Used Tool Turret for sale (37,499)

Condition: good (used), 8-position tool turret, manually indexable, for retrofitting 8 x turning tool holders 8 x drilling tool holders Dcedpswg Rv Njfx Aa Hjl Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Year of construction: 1992, condition: used, 2. Tool turret, manufacturer: SAUTER, type: 0.5.480.525 with 8 positions, VDI 50 tool holders with control unit EK 400 Used on vertical turning machines. Djdedg Tixjpfx Aa Hocl

Condition: new, functionality: fully functional, Thick turret punch tool for Amada, Lvd, Finn-power, Euromac, Yawei, JFY Original style punch compatiable for Amada/Mate guide holder Quick adjustable style compatiable for Mate/Wilson 90 guide holder Standard shape as Round, rectangle, Square, Ob-long, triangle Special shape, emboss tool, countersink tool, lance & form tool, bridge tool, louvre tool, blank out tool, dimple tool, etc. Dcedpfxeiq Di Ao Aa Hsl

Condition: new, Cluster tool for Trumpf punch Dcsdpoiq Dmxofx Aa Hsl

Condition: new, Cluster tool C/D/E station thick turret punch tool for Amada, Lvd Original style punch compatiable for Amada/Mate guide holder Dsdpoiq Dmmofx Aa Hecl quick adjustable style compatiable for Mate/Wilson 90 guide holder

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Dodpfjxxb Rrjx Aa Hecl Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, The TOOLTEMP company is selling TT-157e temperature control units. All units have been fitted with new filling and cooling valves. The price is per unit. Djdpfezxa Nysx Aa Hscl Medium: Water, max. 90°C Microprocessor controller MP-694 Heating power: 9 kW, manual stepped control 3/6/9 kW Cooling power: 18 kW Filling volume: 6 liters Connections: Heating circuit R1/2" internal thread; cooling water R3/8" external thread L/W/H: 600 mm x 230 mm x 600 mm Weight: 47 kg

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm Dedpsy Nd Siefx Aa Hecl turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: excellent (used), Tool shelving unit Length 1940 mm Width 660 mm Djdpfx Aszrtpyoa Hscl Height 1750 mm 8 shelves per side

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Dcodjzr Ha Eepfx Aa Hjl

Condition: used, functionality: fully functional, There are several Tool-Temp controllers for sale Dcsdpfx Asv E Uiroa Hel

Condition: used, Used temperature control unit Item number: 10636 Make Tool-Temp Up to 90°C Total height 720mm Dsdsuuacfepfx Aa Hocl Overall length 730mm Total width 300mm

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Tool-temp TT-137 Tool Tempering Unit, 2018, heating: 12 kW, temperature: 140°C Stock: 3 units Dcedezab S Hspfx Aa Hjl

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Dsdpfx Aezqbmdea Hscl Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, Manufacturer: TOOL TEMP Dcedsylaatjpfx Aa Hjl

Condition: used, diameter div. Dodpfxeww Nb Eo Aa Hecl number 36x tool adaptor BT 40

Condition: used, diameter div. number 40x tool adaptor BT 40 Djdpfx Ajww Nbxea Hscl

Condition: used, diameter div. number 40x Dcodpfx Aasww Nbfe Hjl tool adaptor BT 40

Condition: used, diameter div. number 56x Dcedpfx Ajwtrzysa Hjl tool adaptor BT 40

Condition: used, diameter div. number 16x tool adaptor SK 50 Dcedpfxowtrzto Aa Hjl Tool Package DS SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Dedpfx Ajy Suavja Hjcl

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Dcedpjy St Ursfx Aa Hel

Year of construction: 2025, condition: new, functionality: fully functional, Type: TT-108’000 Year: 2025 Operating hours: 0 h (Machine is brand new) Dcodpfx Aozhpdloa Hel For sale due to an incorrect purchase. Ready for immediate delivery.

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Dcsdpsvzb Nqjfx Aa Hol Medium - water Power: 9850 Watts The device has: - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Dodpfx Aoxni Iqja Hecl Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.