Used Tire Shredder for sale (16,088)

Condition: like new (used), functionality: fully functional, HBS 840-44-E Bark Shredder totally renovated and as good as new Gsdpfoi E Tkwjx Aateui

Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% Guodpfjdv Eu Hsx Aatei - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2026, functionality: fully functional, RSS HD 4 Shaft Shredders in any size, Adjustments to e.g. knives, motors, sieve, frame possible. Gsdpfx Aeh N Dmnsateui Supply and discharge belts, storage, metal separation possible. Larger or smaller models also available. optional fast hydraulical screen cleaning or changesystem for advise or information do not wait, contact us. Delivery in consultation.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,300 kg, rotor diameter: 252 mm, number of blades: 30, power: 18.5 kW (25.15 HP), type of input current: three-phase, rotational speed (max.): 90 rpm, input voltage: 400 V, AZR 600 18.5 kW 30 rotating knives with welded knife carriers, including 2 knife rows = 30 knives "V5" Screen: 15/20 mm Angled machine frame Slide with pressure plate Vibration-dampening machine feet Automatic star-delta starter Automatic shutdown when the hopper is empty Control cabinet with 5 m cable and PLC control Gedpfx Aaez I R Shotoui Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ Rotor diameter: 252 mm Main motor: 18.5 kW - 400 V - 50 Hz - 3-phase Hydraulic motor: 0.75 kW - 400 V - 50 Hz - 3-phase Further information on the knife system: reinbold-entsorgungstechnik.com/files/prospekte/messer-rotor-sys teme-2021.pdf

Condition: used, Year of construction: 2006, Doppstadt DW 3060 E Büffel – Electric Shredder We are offering the following used Doppstadt shredder for sale: Technical data and equipment: Manufacturer / Model: Doppstadt DW 3060 E Büffel Year of manufacture: 2006 Drive: Electric motor, 315 kW Gjdpfxez Ntcgs Aatoui Roller configuration: 21 teeth Control cabinet Lower conveyor belt Side conveyor belt, 9m Remote control Feed hopper with extension Dismantling and loading: The machine will be dismantled and loaded. If you are interested, we will be happy to provide you with further information, photos, or arrange a viewing.

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, overall weight: 9,500 kg, rotor diameter: 446 mm, number of blades: 36, total length: 2,990 mm, total height: 2,100 mm, total width: 2,250 mm, rotor length: 1,560 mm, power: 132 kW (179.47 HP), rotational speed (max.): 1,485 rpm, Redoma RC 130 – Single-shaft pre-shredder, rotor 1560mm, used and in working condition For sale is a Redoma RC 130 single-shaft pre-shredder in used, but functional condition. The machine is suitable for pre-shredding various materials in industrial and commercial applications. Scope of delivery: Redoma RC 130 single-shaft pre-shredder Associated control cabinet Various spare parts The machine is sold in used, functional condition. Ideal for companies looking for a used pre-shredding system or wishing to expand their existing machinery. If you are interested or have any further questions, please do not hesitate to contact us. Gusdpez N Ev Sefx Aatei

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system - Weight: 20,000 kg Gsdpfx Aaoz Idb Notoui - Remote control - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm - Teeth: 24

Condition: used, Year of construction: 1999, Used wood shredder Manufacturer: Weima Type: WL 4 Year of manufacture: 1999 Technical data V - Rotor Motor 18.5 kW Gusdpfx Ajzu Ap Ueatoi 400 V, 49 A, 90 rpm Feed opening 800x600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,099 h, load capacity: 3,000 kg, lifting height: 8,300 mm, free lift: 2,800 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,700 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,100 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16x7x10 1/2, rear tire type: cushion tires (black), rear tire size: 23x10-12, overall weight: 9,400 kg, empty load weight: 6,400 kg, total height: 2,650 mm, total length: 2,000 mm, total width: 3,100 mm, color: red, Equipment: CE marking, adjustable boom, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, COMBILIFT C3000GST | 2018 | GAS | Triplex 8300 mm | Condition 5/5 ⭐ Specifications: Model: COMBILIFT C3000GST Year of manufacture: 2018 Operating hours: 6099 h ⏱️ Drive: Gas ⛽ Load capacity: 3000 kg Load centre: 600 mm Mast: Triplex Lift height: 8300 mm Fork positioner: 1360 mm Fork length: 1100 mm Own weight: 6400 kg Dimensions: L: 2000 mm | W: 3100 mm | H: 2650 mm Overall height: 3700 mm Tyres (NEW – 100%) 🆕 Superelastic (solid) Front: 16x7x10 1/2 Rear: 23x10-12 Guedpfx Aaj Agnnrotsi Refurbished – no corrosion ✨ Condition: Technical: 5/5 – fully serviced 🔧 Visual: Very good – like new 👌 Ready for immediate use ✅ Warranty included. Transport available 🚛

Condition: used, Technical specifications: For shredding wooden waste. Gusdpfx As Agwlcsatei Shaft width: 500 mm Shaft diameter: 250 mm Screen diameter: 15 mm Safety switch Power supply: 400 V Motor power: 7.5 + 1.5 kW Overall dimensions: Length: 1600 mm Width: 1200 mm Height: 1550 mm

Condition: reconditioned (used), Year of construction: 2017, operating hours: 5,873 h, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 10,500 mm, total height: 3,400 mm, total width: 2,800 mm, rotor length: 3,000 mm, rotor width: 3,000 mm, rotational speed (max.): 31 rpm, year of last overhaul: 2026, Doppstadt DW 3060K Buffel Type F Bio Power - Year of manufacture: 2017 - Operating hours: 5,873 - Engine: MTU 6R 1300 (490 hp) - Weight: 30,000 kg - Number of teeth: 42 - Radio remote control - Cable control - Central lubrication system Gedpfx Ao Aarp Eoatoui - 7m rear discharge conveyor - Magnetic separator (over-belt) - BioPower system – increased power and efficiency - Tracked chassis - Working shaft: 3000x600 mm Machine has been refurbished and is available immediately. (Komptech Terminator, Tana Shark, Eggersmann, Hammel, Arjes, Lindner, UNTHA)

Condition: used, Year of construction: 1985, 1x Used MOCO AZ-8 Shredder Guedpfszx Svxox Aatsi Drive power: 7.5 kW

Condition: good (used), RAFFIN gooseneck press 70 Tons Capacity 600mmx300 Good overall condition Guedoxb D Hhopfx Aatei Machine dismantled, loading onto truck. Contact by phone in French, by email in your language.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,099 h, load capacity: 3,000 kg, lifting height: 8,300 mm, free lift: 2,800 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,700 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,100 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16x7x10 1/2, rear tire type: cushion tires (black), rear tire size: 23x10-12, overall weight: 9,400 kg, empty load weight: 6,400 kg, total height: 2,650 mm, total length: 2,000 mm, total width: 3,100 mm, color: red, Equipment: CE marking, adjustable boom, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, COMBILIFT C3000GST | 2018 | GAS | Triplex 8300 mm | Condition 5/5 ⭐ Specifications: Model: COMBILIFT C3000GST Year of manufacture: 2018 Operating hours: 6099 h ⏱️ Drive: Gas ⛽ Load capacity: 3000 kg Load centre: 600 mm Mast: Triplex Lift height: 8300 mm Fork positioner: 1360 mm Fork length: 1100 mm Own weight: 6400 kg Dimensions: L: 2000 mm | W: 3100 mm | H: 2650 mm Overall height: 3700 mm Tyres (NEW – 100%) 🆕 Superelastic (solid) Front: 16x7x10 1/2 Gjdo Aiutrjpfx Aatjui Rear: 23x10-12 Refurbished – no corrosion ✨ Condition: Technical: 5/5 – fully serviced 🔧 Visual: Very good – like new 👌 Ready for immediate use ✅ Warranty included. Transport available 🚛

Condition: used, functionality: fully functional, machine/vehicle number: 500-8866, overall weight: 15,000 kg, total length: 3,600 mm, total width: 3,020 mm, total height: 2,470 mm, input voltage: 400 V, number of blades: 63, rotational speed (max.): 68 rpm, rotor diameter: 600 mm, rotor length: 1,500 mm, rotor width: 1,500 mm, type of input current: three-phase, WEIMA single-shaft slow-speed shredder – industrial, 1500 mm rotor, 1500 × 1835 mm opening For sale: used, single-shaft slow-speed shredder from the renowned WEIMA brand, designed for shredding a wide range of industrial waste – including hard plastics, film, big bags, wooden components, and furniture panels. This industrial-class machine, with its large rotor and wide inlet, guarantees high performance and the ability to process large-sized materials. 🔧 Technical specifications: Number of rotor knives: 63 Feed opening: 1500 × 1835 mm Gjdpfxsz D Sz Ns Aatjui Rotor: length 1500 mm, diameter 600 mm, rotational speed 68 rpm Rotor type: reinforced V-rotor, screw-in knife holders Pressing system: pendulum type Hydraulic and electrical system: in working order 📦 Additional equipment: New, unused screens: 2 pieces (thickness 10 mm, size 708 × 1225 mm, mesh size Ø 40 mm) Set of mounting blocks + lower mounting strip for screens ⚠️ Condition: Used machine Rotor and knives need to be replaced or refurbished All other components are in working order

Condition: new, Year of construction: 2026, Petrol Wood Chipper R1500 The R1500 petrol wood chipper is a powerful and robust branch shredder designed for professional users involved in wood processing and disposal. Equipped with a reliable DUCAR engine with a displacement of 420 cm³ and a power output of 15 HP, it provides high efficiency and durability in both industrial and service applications. The machine allows fast processing of wood material into chips with a size of 20–40 mm, which can be used as fuel, compost material, or garden mulch. Main advantages of the machine High power and performance – the DUCAR OHV petrol engine ensures optimal operating parameters and long service life. Durable construction – the use of a cast iron cylinder sleeve increases wear resistance and improves lubrication. Advanced safety features – automatic ignition cut-off system and emergency safety switch located in the feed hopper. Easy operation and transport – folding feed hopper and large 45 cm diameter wheels make handling and mobility easier. Versatile applications – suitable for shredding both fresh and dry wood of various hardness levels. Design and technology The R1500 wood chipper is equipped with a belt drive system and centrifugal clutch, ensuring smooth and safe power transmission to the cutting drum. The knives are manufactured from Hardox 500 steel, which provides exceptional resistance to abrasion and significantly extends service life while reducing the need for frequent replacement of cutting components. The feed hopper is positioned at an optimal angle to facilitate material loading, while the 360° rotating discharge chute allows precise direction of the chip stream. The self-feeding drum design improves efficiency and minimizes the need for manual material pushing. Precision and working efficiency The 15 HP engine, high drum speed of 2000 rpm, and two cutting knives ensure uniform and efficient branch processing. The chipper can handle: fresh softwood up to 120 mm in diameter, fresh hardwood up to 100 mm in diameter, dry hardwood up to 80 mm in diameter. This allows effective processing of various types of wood while maintaining high-quality chips. Applications The R1500 model is an ideal solution for companies involved in landscaping, agricultural farms, municipal services, and businesses processing wood waste. It is also suitable for sawmills and biomass production companies. The produced wood chips can be used in heating systems, as compost material, or as garden mulch. Standard equipment DUCAR petrol engine 420 cm³ / 15 HP Hardox 500 steel cutting knives Belt drive system Feed hopper with folding extension 360° rotating discharge chute Safety system with ignition cut-off Technical specifications Parameter Specification Drive system V-belts, centrifugal clutch Engine 15 HP, 420 cm³ Maximum cutting diameter (fresh softwood) 120 mm Maximum cutting diameter (fresh hardwood) 100 mm Maximum cutting diameter (dry hardwood) 80 mm Number of drum knives 2 Knife type Hardox 500 steel Material feeding Self-feeding drum Guedpfx Aaevxtd Ustei Dimensions (L × W × H) 180 × 82 × 130 cm Feed hopper dimensions 57 × 52 cm Discharge chute rotation 360° Discharge chute height 130 cm Wheel diameter 45 cm Drum speed 2000 rpm Chipper weight 230 kg

Condition: excellent (used), Year of construction: 2024, Tires for sale: Firestone Destination Tires M/T 255/75 17 Guodpowq Sa Rsfx Aatsi We have 5 tires: 2 tires are new, they were used for about 1 month.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: Guodpfxozdf Ruj Aatsi - Rotor bearings renewed - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed - new drive belts - Screens will be newly manufactured according to the required grain size - Complete new paint job - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: - two overhauled gearboxes - overhauled drive motor - new turbo coupling

Condition: new, The price/performance ratio of this model is very good; it is easy to operate, reliable, and has low maintenance costs. Modern PLC control including control cabinet & cable (5 m) Segmented push floor Sieve basket with replaceable sieve Foreign object detection/overload protection Automatic shutdown Potential-free contact CE Motor power: 15.0/18.5/22.0 kW, 400 V, 50 Hz Rotor width: 915 mm Rotor diameter: 325 mm Cutting blades: 40 pcs (30 x 30 mm, hollow ground) Counter blade: 1 Sieve size: 7 - 40 mm (round or square, other sieve sizes upon request) Infeed hopper in standard size 920 x 1220 mm Extraction connection 200 x 200mm Dimensions L x W x H: approx. 2,320 x 1,500 x 1,890 mm Weight: approx. 1,980 kg OPTIONAL: additional row of cutting blades on the rotor second counter blade cutting blades, sieve, counter blade made of special steel hopper dimensions according to customer requirements Guodpfeza Erkjx Aatoi hopper with pneumatically opening lid Note regarding used machines: • Errors and omissions in technical data and subject to prior sale. • Prices quoted are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* Godpfjhzlr Iex Aateui ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2023, Wood chipping machine Guedpfxjtnlfye Aatji

Condition: used, Year of construction: 2017, operating hours: 1,030 h, functionality: fully functional, machine/vehicle number: 1001, total width: 2,550 mm, overall weight: 19,000 kg, hopper volume: 5,000 l, rotor diameter: 650 mm, rotational speed (max.): 14 rpm, HAMMEL shredder, type VB 650 D, No. 1001, Tier4Final • Year of manufacture: 03/2017 • Currently approximately 1030 operating hours / changing – machine is still in operation › mounted on a robust hooklift frame • Drive system - with Cummins QSB 6.7 Tier4Final diesel engine, approx. 275 hp - Emission levels comply with Euro standards - hydrostatic drive with performance-controlled hydraulic motors • Tool shafts - special, patented tool - speed of tool shafts 14 - 38 rpm - tool shaft length approx. 1,750 mm - tool shaft diameter with tooling approx. 650 mm automatic reversing function and forced reversing • Discharge conveyor - approx. 1,400 mm wide - discharge height approx. 3,400 mm Gjdpfjz Tc Efjx Aatoui • Hopper consisting of - main and tilting hopper, approx. 5 m* total capacity • with hydraulic conveyor height adjustment via hand lever valve • Radio remote control, 6-channel, with emergency stop • Paint color: RAL 3020 red • Total weight with additional equipment approx. 19 t Machine equipment Shaft configuration • 5-piece shaft with 7/7 discs - refurbished 1 counter-cutting bar with comb • refurbished 1 axle with drawbar 1 permanent overband magnet • hydraulic height adjustment via radio remote control MACHINE AVAILABLE FROM FEBRUARY 2027

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Waste material shredder, Hacker wood shredder, chipper, shredder MHR630 proline The MHR proline series consists of robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and industrial enterprises seeking an economical yet powerful solution. Advantages: Gsdjz Tddvepfx Aateui - Continuous, uniform shredding process - High performance with low energy consumption - 2 rows of knives for increased throughput - Robust construction - Larger feed opening - Excellent value for money - Ready for connection - Controlled by Siemens PLC - MHR630 proline Rößler waste material shredder – “Made in Germany”

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2016, total width: 2,480 mm, total height: 1,230 mm, suspension: air, tire size: 385/55 R22.5, wheelbase: 8,790 mm, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Drum brakes = Notes = 2016 Krone 40FT High Cube chassis with ABS/EBS, BPW axles with drum brakes, extendable rear structure, suitable for: 1x 40FT HC, 2x 20FT, 1x 30FT, 1x 20FT center, 1x 20FT rear, unladen weight: 4,980 kg, permissible total weight: 41,000 kg, tires: 385/55-R22.5 (tread depth left: 12/13/13 mm; tread depth right: 12/11/12 mm), Dutch registration = Further Information = General Information Year of manufacture: 2016 Registration number: OP-66-GH Axle Configuration Tire size: 385/55 R22.5 Axle brand: BPW drum Godpsz Ekqxjfx Aatoui Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; tire tread depth left: 75%; tire tread depth right: 75% Rear axle 2: Max. axle load: 9000 kg; tire tread depth left: 80%; tire tread depth right: 68% Rear axle 3: Max. axle load: 9000 kg; tire tread depth left: 90%; tire tread depth right: 75% Weights Unladen weight: 4,980 kg Payload: 36,020 kg GVW: 41,000 kg Functional Body brand: Krone SD Condition Technical condition: good Visual condition: good Further Information Please contact Arne Honingh for further information.

Year of construction: 2026, condition: new, functionality: fully functional, Styrofoam press / auger compactor for EPS and XPS For sale is a compact system for shredding and compacting EPS (Styrofoam®) and XPS. It is ideally suited for EPS packaging, molded parts, as well as production and cutting waste. The Styrofoam shredder is located in the upper section of the system. This shredder breaks down the fed material and then transfers it to the lower section of the system. There, the shredded material is compacted using a compression auger and discharged as a compacted material strand. The significant volume reduction allows for a considerable reduction in storage, transportation, and disposal costs. The compacted material can be collected in a space-saving manner and fed for further processing or recycling. The system is robustly constructed and has separate drives for the shredder and compression auger. At the customer's request, we can carry out various modifications and adjustments, for example: Adjustment or replacement of the mold Changes to the material inlet or outlet Adjustments to customer-specific production conditions Further mechanical or electrical modifications by agreement Guedpfjzuy Syjx Aatei If you have any questions about the system, possible adjustments, or your specific application, we are always happy to assist you.