Wood shredder

Robust SD 900/18,5 kW

Condition: used, Year of construction: 2003, Filter area: 50 m² Nwodjzb N T Uepfx Akien Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Storage location: Nattheim

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Nedpfeua Tbwsx Akiown Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor Nodpfx Ajp H Sv Dskiewn 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 01113, total width: 2,180 mm, total length: 12,200 mm, bale length: 500 mm, bale height: 400 mm, pressing force: 350 t, overall weight: 34,000 kg, Ecotecnica shear baler mod. 2535, year 2013, with approximately 5,000 operating hours, in good working condition and complete with documentation. Machine suitable for compressing and shearing ferrous scrap, including sections, sheet metal, and mixed scrap. Technical data: Shear force: 350 tons Operating hours: 5,000 Compression box length: 5.0 m Box width with wings open: 1.70 m Bale size: 500 x 400 mm Total length: 12.20 m Width: 2.18 m Weight: 34,000 kg Equipment: Iveco diesel engine, 172 HP Radio remote control Complete documentation Nwjdpey Ibw Tofx Akion Machine is fully functional and ready to use. Inspection and testing possible.

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence Nwodpfeqpdi Uex Akisn immediately available Location: Austria, near Klagenfurt

Condition: refurbished (used), Year of construction: 2026, Pellet Press for Sale Manufacturer - General Dies Njdpfxozq E Ave Akiswn Engine Power - 200 Kw Capacity - 2,2 t/h Year - 2014 / 2026 Reconditioned

Condition: new, New equipment MASS International Angled conveyor / flow conveyor L - Conveyor belt with a fixed angle of 35° available for short-term delivery MASS International Angled conveyor NC1 Conveyor belt with a fixed angle and collection trays in the infeed section Example as shown: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height adjustable, discharge height 750 - 1050 mm Fixed angle between the infeed and inclined sections Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Optional: Other dimensions, see standard delivery list Dimensions according to customer requirements FDA-compliant belt Modified belt speed Nedpfjhm Axgox Akiewn etc.

Condition: good (used), Year of construction: 1962, Large band saw with a 1250 mm roll diameter with central cutting device 45 kW motor Nwodefnh T Ispfx Akijn Roll width 120 mm with electric blade tensioning the upper roll has been removed for transport in very good condition, as it has been used little and was overhauled in 1997.

Year of construction: 2023, condition: new, Polyp Scrap Grapple for Cranes Palfinger Hiab Capacity: 300 Lt / 0.3 m3 Nwjdpfx Akonziblsijn Model: 4 Tinned - Half Closed Gross Weight: 450 Kg

Condition: excellent (used), Year of construction: 2014, operating hours: 8,884 h, functionality: fully functional, mileage: 68,462 km, power: 397.17 kW (540.00 HP), first registration: 03/2014, overall weight: 32,000 kg, fuel type: diesel, color: green, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, fog lights, trailer coupling, truck registration, Very well-maintained, fully functional wood chipper. Man TGS 35.540 8x4 with Adblue, Chippo 5010 dT, rotating model. 4272 rotor operating hours. Nodez E S Swspfx Akiown