Used Tomcat Cleaning for sale (6,051)

Condition: used, Year of construction: 2020, sweeping width 942 mm Hsdpfx Aaogvqzgo Uoi working width Bodendüse: 700 mm tank Reinigung: 79 l tank Schmutzwasser: 83 l weight of the machine ca. 145 kg dimensions of the machine ca. 1,32 x 0,7 x 1,1 m - Exhibition machine and demonstration machine, like new- - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft

Condition: good (used), functionality: fully functional, Sheet Cleaning Machine Jeros 5015/828 for 2-edge trays short side raised stainless steel design with oiling system DGUV V3 tested exclusively by us connection 400V, 16A CEE plug Used machine Options: sheet trolley maintenance contract service package delivery service Hodjyaklcjpfx Aa Uji training & commissioning spare parts box Visit us!

Year of construction: 2014, condition: excellent (used), functionality: fully functional, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For consistently clean components in continuous operation Continuous flow cleaning system made of stainless steel with oil separator for uninterrupted material throughput. The parts to be cleaned pass continuously—or, if needed, in cycles—through successive treatment zones. Cleaning is carried out by passing the parts by fixed nozzle systems. Designed for components with dimensions approx. 400 x 100 x 200 mm Wire link conveyor transports the components lying flat or standing upright through the cleaning system • Surrounding nozzle frame – the offset nozzle arrangement enables all-round cleaning • Separation of treatment zones reduces cross-contamination • Nozzle and frame adjustment to suit component • Customizable useful dimensions, load capacity, and pump output Process steps occur in successive treatment zones: • Spray cleaning – series connection of various wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank capacities: Washing tank: 800 liters Rinsing tank: 500 liters Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Washing tank pumps: 3.0 kW Rinsing tank pumps: 2.2 kW Washing pump pressure: 3 bar Hsdpexcun Esfx Aa Usi Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine includes stainless steel drip trays for leakage protection—these are included in the price and will be delivered with the machines. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2026, 3 & 4 Edge Sheet Metal Cleaning Machine Mica Model: CBP-3 Single-operator Mobile stainless steel construction Maximum sheet size: up to 600 x 800 mm Hedpfow S Slnox Aa Uji Pull-out drip tray below for easy cleaning Dimensions: 2234 x 630 x 1372 mm (LxWxH) The versatility of this tray/sheet cleaner is demonstrated by its ability to process even 4-edge trays with edge heights of up to 24 mm. Debris and dirt are collected below the machine on an easily removable and cleanable tray. The unit is fully mobile and can be easily moved to any desired location after use. The entire construction is glass bead blasted, making the surfaces as smooth and hygienic as possible. Connection: 400V, 1 kW, 16A CEE plug Weight: 205 kg Brand new equipment With warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Sheet cleaning size up to 600 x 1000 mm Sheet greasing/oiling system Service package Delivery service Operator training & commissioning Visit us!

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 31437, Used cleaning system Make: MTM CEE WEBA 753 WSVT Machine number (serial number): 31437 Year of manufacture: 2015 Control: Siemens / S7-300 Electrical supply data: Connected load: 33 kW Hedpfjyklyiox Aa Uji

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-009, Rotary spray cleaning machine YM-850 The YM-850 rotary spray cleaning machine is designed for efficient cleaning of industrial parts with hot pressurized water and biodegradable cleaning agents. This machine has very low running costs and low consumption. The machine frame and body are made of high quality corrosion-free stainless steel. This machine is the right choice for cleaning oil, grease and production residues on the surface of workpieces as well as for corrosion protection applications. The YM machine has stainless steel pump, spray nozzles, heating elements and motorized basket design as standard. - Spray cleaning system for small to medium batch sizes, - for workshop, maintenance or intermediate cleaning - Cleaning with hot water - Spray cabin as a top loader Technical details: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Pump pressure: 8 bar Heating: 7.5 kW maximum loading weight: 120 kg Hjdpfx Aetwmxyja Uei Connection: 220-380 volts - 3 phases Timer: 0-30 mins Thermostat: 0-60 C° Stainless steel body: 430 AISI Filter cups: 2 pieces - 2-3 mm perforation Internal filter: 100µ

Condition: good (used), Cleaning container, safety container, cleaning container Hedocnha Aopfx Aa Uei -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg

Condition: used, Cleaning container -Large: cleaning container -Interior dimensions: see photos -Performance levels: 5 -Price: per piece -Number: 2 pieces -Dimensions: 595/380/H660 mm Hodsd Skkyjpfx Aa Uei -Weight: 38 kg

Condition: used, Control for cleaning system -Type: Autoclude M1000 -Dimensions: 335/210/H120 mm -Weight: 4 kg Hjdpfxob Uhtwj Aa Uei

Condition: used, Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center Hjdpfxsdtm Uko Aa Uji -Number: 9x containers with 200 liter cleaning fluid -Price: complete -packed on: EURO pallet -Weight: 252 kg

Condition: new, Year of construction: 2025, Pulsed laser cleaning device with 200-watt laser power significantly more effective for cleaning and rust removal applications than continuous lasers such as those used in welding lasers. - View and test with us now - Top-quality device at a top price, available from our showroom - For paint removal, rust removal, stainless steel weld seam cleaning, etc. - 200-watt pulsed laser / air-cooled - German menu navigation - Immediately available Also check out our attractive leasing and hire purchase offers. Sale only to commercial customers Machine dimensions approx.: Width: 60 cm Height: 120 cm Depth: 110 cm Hedpfeuhcd Rex Aa Uei Weight: approx. 100 kg

Year of construction: 2019, condition: excellent (used), The system has always been used with ILSA-approved chemicals (modified alcohols). The installation, which loads two crates per wash cycle, can be operated automatically, managing up to five 'rollers' each carrying two crates, allowing the washing of up to 10 crates without the need for the continuous presence of an operator during loading. Hsdpfxjykrfre Aa Uji A stock of various types of crates for washing is available (both galvanized iron and stainless steel, with different hole patterns and dimensions, all suitable for use with the system), and these will be included in the supply of the washing installation.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Hedpfxow Hk T Ue Aa Usi

Year of construction: 2009, condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Hsdpspcgy Rjfx Aa Usi

Condition: ready for operation (used), Max. air supply: 5bar, operational temperature: -10 to 50°C, max. connected load: 200W, with documentation. Hodpfx Ajiu H Itsa Uji

Condition: new, Year of construction: 2025, Al-Ko clean air deduster Exhibition piece (no operating hours yet - new) Hjdpfsbuvbrjx Aa Usi Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece At an absolute special price Location: From stock Bitburg Hjdpscdy Ndofx Aa Uoi

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Hsdscnw U Dopfx Aa Uoi Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Hsdpfjcqy I Ssx Aa Uoi Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Chip collection volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Hodpfohkztwsx Aa Uji Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Hedpfxocdy I Te Aa Uji Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Hedpedqzhhefx Aa Usi Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Technical data: - Nominal motor power: 11.0 kW /3 Ph Hjdpfxehkzt Ns Aa Uoi - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100 % air recirculation Residual dust content < 0.1 mg/m³ Hodpfehkzu Asx Aa Uoi Low noise emission Longer filter life Easy emptying Supplied ready to plug in With rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Intake port: 300 mm Nominal motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow 4,900 m³ / h 6,000 m³ / h Nominal volume flow: 5.089 m³ / h Negative pressure: 2.280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Cellular wheel capacity:15.816 L / h Weight:920 kg Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Weight: 1570 kg Machine is brand new in our STOCK Hedpfx Aeh D If Hsa Uji - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg