Used Tin Snips for sale (1,870)

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Continental, Tires with rim, 4 pieces -Tire size: 23x9-10 PR 134A5 IC30 -Bolt circle: Ø 210 x 11 mm -Hub bore: Ø 190 mm -Delivery/Price: complete -Dimensions: Ø 530 x 220 mm Bdodeyx Dtrepfx Acvea -Weight: 46 kg/unit

Condition: used, tank capacity: 680 l, GENERAL Design: suspended Internal diameter: 850 mm Overall height: 1,550 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 90 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.00 bar Base type: Lugs Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.00 bar Volume: 680 liters Double jacket volume: 55.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,050 mm Last use: chemicals Bodpfsxqc Rdsx Acvoda TANK Max. permissible operating temperature: 134 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top cover MATERIAL PROPERTIES Outside surface: ground Inside surface: ground Feet material: stainless steel

Condition: good (used), Year of construction: 2001, machine/vehicle number: NN7716, Maximum book size: 40cm X 27cm, Minimum book size: 12 cm X 9,5cm Maximum book block size: 40mm, Minimum thickness book block: 3 mm, Max.speed 1500 p/h 4 Clamps, Milling, Bdjdpfx Ajrmkmrscvea Back and side gluing with hot melt

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 abrasion-resistant Bodpfxjyxnrlo Acvjda -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Bolt circle: Ø 145 x 18 mm -Hub bore: Ø 110 mm -Submission/Price: complete -Dimensions: Ø 460 x 200 mm -Weight: 35 kg/pc.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 abrasion-resistant -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 12 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc. Bdedpfoyxnpdox Acvea

Condition: good (used), Tires, tires with rims, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Continental, tire CSE-Robust SC 15 with rim from GSL aerial work platform -Tire size: 23x9-10 PR 134A5 IC30 -Rim: 6.50F-10 604700 ET-17 Bdsdpfxoyxnl Ej Acvsa -Bolt circle: Ø 115 x 15 mm -Hub bore: Ø 65 mm -Submission/Price: complete -Dimensions: Ø 560 x 215 mm -Weight: 43 kg/pc.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 Bedpfxjyxnbaj Acvoda -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 24 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Condition: good (used), Tires, solid rubber tires, forklift tires Bdsdeyxdtxjpfx Acvsa -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 200/50-10 SC 10 RIM 6.50 F -Rim: 6.50F-10 604700 ET-17 -Bolt circle: Ø 98 x 15 mm -Hub bore: Ø 70 mm -Quantity: 26 pieces available -Dimensions: Ø 450 x 200 mm -Weight: 30 kg/pc.

Condition: excellent (used), Year of construction: 2020, Rex Cutting System RSS70 The Rex Cutting System RSS70 is a perfect as a stand alone cutting device equipped with a three edged sickle knife that separates the sausage as the twist section perfectly with no rip to the product. Made from stainless steel ensuring it can be easily cleaned, the REX RSS70 is a highly successful cutting performance machine using either natural or artificial sausage casing. Simple and easy to use large touch screen PLC. Specification Throughput : up to 1200 cuts/min Portion Lengths : Min 40mm Max 800mm Calibre Range : 14 to 40mm Bodpfx Asyq Nmaocvjda Weight 260kg Perfect with all types of sausage filling.

Condition: used, Year of construction: 2007, Bacciottini Pit Stop AF Speed creasing machine and perforating machine Max. format: 500 × 850 mm Min. format: 100 × 150 mm Max. speed (A4 format): 8,000 sheets / h Bedpsyx D Nmjfx Acvoda Paper weight: 80–600 g/m² Creasing & Perforating Performance Max. number of creases per sheet: 100 Distance between creases: 0.1 mm Power supply: 400 V Power consumption: approx. 3.5 kW Machine weight: approx. 230 kg Machine dimensions: approx. 1,600 × 800 × 1,200 mm short-term available

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: V 474260, functionality: fully functional, operating hours: 1,580 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 2,000 rpm, total length: 3,700 mm, total width: 1,950 mm, total height: 1,650 mm, overall weight: 1,250 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, Due to staff shortages or the closure of our joinery, we are selling our Martin T60 Classic panel saw with the following equipment: - Edging table length: 3700 mm - Cutting width: 1250 mm - Parallelogram cross-cut table T74! Bjdpfx Acsyx Iy Aovjda - Extendable support for parallelogram cross-cut table - Digital length stop T74 with 2-point contact and two stop elements - Second support for large panels - Parallel fence for the edging table, mountable on the second support - 3-axis scoring unit, electrically adjustable, T6027-a! - Infinitely variable speed control for the main saw blade, T6076-a! from 2000-5000 rpm - Extraction port upper D = 100 mm - Extraction port lower D = 120 mm - Manual eccentric clamp - DIN A4 document holder - 1 piece hold-down device and push stick - Approx. 10 pcs. carbide-tipped saw blades up to D=450 mm The machine is fully operational and can be thoroughly tested. A 1.6 t forklift is available for side loading onto a truck. Sale includes invoice plus 19% VAT, ex stock Essen.

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Bdodpfx Ajyymtdecvja Terms of delivery: ex warehouse

Condition: used, Year of construction: 2005, Three knife trimmer Müller Martini Esprit (1576) Year: 2005 For three side trimming of book blocks and brochures, operable in connection with book production lines. Description: Bodpfx Asvxfkgscvjda - Colour monitor with touchscreen - Automatic setting - Infeed conveyor from the left - Left hand infeed - Exchangeable cutting tables, number: 3 - 11 - Sets of knives: 2 Technical specifications: - mechanical speed: up to 2.000 cycles/h - size range untrimmed max.: 391 x 320 mm - size range untrimmed min.: 148 x 95 mm - size range trimmed max.: 311 x 305 mm - size range trimmed min.: 142 x 75 mm - book thickness: 2 - 80 mm

Year of construction: 1969, condition: ready for operation (used), machine/vehicle number: 18059, height of centers: 250 mm center distance: ca. 1740 mm max. circulation-Ø over bed: über Bett 500 mm spindle boring: 63 mm Bsdpfxoidiq As Acvjda spindle retainer: Gr. 6 retainer taper tailstock: 5 MK spindle speed: 170 - 2240 rpm forwarding feed: längs/plan 0,014-1/0,0063-0,45 mm/U thread pitch: 0,1 - 112 mm electrical connection: 380 V, 7,5 kW space needed: 3370 x 1000 x 1400 mm weight: 2360 kg

Condition: used, Year of construction: 1967, Center height: 300 mm Center width: 1000 mm Swing diameter: over bed 610 mm Spindle bore: 71 mm Bdjdpfxovzn E So Acvja Spindle mount: size 8 Tailstock taper: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/transverse 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space required: 2900 x 1450 x 1750 mm

Year of construction: 2021, condition: used, MULLER MARTINI Casing-In Machine EMP 513 type K317 year 2021 For casing-in of flat spine book blocks into hard covers, as well as subsequent pressing and joint-forming of books. To be used as an individual machine. Configuration: copilot system with 2 touch screens block supply via feeding conveyor and star feeder case prestacking conveyor case magazine case bending machine case forming station casing-in gluing station with profile rollers and adjustable double glue application for the book joint area glue circulation system with pump EMP glue pump monitoring unit rubbing down unit and thin book device electronically heated 15° joint forming rails, controlled in pairs via regulator quick-change system for joint forming rails 2 pressing stations heater monitoring unit servo-controlled drive technology based on Siemens SIMOTION D delivery to the left, transport of books lying flat Special equipment: photo book block splitter hotmelt nozzle gluing unit for joint gluing NORDSON premelter Code-Matching (comparison) between book block and case via data matrix code, barcode sensor: Cognex camera double case control special equipment for the processing of flexible cases Technical specifications: mechanical speed: up to 30 cycles/min size range book block max.: 280 x 375 x 80 mm size range book block max.: 305 x 375 x 30 mm size range book block min.: 100 x 100 x 2 mm size range opened case max.: 660 x 385 mm size range opened case min.: 210 x 105 mm thickness opened case max.: 7,0 mm thickness opened case min.: 0,1 mm size range finished book max.: 285 x 385 x 90 mm size range finished book max.: 315 x 385 x 30 mm size range finished book min.: 105 x 105 x 6 mm KOLBUS Transport Conveyor System Bdedeyr Hk Sopfx Acvea year 2021

Condition: used, Year of construction: 2025, Book stacker Müller Martini BLSD 650 (A501.1000) Bdsdpsyr E Dkefx Acvsa Year: 2025 Description: - Compensating stacker - Turning device: 90 & 180 degrees - Roller table delivery Max. mechanical speed: up to 65 cycles/min Maximum size range: 390 x 285 x 90 mm Minimum size range: 115 x 100 x 5 mm Maximum pile height: 340 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade Bdjdpfsif Ek Rox Acvsa • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools Bsdpfx Aofnlkwecveda • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified. Bdsdpfxefhgvwo Acvsa

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Bodpewgc I Rjfx Acveda Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Bjdpfx Aexgbwzecveda Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Bjdpfx Acjt U Rn Ssvjda Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Bdodpoya Hvqsfx Acvea Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: like new (used), Year of construction: 2020, The Easymount EM-1200DH is a wide format double hot roller laminator engineered for both laminating and mounting applications. It supports hot and cold lamination, allowing you to laminate prints and graphics, mount prints to boards, and apply vinyls, tapes, and adhesives. Key features include: - Maximum lamination width of 1200 mm (47 inches) - Laminating speed of up to 3.9 meters per minute - Mounting thickness capability up to 25 mm (1 inch) - Variable speed settings for precise process control - Reverse mechanism for correcting lamination errors or jams - Heat-assisted rollers for consistent, high-quality results This machine is suitable for mounting wide images with sheet film and for continuous mounting with roll film, providing versatility for various print finishing requirements. It is designed to be durable and reliable for professional use in wide-format finishing environments. Bdedpfsych Utsx Acvsa