Used Cupboard With Drawers for sale (1,020)

Condition: new, 6 St. 100 kg range L-W-H 705 x 736 x 1019 mm weight 126 kg Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% - Usable dimensions inside: 600x600 mm - lockable Hsdpfx Aajw U U Rfecsfn

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit. Hsdpfxsxk U I Ue Aacsfn

Condition: as good as new (ex-display), *Special stock sale* Undercounter freezer -15/-25C with 4 doors. Can also be converted into a cooler +2 / +7C For connection to the central cooling system including control!!! Exhibition unit - has never been used commercially. The new price is approx. 6.100 + 2.400 (cooling drawers) = 8.500Eur External dimensions in mm (W x D x H): 1,200 x 660 x 700 Gross capacity: 420 l Net capacity: 348 Hjdpfxovfqq So Aacjfn for GN 1/1 for deep-freezing / refrigeration / storage of meat, vegetables and drinks suitable for installation refrigeration and defrost water line, protected in the rear wall Energy-saving 24 V fan, protected in removable CNS fan housing, fan speed adjustable Basic equipment without worktop 4 x full door, CNS, flush door and drawer leaves, self-closing, hinge for door opening position (60°, 90°, 120°, 180°), frame heating, CNS handle strip, door hinge left / left / right / right, magnetic seal (can be changed without tools) Usable door height in mm: 520 Variation carcass for individual combination of GN 1/1, GN 2/1 and built-in elements in various sizes (½, ⅓, ⅔), can be changed at a later date without great effort, plugged-in drawer crossbars and drawer guides (for drawers) can be removed without tools Interior with rounded corners, base tray, stepped, removable condenser filter, suitable for cleaning in the dishwasher IDEAL AKE control 2.4″ touch display LCD touchscreen, evaporator fan control, ECO mode, time change for night mode, multilingual Automatic defrosting (hot gas), defrost water tray with dirt deflector, removable, dishwasher-safe, automatic defrost water evaporation Machine compartment on the right, W in mm: 250, removable condensate tray, suitable for cleaning in the dishwasher, machine can be pulled out completely for maintenance / cleaning, wiring / components easily accessible Evaporator, 4D air flow between drawer and drawer basket, protected in CNS housing, 45° swivel, with special duplex coating, maximum corrosion protection in salt spray test according to DIN EN ISO 9227 for further data see photos!

Condition: ready for operation (used), 4 telescopic drawers, size: 450 x 600 mm Height-adjustable drawers, currently for filling heights: 100, 120, 250 and 320 mm Required space: 720 x 550/750 x 1170 mm Hfodpfx Aajixzzrscon

Condition: excellent (used), 2x Hahn+Kolb tool cabinet on wheels with 6 drawers. The price is for one tool cabinet! Both together cost the corresponding 2400 € plus VAT. Used but almost like new. Minor signs of use on the worktop and otherwise fully functional with 2 keys each. Tool cabinet with 6 drawers L x W x H 1025x705x930 mm Drawers dimensions (inside) L x W x H : 1x 880x590x240mm Hfjdenucgxopfx Aacjn 5x 880x590x65mm The height is including the rollers ! Fully functional. Pickup and shipping (forwarding) possible

Condition: good (used), A drawer cabinet is offered out of a company liquidation Manufacturer Dick Lista 18 extracts Hedpfx Aaef Ezdvocefn filled with trapezoidal thread cutter, boring bars, round thread steels and more further photos on request Drawers on roller bearings Weight approx. 700kg external dimensions approx. 1510x720x750mm --no key--

Condition: used, Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet -Width: 560 mm Hfodpfjd I Da Rsx Aacsn -Depth: 665 mm -Height: 800 mm -Weight: 78 kg

Condition: used, Technical details: Number of drawer: 2 taper: SK40 weight: 362 kg dimensions L x W x H: 0,42 x 0,69 x 0,51 m Very well maintained tool trolley made of pipe construction, screwed with tools (comparable with the pictures) Hfodpfx Aaju Nkzpscjn *

Condition: used, Laboratory fume cupboard, fume cupboard, suction Hodpfx Aaob Uhkhocefn -Input: 230 volts AC -Dimensions: 1200/875/H1255 mm -Weight: 176 kg

Condition: used, Year of construction: 2012, Technical details: Number of drawer: 48 Shelf width: 160 shelf length: 600 shelf height: 60 mm electrical connection: 230V / 50Hz / 16A V / Hz. dimensions L x W x H: 0,8 x 0,72 x 1,7 m Tool dispensing system - Warehouse management system Selection through automatic processes Electronic access to definable drawers via warehouse management software -Optimized storage and management of tools Storage above the drawers, rubberized, WxD: 720 x 190mm Equipment: Computer HP pro monitor and input device Hand scanner Hfsdpeu Nkz Asfx Aacsn *

Condition: used, Tool trolleys, workshop trolleys, mobile workshop trolleys, drawer cabinets, welding machine trolleys, machine trolleys -Width: 410 mm -Depth: 800 mm Hedofnqhnopfx Aacofn -Height: 1010 mm -Weight: 49 kg

Condition: good (used), Drawer shelving, workshop drawer unit, tool cabinet – 10 drawers Hfsdpfoxgbd Uox Aacon – large format, approximately 116 x 101 cm inside the drawer – each drawer has its own bearing. Made in Germany

Condition: new, length 660 mm Hfjdpfxor I E E Ae Aacsn width 1240 mm height 1350 mm

Condition: used, Technical details: length: 650 mm Hedpfx Aaovb A Saecefn width: 600 mm height: 800 mm weight approx.: 50 kg

Condition: used, Year of construction: 2000, Technical details: length: 720 mm width: 780 mm height: 1050 mm Weight: 150 kg Hedjvb Aftopfx Aacjfn

Condition: used, Year of construction: 2023, Tending system configured for loading two Fanuc RoboDrill machines, available either as-is or can be reconfigured. The system is available due to a cancelled order. ORIGINAL SPECIFICATION (CAN BE RECONFIGURED): Hodpfx Aaswybbiocofn ROBOT: - Fanuc M-710iC/70 articulated arm robot, including: - Colour touch screen iPendant - Standard memory - Fanuc HandlingTool software - End-of-arm (EOA) mounted 2D iRVision camera - Payload capacity: 70 kg - Reach: 2,050 mm - Pneumatic grippers designed for die castings with automatic tool changer and EOA-mounted blow-off point SYSTEM: - RoboDrill tending system comprising: - Component infeed and outfeed drawers with part presence sensors - Fixture plates designed for two die-casting variants (approx. dimensions: 320 mm long x 110 mm wide x 50 mm deep) - External status beacons indicating: - Red: Fault condition - Amber: Cell open - Green: Operation finished - Buzzer: Fault condition - Integrated operator control panels, complete with: - Loader ready pushbutton - Continue pushbutton - Reset pushbutton - Integrated operator access panels, complete with: - Access request pushbutton GUARDING: - Powder-coated metal panels to enclose the robot cell, comprising: - Mesh screens forming a complete enclosure around the system (height: 2.2 metres), with interlocked single access door - Interlocked access to all loading shelves - Interlocked front access to RoboDrill machines - Light curtain safeguarding on the rear loading zones - All cables routed through galvanised metal trunking and cable trays - Drip tables for part drainage and improved loading efficiency CONTROLS: - 10” touchscreen HMIs INTEGRATION: - Ethernet IP/discrete I/O integration for customer-supplied parts washer and discharge conveyor

Year of construction: 1985, condition: used, CNC RASKIN RT75 turret punching machine for sheet metal processing In addition a very extensive punching tool assortment.(see photos) The machine is in good condition and is sold for lack of space. The Lista drawer cabinets are not included in the offer, but can also be purchased for an additional charge. There is also a software available which is not included separately. Travel X 750mm Travel Y 1000mm Stations 16 Machining up to 6mm aluminum Machining up to 6mm steel Machining up to 3mm CNS Hedpfx Asccl N Soacjfn

Condition: used, This listing is for the Arctiko LR500 Refridgerator The unit is in full working condition and is ready for immediate use Arctiko LR 500 Biomedical Refrigerator Item Code: DAI 0240 Hsdpfx Asxhf Dhjacjfn Temperature Range: +1°C to +10°C Capacity: 515 Litres Overview The Arctiko LR 500 is a high-performance biomedical refrigerator designed to meet the demanding storage requirements of laboratories, hospitals, research centers, and pharmaceutical environments. This unit offers precise temperature control, a user-friendly interface, and a flexible interior layout with options for shelves, drawers, or a combination of both. Key Features Temperature range: +1°C to +10°C with high temperature stability Flexible storage: Customizable with adjustable shelves, drawers, or a mix of both High capacity: 515 L of internal storage space User-friendly design: Automatic door closing Reversible door for versatile placement Adjustable shelving High performance: Maintains temperature even in environments up to 43°C ambient temperature Built-in alarms: Audible and visual alerts for temperature deviations, door open, power failure, and sensor errors Battery backup: Up to 72 hours for alarms and temperature display Connectivity: USB port, RS-232/RS-485 for data logging and remote monitoring Security: Lockable door with key for secure storage

Condition: new, Year of construction: 2025, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Hfedew Sgnkopfx Aacsn Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: used, mileage: 419,050 km, power: 353 kW (479.95 HP), first registration: 01/2021, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 385/55R22.5, fuel: diesel, wheelbase: 38,000 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, parking heater, spoiler, traction control, = Additional options and accessories = - Addaptive cruise control - Aluminium fuel tank - Central locking - Roof spoiler - Double fuel tank - Cooling drawer - Fog lights - PTO prepared - Disc brakes - Sleeping cabin - Parking heater - Power steering - Enhanced engine brake - Sun visor Hedpfx Aajxn Nv Uscsfn = Special features = XLRTEH4300G340173 = More information = Technical information Number of cylinders: 6 Engine capacity: 12,902 cc AdBlue system: Yes Tank capacity: 1275 litres Transmission: TRAXON, 12 gears, Automatic Front axle: Tyre size: 385/55R22.5; Steering Rear axle: Tyre size: 315/70R22.5; Double air Functional Load space capacity: 1,275 l Brand body: ZF More information For more information, please contact Youri van Doorne or Timothy Schutter

Year of construction: 2025, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Hsdpfx Asc Uydasacofn Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: excellent (used), mileage: 438,450 km, power: 353 kW (479.95 HP), first registration: 11/2019, fuel type: diesel, color: silver, axle configuration: 4x2, tire size: 385/55R22.5, fuel: diesel, wheelbase: 3,800 mm, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, parking heater, spoiler, traction control, = Additional options and accessories = - Adaptive cruise control - Adaptive cruise control - Aluminum fuel tank - Central door locking - Roof spoiler - Dual fuel tanks - Electric windows - Refrigerator - Cooling drawer - Radio and audio system - Disc brakes - Side skirts - Speed limiter - Stability control - Parking heater - Power steering - Sun visor = Remarks = XLRTEH4300G293186 = More information = Technical information Number of cylinders: 6 Engine capacity: 12,902 cc Drivetrain AdBlue system: Yes Tank capacity: 1,275 liters Hfodpfxexn Nq Ej Aacjn Transmission Transmission: TRAXON, 12-speed, automatic Axle configuration Brakes: disc brakes Front axle: Tire size: 385/55R22.5; Steerable; Tread depth left: 30%; Tread depth right: 30%; Suspension: leaf suspension Rear axle: Tire size: 315/80R22.5; Twin tires; Inner left tread: 40%; Outer left tread: 40%; Inner right tread: 40%; Outer right tread: 40%; Suspension: air suspension Functional Load compartment volume: 1,275 l Superstructure brand: ZF Condition Technical condition: very good Optical condition: very good More information For more information, please contact Youri van Doorne or Timothy Schutter.

Condition: new, Year of construction: 2025, Robust design also allows the machining of longer workpieces Sanding unit swivels, therefore also usable as edge sanding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the grinding belt High belt speed of 17 m/s Right-left rotation Upper grinding sole with graphite coating grinding shoe 4-fold spring mounted With movable grinding shoe for bevelled surfaces Smooth-running grinding table even with high loads from heavy workpieces Optimal price-performance ratio Additional equipment ESE Electrical table height adjustment as standard Divided table to fold up for special edge grinding Drawer sanding device Integrated worktable lighting Equipment details 225 mm large balanced belt rollers ensure optimum and low-vibration drive belt speed 17 m/s With swivel-mounted professional sanding shoe for bevelled surfaces 4-fold spring suspension Electrical table height adjustment as standard Operating elements ergonomically arranged on separate control panel With drawer sanding device as standard Divided table to fold up for special edge grinding applications Dimensions and weights Length approx. 3750 mm width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection Suction nozzle diameter 160 / 160 mm Hfjdpfxeff Hdfs Aacen Work table(s) Work table height adjustment 550 mm Work table transverse stroke 690 mm Electrical data Power Höh

Condition: excellent (used), mileage: 435,550 km, power: 353 kW (479.95 HP), first registration: 01/2022, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/70R22.5, fuel: diesel, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, parking heater, spoiler, traction control, = Additional options and accessories = - Addaptive cruise control - Aluminium fuel tank - Central locking - Roof spoiler - Double fuel tank - Electric windows - Cooling drawer - Lane departure warning system - Fog lights - Radio and audio system - Disc brakes - Side skirts - Sleeping cabin - Speed limiter - Stability control Hjdpsxn Npbofx Aacofn - Parking heater - Power steering - Sun visor = Special features = XLRTEH4300G384294 = More information = Technical information Engine capacity: 12,902 cc Drive AdBlue system: Yes Tank capacity: 1275 litres Transmission Transmission: TRAXON, 12 gears, Automatic Axle configuration Tyre size: 315/70R22.5 Brakes: disc brakes Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Dual air; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right inner: 50%; Tyre profile right outer: 50%; Suspension: air suspension Functional Load space capacity: 1,275 l Brand of bodywork: ZF Condition Technical condition: very good Optical condition: very good More information For more information, please contact Youri van Doorne or Timothy Schutter

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates Hfsdpfxeiidm Nj Aacon - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -