weight Machine dimensions (L x W x H): 3,200 x 3,950 x 2,800 mm Chip conveyor dimensions (L x W x H): 3,400 x 1,150 x 2,180 mm Machine weight: 8 t EQUIPMENT High-pressure coolant system (capacity: 500 l) Chip conveyor with oil mist separator / industrial filter IFM 1000CTV Workpiece loading and unloading device with 20 stations Hydraulic chuck (225 mm) Hydraulics 6x various turning tool holders 2x various tool holders (driven)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 61,440 h, functionality: fully functional, machine/vehicle number: 06800003891, rotational speed (max.): 5,000 rpm, controller model: Siemens 840D powerline, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Max. speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D powerline Electrical Data Apparent power: 50 kVA Rated current: max. 72 A Current: 80 A Mains voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Voltage: 24 V Operating hours: approx. 76,300 h Spindle hours: approx. 61,440 h EQUIPMENT Pallet circulation system Material conveyor belts for machined parts Chip conveyor Documentation/manual Tjdpsyzqtksfx Af Rea Note: The machine is sold without chuck, tools or raw part holders. Additionally, the seller can offer the following accessories: SMW KNCS225 chuck for €1,500 Ewab pallets (base pallets) 10 units for €500 Extension of transport belts for finished parts €2,000 Basic holder set VDI 40 suitable for the machine, 10 units for €1,000

Condition: used, Year of construction: 1996, Technical details: grinding diameter: 1,5 - 75 mm grinding wheel diameter: 400 mm grinding wheel width: 160 mm work stroke: 0 - 1 mm working feed: stufenlos/ continous mm/min grinding wheel speeds: 1300 U/min Tsdpfx Afsu Ngyze Roa control for program: Num 1020 GC total power requirement: 14 kW weight of the machine ca.: 3,8 t dimensions of machine: 3,0x2,2x2,2 m dimensions electric cabinet LxWxH: 1,5x0,4x2,0 m CIRCULAR GRINDING MACHINE - alloyed round steels as well as (grooving process) throughfeed process. - In the plunge process, the plunge-cut length is max. 160mm. - Workpiece removal automatically via rail (its function or operation is not known to WMW AG) - grinding wheel with reshaping device, speed = 1300 rpm. - regulating grinding wheel with reshaping device, infeed angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system accessories: various grinding and regulating wheels on request The machine is operating in manual mode! The control is in the Catalan language and none of our employees can control the machine or understand the language. *

Year of construction: 2002, condition: ready for operation (used), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible. Tjdpeubyy Nsfx Af Rea

Year of construction: 2010, condition: ready for operation (used), Turning machine Tsdei Ewq Sepfx Af Roa CTV 250 - R Manufacturer: DMG Gildemeister Serial number: 6860000451 Operating hours: 46,491 Spindle hours: 30,748 Footprint: 4m x 3m Optional cooling unit for connecting two CTV 250 machines

Condition: like new (used), Year of construction: 2013, measuring range X-axis: 1,600 mm, measuring range Y-axis: 4,200 mm, measuring range Z-axis: 1,500 mm, workpiece weight (max.): 5,000 kg, Equipment: type plate available, CARL ZEISS CNC coordinate measuring machine ACCURA II MASS 16/42/15 Year of manufacture: 2013, Overhauled: 2025 Measuring range: X = 1600 mm, Y = 4200 mm, Z = 1500 mm Control system: C99 SR VII Control panel: BP26_SE Sensor: VAST XT GOLD and RDS-CAA with VAST XXT Probe changing magazine: Multi Sensor Rack MSR Automatic temperature compensation Accuracy: VAST XT GOLD / RDS-CAA XXT MPE-E 3.6+L/300 4.9+L/200 R0 2.4 5.5 MPE-P 3.6 4.9 MPE-THP 3.7/68sec 4.7/68sec RONt 3.5 5.5 HP Z4 WIN11 workstation with 27" monitor Calypso Basic, current version Any further option possible Accessories: Calibration sphere Exchangeable probe tips XT and XXT Exchangeable magazine slots Tjdpjydnzcjfx Af Rja Probe accessories Documentation Further accessories