Used Tin Snips for sale (66,303)

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Gsdpfx Ageqlckpj Dsui Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Gedpfxexhgawj Ag Doui Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 559761, cutting length (max.): 3,300 mm, cutting width (max.): 1,350 mm, cutting width at rip fence: 1,350 mm, cutting height (max.): 204 mm, saw blade diameter: 550 mm, table length: 3,300 mm, main saw diameter: 550 mm, height adjustment type: electric, overall weight: 2,000 kg, Martin T 65 panel saw with electronically controlled rip fence, 3,300 mm sliding table, maximum cutting width 1,350 mm, maximum cutting height with saw blade D = 550 mm = 204 mm, saw blade diameter D = 250 – 550 mm, extendable longitudinal fence up to 3,220 mm with digital displays, saw blade tilting 0 – 46°, electric positioning for rip fence and height and tilt adjustment via 5.7" touchscreen. Motor 5.5 kW (7.5 HP) with 3 speeds: 2,800 / 4,000 / 5,000 rpm. Double-sided Mitrex mitre fence, additional table support, edging shoe. Extraction connection D = 120 and D = 100 mm. Immediately available ex stock Seevetal, as inspected, excluding freight and packaging, sale subject to prior sale. Gusdpexugt Defx Ag Dsi

Condition: excellent (used), Year of construction: 2011, Programs with touch screen Color Display Godpfxjw U Tk Re Ag Deui Automatic Feeder

Condition: used, Martin type T70 panel saw for edging and sizing wood and other panel materials. Sled length: 2.500 mm Guodpfsxqfghex Ag Dei cutting height: about 100 mm

Condition: used, Planer MARTIN T51 - used - noise-insulated table lips, fence bar, motor brake ----- Technical data ----- Planing width: 51 mm, Table length: 2,520 mm, Max. cutting depth: 16 mm, Cutterblock diameter: 120 mm, Number of knives: 2 pcs, Fence swivel range: 0-45°, Extraction port: 140 mm, Motor power: 4.8 kW Godpfxjxm R Upe Ag Dsui

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately - Gjdpfx Aoxgbwzjg Doui

Condition: excellent (used), Year of construction: 2021, 1 color flexo printing machine Manufacturer: Altinisik Makina Model: AA1290 Year of manufacture: 2021 Format: 1290x1800 mm Gusdetuvuujpfx Ag Dji With skipfeed: 1550mm min. 350x750mm Cardboard thickness with special thickness up to 28mm Speed up to 7,000 Bg/h

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Guodpsxqf Sdjfx Ag Doi Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Year of construction: 2000, condition: good (used), 6 Station: 3 Automatic Feeders (3 x double feeders 1551) 1 Cover Folder Feeder 1 Three Knife Trimmer Müller Martini Typ 1522 Stitching Unit Typ 1550 Belt Delivery Gjdpfx Agjfh It Ue Djui 6 x Station: 3 Automatic Feeders (3 x double feeders 1551) 1 x Cover Feeder Typ 1528 1 x Three Knife Trimmer Müller Martini Typ 1522 Stitching Unit Typ 1550 1 x Müller Martini Pratico Stacker 2 x Handfeeder Speed : 9.000 Cycles / Hour Largest Sheet Size X : 365 mm Largest Sheet Size Y : 305 mm Min. Sheet Size X : 115 mm Min. Sheet Size Y : 105 mm

Condition: used, Year of construction: 2007, Müller Martini Acoro A7 Year: 2007 / 2000 / 1999 Consisting of Gathering machine Müller Martini 3693 Year: 2007 Description: - Chain tensioning station - Hand feeding station - Number of gathering stations: 15 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - PIAB - Reject gate for incomplete products: 3715 - Intermediate element - Book block feeder: 3642 - Transfer into the binder Perfect binder Müller Martini Acoro A7 - 3027 - 22 Year: 2007 Description: - Semi automatic setting - Colour monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - PUR spine gluing unit, interchangeable (nozzle) - PUR premelter for PUR spine glue unit: Meler Micron Pur - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Drum cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Müller Martini Description: - Transport system, length (approx): 60 mtr - Escape delivery Guedpek H Sfhefx Ag Dsi Three knife trimmer Müller Martini Merit S - 3671 Year: 2000 Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Müller Martini CB 16 - 3631 Year: 1999 Description: - Compensating stacker - Turning device - Delivery to the right

Condition: as good as new (ex-display), Forklift mast from a forklift MONTINI MR 2.0 GA length: 2m lifting height: 3,1m with free lift with fork carriage Godpfspgmiqex Ag Deui Was dismantled from a new forklift.

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Gjdst U Rn Sopfx Ag Doui Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -

Condition: good (used), Year of construction: 2002, Müller Martini Graphac Concept UV, 5-color press, Year of manufacture: 2002 Type MM 2 (24”) In very good condition and available immediately. This press has been meticulously maintained and comes equipped with numerous valuable options and components, making it ideal for high-quality UV printing and finishing tasks. Gedpexu I Rwofx Ag Deui Technical specifications: Format range: 16–28 1/8" Cylinder circumference: 24” = 609.6 mm Maximum printing width: 508 mm (minimum 200 mm) Maximum paper width: 520 mm (20 ½”) Maximum roll diameter: 1270 mm (50”) Core diameter: pneumatic – for 70 mm cores (option for 76 mm) Printing sleeves: only one 76 mm spindle for MM 1, 2, 3 (not applicable for Alpha) UV drying: up to 3 UV lamps, 2–3 per unit (air and water cooled) Side register: Yes – switchable Web direction: Main drive 1/3 – straight Web tension control: Work 1+2, Work 2+3 Web tension: 8 mm Printing units: 1 station – central shaft Ø 70 mm Embossing station: 1 station for embossing or die-cutting Matrix waste removal: 2× rewind – double shaft Sheeter: 1 sheeter with Ø 70 mm shafts Punching unit: 2 double punching stations (fixed layout) Die-cutting cylinder: 1 magnetic cylinder with micrometric fine adjustment Cross perforation: window perforation and suitable for 80 g paper Longitudinal perforation: 2 cylinders with 4, 6, 8, 12 divisions – perforation pitch 23.3 mm Punching stations: 2 stations – pneumatic punch removal Slitting: 3× upper, lower and edge trim knives Cross cutting (external sheeter): cross knife Folding: G17 special folding, minimum sheet 210 mm Cross cutting type: 6–24 teeth rotary knife, fully adjustable Unwinder: motorised, roll Ø max 1270 mm, 70/76 mm cores Rewinder: motorised, roll Ø max 1270 mm, 70/76 mm cores Plate mounting: 1 piece 70 mm sleeve, 1 piece 76 mm sleeve for Graphac Printing pressure: 0.14 mm adjustment Web thickness: up to 0.22 mm printing thickness Printing speed: up to 250 m/min

Condition: refurbished (used), Hydraulic variator, e.g. for the feed drive of a PRIMULTINI band saw clamping carriage, including brand-new drive motor 5.5 kW/1440 rpm, individual, manual rapid feed adjustment forwards/backwards including by-pass valve for smooth reversing when accelerating and braking the clamping carriage, with ATOS electric solenoid valve for fast and safe feed-off switching, with 280 mm Ø V-belt pulley Gedpslyqbbefx Ag Deui

Condition: good (used), Year of construction: 1991, Total output: 22 kW Gsdpfx Asxr Au Seg Dsui Operating voltage: 380 V AC Operating current: 46 A Frequency: 50 Hz Pneumatic pressure: 4 bar Water pressure: min. 3.5 bar

Year of construction: 1996, condition: used, machine/vehicle number: 9104662, 6 Automatic Feeders Gusdpfjiyp Elsx Ag Doi 1 Cover Folder Feeder Three Knife Trimmer MM - Practico Stacker

Condition: like new (used), functionality: fully functional, Montini 48 V - 180 A charger Guedpfxjv Tdq Us Ag Dsi Tested by a specialist on March 26, 2025, with a report Condition: like new / barely used

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Guedpfx Aepq If Deg Dei Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2008, condition: good (used), machine/vehicle number: NN42482, Stitching Unit Typ 1550 Presto E90 Three Knife Trimmer Typ 1565 Stream Delivery Typ 1564 3 x Automatic Feeders (6 Station) 1 Cover Feeder Typ 1528 Gedpfx Aenwmqajg Dsui

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: Gedpfx Ajpgkmwsg Dsui T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts Godpfsv Erkaox Ag Doui T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Guodpfxsw D T Dkj Ag Dsi Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Equipment: Gusdpfx Ajr Hr D Neg Dji T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm Gedpfxjqlclbo Ag Doui - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -