Used Tool Cabinet With Drawers for sale (40,330)

Condition: used, axle configuration: 3 axles, first registration: 07/2008, total length: 13,500 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R 17.5, wheelbase: 9,010 mm, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tire size: 245/70 R 17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tire tread depth left inner: 10%; Tire tread depth left outer: 10%; Tire tread depth right inner: 10%; Tire tread depth right outer: 10% Rear axle 2: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 3: Twin tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Weights Unladen weight: 13,220 kg Payload: 31,780 kg GVW: 45,000 kg Functional Loading platform height: 90 cm Condition Damage: None Identification Fsdpfx Aijz Dkm Djvepn License plate: OK-70-LB

Year of construction: 2001, condition: used, machine/vehicle number: 2001/1558B, Brand: PANEM Model: AC24B Year: 2001 Serial number: 2001/1558 B Power source: Electric Power supply: 230 V single-phase Frequency: 50 Hz Electrical power: 1.1 kW Capacity: 24 trays / grids Tray sizes: 400 × 800 / 400 × 600 mm Number of access doors: 2 Digital electronic control panel on the front Humidity generation via a steam generator Interior: Stainless steel Front: Stainless steel Door: Stainless steel Dimensions: 635 × 1200 × 2250 mm Controlled fermentation Used PANEM AC24B fermentation cabinet 400 x 800 – 24 trays and 2 access doors General presentation The PANEM AC24B fermentation cabinet is equipment designed for controlled fermentation in bakeries. This used unit, manufactured in 2001, offers a capacity of 24 trays in the 400 x 800 mm format and a two-door configuration. With its dimensions of 635 x 1200 x 2250 mm, this controlled proofing cabinet combines a compact width with a capacity suitable for production organized on trays. The available documentation also indicates compatibility with 400 x 600 mm trays. Why this model stands out Fedpfx Aoz Ar A Hjivepn The PANEM AC24B brings together several useful features in a bakery environment: an enclosure with a stainless steel interior, a stainless steel front and door, humidity generation via a steam generator, and a digital electronic control panel located on the front. Its 230 V single-phase power supply and indicated electrical power of 1.1 kW are important data points for verifying its compatibility with the laboratory's electrical installation before it is put into service. Key advantages Capacity of 24 trays suitable for working with 400 x 800 mm trays Two-door configuration to structure access to the enclosure Humidity generation ensured by a steam generator Digital electronic control panel accessible on the front Stainless steel interior suitable for the maintenance requirements of a production environment 230 V single-phase, 50 Hz power supply Detailed technical specifications

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 01/2014, loading space length: 12,300 mm, loading space width: 2,460 mm, loading space height: 2,690 mm, suspension: air, tire size: 265/70R19.5, color: green, Year of construction: 2014, = Additional options and accessories = - Air suspension = Notes = Ekeri 2-axle box with side doors - Zepro load lift - Steering axle Year of manufacture: 21-1-2014 YF2C28SKAEKN32079 Box: 12.30 - 2.46 - 269 Zepro load lift Side doors open Steering axle = Additional information = Tire size: 265/70R19.5 Axle brand: SAF Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 9000 kg; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Dual tires; Max. axle load: 9000 kg; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% GVWR: 36,000 kg Technical condition: good Visual condition: good Fodpfxoz D Eucj Aivjpn

Condition: used, Punching bracket, punching unit SUPRA-CLAP type C7 300 Throat depth: 300 mm Punching capacity: max. 2 mm material thickness Hole diameter: Ø 2 to Ø 7 mm Distance between lower die and punch holder: 7 mm Distance between upper and lower bracket: 12 mm Punch shank: Ø 7 mm Die outer diameter: Ø 20 mm Die thickness: 12 mm Pass-through opening in punching bracket: 11 mm Installation height: 142 mm - Standard punch length 70 mm with 60° head - Equipped with a round hole punch approx. Ø3 to 4 mm - Punch holder with stripping spring and return spring Fedpfx Aexbh N Heivspn - Mounting slot 50 x 14 mm and 8 mm locating pin Dimensions punching bracket L x W x H: 390 x 26 x 145 mm Weight: 3.7 kg Good condition 13 pieces available, price per piece

Condition: used, Safe - Security Cabinet - Fireproof Safe LIPS presumably a data protection cabinet Internal dimensions: W=1080 mm, H=1500 mm, D=440 mm Presumably provides 120 minutes of fire protection - 2-door - Interior with 2 shelves - Internal door for enhanced fire protection - Bolt mechanism with 3-sided locking - Key lock with one key Fpodpfxjxcivke Aivon External dimensions: W=1400 mm, D=720 mm, H=1850 mm Weight: approx. 600 kg in good condition

Condition: used, Year of construction: 2018, Used angle unit for Holz-Her CNC machining centers Year of manufacture: 2018 Fjdpfxozk Nluj Aivspn Features and technical specifications: - HSK 63 F tool holder - With torque support - With 2 horizontal tool spindles - Suitable for mounting a CLAMEX grooving tool as well as a saw blade Technical Specifications: - Max. drive speed: 8,000 rpm - Max. output speed: 12,000 rpm - Permissible operating temperature: 85° - Unit can be swiveled 360° around the drive axis - Sound level: 80 dB(A) Weight: 3,257 kg Availability: Immediate Location: Röllbach

Condition: used, System 68, 78, 80, 92 IV Number of tools 4 St. Bore 50 mm Used Leitz window tools, Zuani IV 68, 78, 80, 92 Sale on behalf of our customer ----- Window cross-sections attached as a PDF! Due to modifications, some tools are older than those shown in the attached window cross-sections/drawings. Tools are sold in their current condition, in the quantities shown and with accessories as available. Note regarding window cross-sections, tool drawings and tool system listings: Engelfried accepts no liability for the actual tools being consistent with the systems mentioned and shown in the drawings. Fedpezughnjfx Aivspn ----- (Technical specifications as per the customer – subject to change!) All prices quoted are net, plus statutory VAT.

Condition: excellent (used), SK 50 holders 60 pieces (28529) Fpodpot Uztljfx Aivon Weight 275 kg

Condition: excellent (used), Rotary cutting tool with rotating cutting insert Fpsdpjd Hflaefx Aivsn Type: RRSDR 3232P12 Manufacturer: Mitsubishi Length: 165 mm

Condition: excellent (used), Year of construction: 2021, Great opportunity to buy an outstanding universal turning center (milling and turning) including automation with the Robo2Go: a flexible workpiece loading and unloading system with a six-axis-industrial-robot. The CLX 450 TC was built in 2021 and first used for actual production in 2022. About 9300 operating hours and only 3800 spindle hours. The Robo2Go was built in 2018, but is actually 'like new', because it was barely used. CNC control Celos X with SIEMENS Sinumerik One Max. turning diameter 400 mm Turning length 1100 mm Bar capacity max. 65 mm X-axis travel 276 mm Z1-axis travel 755 mm Z3-axis travel 775 mm Y-axis travel +/- 100 mm B-axis travel +/- 120° Tool holder HSK-T 63 Tool changer 60 positions Additional 1,000L coolant tank with programmable pressure 80-bar through-spindle cooling 60-tool tool changer Safety fence around robot Please check the full technical specifications and options in the attached documents. Fpsdpfsz Eg H Aex Aiven Optional: Large set of HSK-63 toolholders (without the inserted tools) The machine can be viewed in operation upon appointment. More pictures and videos available on request.

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Fsdpfx Aiszcgh Esvepn Weight: approx. 115 kg For further dimensions see pictures

Condition: used, 1x bending knife from a VOEST press brake Fpedpfjy Tbvmox Aivsn Length: 4050 mm Weight: approx. 120 kg For further dimensions see pictures.

Condition: used, Univ. Universal milling machine TOS, type FN 32 Year of manufacture: approx. 1980 Travel distances: X: 450 mm, Y: 240 mm, Z: 380 mm Table size: 700 x 300 mm Spindle mount: SK 40 - M16 Spindle speed: 63-2000 rpm, 18 steps Feed rate: 8-400 mm/min, 18 steps Rapid traverse rate: approx. 1400 mm/min Tailstock travel: 90 mm Main spindle motor power: 2.2 kW Connection power: 400 Volt, 50 Hz - 2-axis digital display Heidenhain, type 731B for the X and Y axes - Vertical milling head with boring quill, swiveling +/- 90° and horizontally extendable - Spindle speed via 18 gear stages - Coolant system in the machine base - Electrical control cabinet on the side of the machine - Fixed angle table - Support for horizontal milling - Keyway broaching attachment, 16 to 105 strokes, stroke up to 70 mm, swiveling +/- 90° Fedpfez Ebu Ujx Aivspn - 1 piece tool holder SK 40 with slitting cutter - Control cabinet located beside the machine Space requirement L x W x H: 1500 x 1200 x 1970 mm Weight: 1650 kg Good condition

Condition: used, Technical details: Heating: 15 kW rated current: 28 A Heating capacity: 15 kW current: max.71 A cooling water consumption: 11 l/min frequency range: 10-25 kHz frequency range: 50/60 voltage: 400-480 +-10% V current- max.: 3020 A weight: 406 kg Fsdpfx Ajxfvldsivepn dimensions L x W x H: 1,25 x 0,8 x 1,6 m The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Preheating for welding processes Soldering and shrinking applications Heat treatments (e.g., tempering or hardening of smaller components). Due to its frequency range of 10–25 kHz, the device is more suitable for medium to large workpieces, as the penetration depth at these frequencies is higher than with high-frequency systems. *

Condition: used, Year of construction: 2016, operating hours: 12,019 h, 2016 | Liebherr A 918 Litronic with Tiltrotator | Used Wheeled Excavator | 12019 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 89900 or Make an Offer. Fjdpoz E Hn Tsfx Aivopn Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 50 approved ✅ 3 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: fully functional and good maintenance despite high mileage 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41270 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Walter HMC 500 WWM 5-axis tool grinding machine A-axis: 750 mm X-axis: 290 mm Fpsdpfsz E N Upjx Aiven Y-axis: 320 mm Z-axis: 660 mm Tool diameter: 200 mm The machine is equipped with linear scales on 3 axes.

Condition: excellent (used), Year of construction: 2014, operating hours: 12,340 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 8,100 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 20 m/min, travel distance X-axis: 380 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 280 mm, grinding spindle motor power: 14,000 W, table length: 500 mm, table width: 330 mm, input voltage: 400 V, CNC Tool grinding machine SCHNEEBERGER Gemini DMR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC 31i B5 Software installed: Quinto Qg1 Colour touchscreen: Yes Number of axes: 5 Stroke X axis: 380 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis: 300 [mm] Max. Stroke speed Y axis: 5000 [mm/min] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 280 [mm] Max. Stroke speed Z axis: 20000 [mm/min] Resolution Z axis: 0.0001 [mm] Table length: 500 [mm] Table width: 330 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 14 [kW] Max. diameter grinding wheel: 250 [mm] Internal workpiece spindle nose: ISO 50 Number of running hours: 12340 [h] Supply voltage: 400 [V] Rated current: 63 [A] Weight: 8100 [Kg] EQUIPMENT INCLUDED: x1 8-position grinding wheel changer x8 coolant supports x1 tool probe x1 FANUC LR Mate 200iC 5L 6-axis tool-loading robot x1 set of robot grippers x1 pallet for robotic tool loading/unloading x3 HEIDENHAIN linear scales on the X, Y and Z axes x1 electrical cabinet air-conditioning unit x1 spindle chiller x1 fire suppression system (to be inspected by the buyer through a qualified organization) x1 set of 4 lifting brackets x1 set of technical manuals x1 parameter backup on USB flash drive *The SCHUNK collet holder and the 2 grinding wheel holders shown in the photos are not included Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening/grinding tools such as milling cutters, taps and drills. Fpsdpfx Aoz Hcg Ieiven Machines similar to the following brands: Blohm, ELB, Ewag, Favretto, Fenix, GER, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer and Walter. Also consider cylindrical and surface grinding machines, lathes, machining centres and milling machines.

Condition: used, Robust measuring tool cabinet with 5 pull-out drawers. Drawer 1: Caliper with gear tooth measurement, 50-75 mm Fedpez Hmrhefx Aivopn Caliper, 5x, 0-25 mm Caliper, 2x, 25-50 mm Drawer 2: Caliper, 2x, 50-75 mm Caliper, 1x, 100-175 mm Caliper, 1x, 225-250 mm Drawer 3: Caliper, 6x, larger than 75 mm Caliper, 4x, with dial indicator Caliper, 1x, 225-250 mm Drawer 4: Calipers, 7x, up to 75 mm Drawer 5: Calipers, 5x, 0-150 mm Calipers, 2x, 0-300 mm 1x Measuring tool cabinet, 50x50 cm, height 90 cm

Condition: used, Year of construction: 1999, functionality: fully functional, machine with 65mm bar passage C-axis with double turret (upper turret motorized) tailstock bar feeder interface FANUC CNC year 1999 CE standards complete with manuals and tool holder set. Spindle Speed 0-4,000 rpm Spindle Diameter 200 mm (160 mm) X-axis Travel 235 (195+40) mm Z-axis Travel 500 mm Maximum Turning Diameter over Bed 680 mm C-axis 0.01° Fjdpfoz Hn A Usx Aivspn Turret 12 + 8 Tools Rapid Traverse X 18 m/min Z 24 m/min Number of Tools 12 M + 8 Motorized Tools YES on the upper turret Tool Change Time 0.7 sec Machine Weight 6,500 kg Dimensions (length x width x height) 4000 x 2200 x 2300h

Condition: good (used), Available in various designs, such as round, hexagonal, or square, and in smooth, cross-ribbed, or with longitudinal and transverse ribs. Fpedez Hmp Hopfx Aivsn You can find an up-to-date list of available new and like-new SK32/SK42/SK52/SK65/SK80/SK100 chucks on our website. We look forward to receiving your inquiry. STALEX Werkzeugmaschinen GmbH

Condition: good (used), mileage: 611 km, color: orange, lifting height: 6,500 mm, Year of construction: 2006, operating hours: 4,225 h, Field of application: Construction CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Fedpozmfv Ujfx Aivepn Production country: DE Please contact Vink Machinery for more information Boki Kiefer HY1251 with Palfinger PK 2700 A * 2006 * Diesel * 4225 working hours * 611 kilometers * 6.5 meters hook height * 5 meters horizontal range * Load moment 2.6 tons/m * 2370 kg own weight * equipped with tipper body * including crane book and other documents

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm Fodpjuhm E Sofx Aivspn - RATED POWER CONSUMPTION: 550 W

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. Fpsdpfxevgnttj Aivsn - Hydraulic shears. - Arm spreader. - Hydraulic pump.

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill travel distance: 100 mm, table length: 800 mm, overall weight: 1,500 kg, space requirement width: 400 mm, Tool Milling Machine EMCO FB-4 NC TECHNICAL DATA: - Year of manufacture 1999 - X 450 mm - Y 300 mm - Z 350 mm - Control PROTO TRAK A.G.E. 2 - Spindle speed 50 – 2 500 rpm - Table size 800 x 400 mm - Spindle taper SK40 - Quill 100 mm - Swivel head ±90° - Ball screws - Machine dimensions 1.5 x 1.5 x 1.7 m - Weight approx. 1 500 kg Machine in very good technical condition, connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale. Fodpfxez Hldpe Aivepn

Condition: excellent (used), functionality: fully functional, tool type: Capto C4, Offer: Like-new turning tool holder VDI40 turning tool holder – holder shank CAPTO C4 Fpjdpfjzrmvgsx Aiven Manufacturer: SANDVIK COROMANT Type: VDI40-CAPTO C4 Shank: Ø 40 mm ----- The offer includes: Pos. 1 → No.: 1405 = 1 x VDI40 steel holder shank C4, No. C4-RC2040-51030 Weight/piece G: approx. = 4 kg Special individual price net: €320/piece, excluding turning holder ----- The integrated C4 insert holder is not included in the scope of supply. If you would like the turning holder included, an additional €100.00 will be added. ----- The item is in like-new, inspected condition.