Used Rotox Epa 277 for sale (30)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, masina za ciscenje coskova Iedpow Hpd Sofx Aa Ieic

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, rotational speed (max.): 12,000 rpm, I am offering my Rotox KF 347 copy milling machine for sale, which is in good condition. It is fully functional and ready for use in your workshop. -Model: Rotox KF 347 -Power: 1.5 kW -12,000 RPM -Year of manufacture: 2000 -Voltage: 400 volts -Condition: Very good and fully functional Iiodpfxeyxy Ncj Aa Ijc The machine is available for demonstration and can be tested at any time.

Condition: good (used), Year of construction: 2007, Cutting and processing center ROTOX, consisting of the cutting center ZSA 263, reinforcing bar bridge, and bar processing center SBA 485, shown from right to left. Iisdpfoy Tbimsx Aa Ioc

Year of construction: 2015, condition: used, machine/vehicle number: 169 6019, In very good condition. Iiedpfx Aozdql Aea Iec

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: LA398, In very good condition. Iodpfx Aaszdp H Ej Ioic

Year of construction: 1984, condition: used, Copy router Rotox Iiedpfx Aaoillyls Isc Type KF 257

Year of construction: 2000, condition: excellent (used), As-new lock copy milling machine for PVC and aluminium profiles from a training workshop Key features: - 3-sided machining of sash and frame profile bars in a single clamping, e.g. for profile cylinders, handle holes, and lock cases - Equipped with 4 tracing pins for flexible and simple use of the template system - Convenient insertion of the profile bar without interfering milling units - Manual profile bar rotation device for 3-sided machining - Optimum machining quality due to the design-based use of short tools Max. workpiece cross-section (W x H): 200 x 100 mm Milling area (L x W): 315 x 130 mm Plunge depth: 200 mm Speed: 12,000 rpm Drive power: 1.5 kW at 400 V Isdpfoyrh Ncex Aa Ieic Machine dimensions (L x W x H): 1260 x 820 x 1650 mm Machine weight: 340 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine Iijdpfx Asx R Sv Ssa Ijc -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 403 6079, functionality: fully functional, overall weight: 220 kg, Dimensions: Machine width: approx. 700 mm Machine depth: approx. 1,350 mm Machine height: approx. 1,250 mm Weight: approx. 220 kg Cutting angle: 45 degrees Tools used: All milling and cutting tools must comply with DIN EN 847-1 and be appropriately matched in terms of operating speed to the rotational speed of the milling motors. Milling cutter: Ø 150x30x3.0, 32 teeth Cutting blade: Ø 300x30x2.6, 96 teeth GLA 403 OPERATING MANUAL Iiedjwhpp Rjpfx Aa Ijc Material to be processed: PVC window frame strips: Profile length: min. 200 mm (dependent on the length of the fence) Profile height: min. 5 mm max. 50 mm Profile width: min. 10 mm max. 50 mm Tool clamping: Pneumatic Electrical part: Electrical connection: 400V, 50Hz (alternating current) Power consumption: 2.2 kW Protection: 16A (time-delay) Saw motors: 230/400V; 4.0/2.3A 1.1 kW; 50 Hz; 2860 rpm Pneumatics: Working pressure: 5-6 bar Maximum pressure: min. 5 bar (also during operation) max. 6 bar Air consumption: approx. 15 l/min per saw cut Fitting: NW Ø 9 mm Permissible temperature during operation: min. 15°C and max. 40°C

Year of construction: 2006, condition: used, Rotox bar processing automaton type SBA 485 Ijdpfx Aeyliq Usa Ijic

Condition: used, Rotox corner processing machine Iedpfxjylipks Aa Isic

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3486579, Offer 26048 Iiodsyymgkopfx Aa Iec Single-spindle Copy Milling Machine for 3-Sided Processing Technical Data: - 3-sided machining in a single clamping for lock and euro-profile cylinder (PZ) cutouts, - e.g. milling in aluminium / plastic / steel profiles - Operated via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar rotation device for 3-sided processing - Working range - x (crosswise) 250 mm - - y (longitudinal) 90 mm (depending on position) - - z (vertical) 120 mm (depending on position) - Max. profile height, depending on position: approx. 120 mm - Max. profile depth: 100 mm - Spindle speed: approx. 6,000 + 12,000 rpm - Pneumatic connection: 8 bar - Drive: 400 V / 1.5 kW - Required space: approx. W 650 x H 1550 x D 850 mm - Weight: approx. 340 kg

Year of construction: 1996, condition: used, Door hinge drilling machine Iodpfsc Nin Dsx Aa Isic

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, Copy router Power (kW) 1.5 Voltage (V) 400 Ijdpfx Ajtqytiea Isic Operating pressure (bar) 7 Milling motor speed (min-1) 12,000 Max. Workpiece cross-section W x H (mm) 200 x 100 Milling area L x W (mm) 315 x 130 Immersion depth (mm) 200 Machine dimensions L x D x H (mm) KF 347 = 1,260 x 820 x 1,650 Weight (kg) approx. 350

Year of construction: 2001, condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 12,000 revolutions per minute 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray device Profile width: 30-120 mm Profile height: 50-100 mm Iisdpfxjvgdpdj Aa Ijc Bar length: 490 - 3,000 mm Weight: about 350 kg Very good condition

Year of construction: 2001, condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute preselectable, allowing both steel and aluminum profiles to be processed Iijdpfx Aaewudhne Ioc 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: about 350 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, For sale: ROTOX ZSA 263 automatic profile cutting machine, year of manufacture 2012. The machine is in working condition, regularly used, and available for inspection and testing by prior appointment. Main features: - CNC control system - Cutting angles: 45°, 90°, and 135° - Pneumatic profile clamping - Automatic profile feeding Ijdpoy Sk Amsfx Aa Isic - Right and left side material transport - Suitable for automatic cutting of PVC profiles The ROTOX ZSA 263 is a reliable and high-performance industrial machine, ideal for companies involved in window and door manufacturing. For more information or to arrange a viewing, please feel free to contact us.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Rotox sash assembly table, year of manufacture 2007; automatic screw feeding, adjustable screwdriver height, corner bearing drilling unit, fittings shelf Iodsyr Arxspfx Aa Isic

Condition: ready for operation (used), Year of construction: 1995, Door band boring machine Rotox KBG 192, built 1995, 3m sliding table, Iedpfxed R S Hns Aa Isic

Year of construction: 2000, condition: ready for operation (used), Profile width min./max.: 50mm-130mm, profile height min./max.: 50mm-115mm, max. notching depth: 40mm, max. cutter diameter: 180mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1250mm, weight: approx. 300kg. On-site inspection is possible. Ijdpewwvwgsfx Aa Ioic

Year of construction: 2022, condition: excellent (used), ROTOX tilting table in as-new condition, including rails, transport table, and control cabinet Iiodpfxox Dy S So Aa Isc

Condition: excellent (used), Year of construction: 2011, Glazing bead saw centre ROTOX GZS 399 incl. glazing bead feed and inkjet printer, running direction from left to right, operated in single shift Iiedpox Em A Aofx Aa Ijc

Condition: excellent (used), Year of construction: 1993, operating hours: 9,000 h, air pressure: 6 bar, air demand: 12 m³/h, input voltage: 400 V, Rotox milling machine for alu and pvc windows and doors Iodpfeu Dat Dsx Aa Ieic

Condition: excellent (used), Shipping eu 300euro Isdpjl Skk Aefx Aa Ijic

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Swiveling support table from 0° to 180°, enabling 3-side machining in one setup. Iisdjyuy S Iopfx Aa Isc 2 selectable spindle speeds, 6,000 or 12,000 revolutions per minute, allowing both steel and aluminum profiles to be processed. 4 pneumatically controlled copying pins. Pneumatic material clamping. Minimum quantity lubrication system. Profile width: 30-120 mm. Profile height: 50-100 mm. Bar length: 490 - 3,000 mm. Weight: approx. 350 kg.