Used Tire Shredder for sale (10,240)

Condition: good (used), Year of construction: 1996, overall weight: 9,960 kg, JENZ AZ 35 D/Electrical Issue/Shredder/Chipper • Manufacturer: Jenz • Model: AZ 35 D • Year of manufacture: 1996 • Total weight: 9960 kg • Engine: Mercedes-Benz 6-cylinder • Electrical issue • Rotor and beaters in good condition • Discharge conveyor as new • Power: kW/HP • Documentation Lredpfxexb Dkye Adqei • German machine • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes reserved. - Sale according to our terms and conditions.

Condition: used, Opening: approx. 1600 x 1600 mm Lredpfx Ajyvp Shsdqji Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

Condition: used, Double-shaft shredder Ledpfx Asyvp Sbodqjri Drive 37.50 KW

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Ljdpfownx Uiox Adqsri Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: used, machine/vehicle number: 14065, Rotor diameter: 457 mm Rotor width: 1200 mm Ljdsyvlv Nopfx Adqsri Rotor knives: 81 Stator knives: 1 row Infeed opening approx. 1600 x 1200 mm Drive motor: 55 kW

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Ledow Niuhjpfx Adqori Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: used, Year of construction: 2012, power: 264 kW (358.94 HP), Stationary shredder M&J 4000S. Electric drive: 2x 132 kW 400 V AC, 50 Hz Lrsdju Dkf Depfx Adqsi Incl. substructure Incl. hydraulic unit, control cabinet inside of the container

Condition: excellent (used), total power requirement 31,7 kW Lrjdoyvvtrepfx Adqei main drive 7,5 kW Input width 550 mm ca. 25/75 mm ventilator 22kW / 10.800 m³/h Industrial shredder or shredder line with carbide knives for shredding various materials such as wood, cardboard, glass fiber mats or similar, e.g. as pre-treatment for recycling processes. The system consists of two infeed conveyor belts, the chipper and a transport fan.

Condition: used, functionality: fully functional, Tires, wheels and rims Condition: Ready for use and fully functional Technical condition: New Lrjdpfx Adju Dzvtsqei Front tires type: Superelastic Front tires size: 48.5x14-24 Description: Superelastic tires MonoMatic: 48.5x14-24 RIM 11.25 (355/85-24)

Condition: used, Year of construction: 2006, * Doppstadt DW 2560 E-1 electric shredder / wood chipper * Year of manufacture: 2006 * ??Complete repair invoice available?? * Incl. control cabinet * Incl. supports * Weight: 25,000 kg * More pictures and videos via Whatsapp * All information subject to change and prior sale reserved. Ljdoyw Exaopfx Adqeri

Condition: used, Year of construction: 1994, functionality: fully functional, total width: 3,000 mm, power: 15 kW (20.39 HP), Moving floor (pull-type) with leveling roller (diameter 400 mm) and hydraulic unit. Conveyor capacity: 30 m³/h. Lrsdpfxsyvrb Ej Adqsi

Condition: used, machine/vehicle number: 14067, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor knives: 54 Lrsdsyt Ta Aspfx Adqsi Stator knives: 1 row Feed opening approx. 1500 x 1100 mm Drive motor: 37 kW

Condition: new, Year of construction: 2022, Shredder 630 motor: 18,5 kW; 400 V - 50 Hz - 3 ph knives: 30 pieces concave, multiple rotatable rotor diameter: 260 mm Rotor design: EcoRings Control system: PLC Siemens S7-1200 Ljdpfx Adoku Abieqori cutter opening 630 x 820 mm filling volume approx. 0,6 qbm screen perforation: 10 - 12 mm Suction nozzle Ø 160 mm

Condition: used, machine/vehicle number: 13389, Rotor diameter: 390 mm Rotor width: 850 mm Rotor knives: 60 Lrjdpfx Ajyr Tytedqei Stator knives: 1 row Infeed cross-section approx. 1300 x 850 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Lsdpfxjyr Tx Ae Adqeri Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: used, machine/vehicle number: 13289, Rotor diameter: 450 mm Rotor width: 1500 mm Rotor knives: 136 Lredpfx Adsyr Tw Eoqoi Stator knives: 2 x 5 pcs Infeed opening approx. 1500 x 1500 mm Drive motor: 60 kW The machine currently does not match the picture, as it is being overhauled.

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Rotor width: 1500 mm Lredpfx Adjyr Twreqsi Rotor blades: 76 Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Drive motor: 2 x 45 kW

Condition: used, machine/vehicle number: 13298, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor blades: 76 Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Lodpfxeyr Twle Adqjri Drive motor: 2 x 45 kW

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Feed speed: 27 m/min Rotor blades: 2 Stator blades: 1 Infeed cross-section: approx. 10 x 40 mm Lrsdpjyr Tu Rsfx Adqoi Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: used, machine/vehicle number: 13187, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor blades: 54 Stator blade rows: 1 Inlet cross-section approx. 1100 x 1500 mm Drive motor: 37 kW Lrodpfx Adoyr Tudeqoi

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Rotor width: 1200 mm Rotor blade: 66 Stator knives: 1 row Lrjdpfx Ajyr Tttodqji Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW

Condition: new, machine/vehicle number: 12007, Technical data: Cutting area: 700 x 1300 mm Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Lrjdpfxoyr Tpus Adqoi Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: used, machine/vehicle number: 11403, Rotor blades: 2 x 7 stars Rotor width: 1200 mm Rotor diameter: 350 mm Inlet: 850 x 1200 Power: 30 kW Lredsyr Tmyepfx Adqsi

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Ledpfsyr Tlpjx Adqori Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. Lsdpfeyr Tg Tex Adqeri The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Extrusion Waste