Used Kolbus for sale (76)

Year of construction: 2023, condition: used, Case maker Kolbus DA 370 Year: 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game boards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps - device for small format - device for large format - Remote Service Gateway Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 205 x 670 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width open: up to 19 mm - Cloth width: 223 - 708 mm - Cloth height: 158 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm - Centre strip roll thickness: 0,3 - 0,6 mm - Centre strip roll width: 6 - 90 mm Gkedpfsv N Ep Dsx Afiod - Lining width: 195 - 670 mm - Lining height: 130 - 390 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, The system consists of the following components: Perfect Binder KM 410.C – 24 clamps Gathering Machine ZU 840.B 2 cutting stations Robatech premelters XRT 951 and 950 / ICS 160 Transport and cooling belt AK-6365-02 Three-knife trimmer HD 151.P Gksdpfx Afsxvyhdsied Müller Martini stacker Note: 6 trucks are required for transport.

Condition: used, Transport Band z.B. für Klebebinder / Transport Belt for example for Perfect Binder Kolbus FS.L 683 Transport Band / Transport Belt Kolbus FS.L 683 Baujahr / Year 1988 - SN. 737 mit Eigensteuerung / with SelfControl Geschwindigkeit regulierbar / Speed ​​adjustable Höhenverstellbar / Height adjustable Bandlänge / Band length 150cm, Bandbreite / Band width 38cm Bandhöhe / Band high 90cm Gedpfexvcntex Afiokd Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kolbus NM + PK + SW Offered as a bundle Machines are available for demonstration Gjdswxvfgepfx Afiskd (The Hörauf laminating machine shown in the video is not included in this offer)

Condition: good (used), Year of construction: 2019, functionality: fully functional, The Kolbus AB300 is a fully automatic, modular machine for manufacturing corrugated cardboard boxes, capable of producing various box styles (such as 0201, tray, wrap, and pallet boxes). Key specifications include a maximum speed of up to 100 m/min, fully automatic set-up via touchscreen, a maximum blank width of 2590 mm (102 inches) with unlimited length, and the ability to produce over 100 different box styles. The machine offers high flexibility, enabling quick changeovers between different sizes and styles. Technical Specifications Maximum Speed: Up to 100 m/min Widths: From 100 mm up to 2590 mm (102 inches) Length: Unlimited Gjdpexpga Tsfx Afiokd Box Types: Over 100 different box styles, including 0201, wraps, pallet boxes, and partitions Control: Fully automatic set-up via touchscreen Energy Efficiency: Up to 75% energy savings compared to conventional machines Material: Suitable for all types of corrugated board Optionally available: Godswill gluing machine Type: GSS-600 / GSS-600L Stitching speed: max. 600 stitches/min Number of stitches: 1–99 stitches Stitch length: 10 mm Stack height: 850 Max. product size: 1600 mm W × 1500 mm L / 2250 mm W × 2500 mm L Power: 12.5 HP / 14 HP Machine weight: 4000 kg / 4500 kg

Condition: used, Year of construction: 1992, The Kolbus KM 470 is a robust perfect binder designed for professional bookbinding operations. This machine integrates a comprehensive gathering system, specifically a ZU gathering machine with 18 stations and a hand feeding station, allowing for efficient collation of book blocks. The KM 470 perfect binder itself features 25 clamps, ensuring secure handling of book blocks during the binding process. It is equipped with a milling station for precise spine preparation, followed by hotmelt spine and side gluing stations for strong, durable binding. The Stream Cover Feeder automates cover application, while the nipping and pressing station guarantees a tight, professional finish. The machine also includes a lay down device for smooth transfer of book blocks, though it does not have drying conveyors. Finally, the Kolbus OMG stacker organizes the finished products for easy handling. Manufactured in 1992, this system is currently operational in a printshop in Germany and is capable of processing book blocks up to 310 x 390 x 60 mm in size. Format: 310 x 390 x 60 mm Equipment: Gathering Machine Type: ZU Gathering stations: 18x Year: 1991 Hand feeding station Perfect Binder Type: KM 470 Year: 1991 Number of clamps: 25x Clamps Milling station Hotmelt spine gluing Hotmelt side gluing Cover feeder: Stream Cover Feeder Nipping and Pressing station lay down device Drying Conveyor Length of the drying conveyor: no drying conveyors Stacker Type: Kolbus OMG Year: 1992 Gedpfx Aew R A Ecefijkd Machine no. 42

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Gkedpfx Afjxuad Aoijd Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2020, Boxmaker from Kolbus, model TF 200 & BX 20, year of manufacture 2020 Gkedpfexlaf Uex Afiod

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 34, Kolbus Casemaker, complete with pallet feeder type PPA290 Case – size range opened case (width x height) min. 300 x 210 mm, max. 1050 x 735 mm Cloth (width x height) min. 765 x 200 mm, min. 1080 x 290 mm Boards Thickness min. 1 mm, max. 4 mm Mechanical speed: Up to 40 cycles/min Board in-feed, Stiff spine in-feed, Flexible spine in-feed from roll, In-feed cloth, glue tank, glue rollers, pressing device, delivery belt Gksdpjwnqtksfx Afijd Machine no: 34, Books produced: 2 million

Condition: used, Year of construction: 2005, Perfect binding line Kolbus ZU 841.A - KM 473 Year: 2005 Consisting of Gathering machine Kolbus ZU 841.A Year: 2005 Description: Gkedpfx Aoxd Dm Hefiod - Colour monitor with touch screen - Number of gathering stations: 20 (15 x incl Signalynx bar code reader),( 4 x Optoelectronic signature recognation) - Air center: Variair - Set up element - Transfer into the binder Perfect binder Kolbus KM 473 Year: 2005 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson Durapail - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder: SAL 411.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down delivery Transport system Kolbus Description: - Escape delivery Conveyor tower: 2x Max. mechanical speed: 8.000 cycles/h Maximum size range: 383 x 320 x 70 mm Maximum size range: 460 x 190 x 70 mm Minimum size range: 105 x 100 x 3 mm

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 33-010, 16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system. Gedpeh T Dhqefx Afiekd

Condition: used, Year of construction: 2000, Board cutter Kolbus PK 170 Year: 2000 For cutting board sheets into finished cut-to-size blanks in 2 operating processes. Description: - Hand feeding - Magazin for second cut (strips) - Circular knives, 8 Gkjdpfexp Np Rsx Afiod - Belt delivery - Waste removal conveyor

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Gksdpfx Ajwdgfzjfijd Year: 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Gkjdpjwmb I Asfx Afiod Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 1996, condition: used, Co-pilot, starfeeder, rounding & backing, gluing, gauzing, book mark suction device, gluing, head & tail banding, pressing, casing-in, case prestacking, case bending, case forming, Kolbus FE 603, Kolbus DS 391 Hard cover book line Consisting of: Kolbus BF 525 - FE 603 - DS 391 Year: 1996 - 2000 - 2002 Hard cover book line Kolbus BF 525 + FE 603 Year: 1996 - 2002 Description: - Automatic setting - Co-Pilot with touchscreen - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 603 Year: 2000 Description: - Pressing station - Right hand infeed - Integrated hydraulic - Straight delivery Book stacker Kolbus DS 391 Year: 2002 Godpfx Ajvw Al Eefiekd - Turning device - Delivery in reverse direction - Straight delivery Book production line: Compact 2000 SC Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 125 mm Book block format (max): 270 x 375 x 80 mm Book block format (min): 100 x 125 x 4 mm Max. mechanical speed: 50 cycles/min -: - Book forming and pressing machine: FE 603 Product size (max): 315 x 385 x 90 mm Product size (min): 70 x 100 x 6 mm Max. mechanical speed: Up to 62 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2009, Palletiser Kolbus PL 771 Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Turning device - Stacking robot - Air table - Pallet dispenser - Slip sheet feeder - Pallet delivery station Technical specifications: - Infeed speed: up to 30 piles/min Gkedpfsxg Nzhox Afiod - Stack size max.: 563 x 406 x 350 mm - Stack size min.: 150 x 100 x 25 mm - Pallet size max.: 1.340 x 1.000 mm - Pallet size min.: 1.000 x 800 mm - Loading size min.: 900 x 700 mm - Palletizing height max.: 1.600 mm incl. pallet - Loading capacity max.: 1.500 kg/pallet

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Gkedpfx Afet Rmhasijd Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer Gkjdpfx Afjv N U U Neiod - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Year of construction: 2019, condition: used, Case maker KOLBUS DA 270 Bookjet Edition Year 2019 For fully automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Description: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation proces - Counter stacker delivery with following roller conveyor - Cloth cylinder with grippers and exchangeable plates for rubber pa (5 pieces 500 mm wide and 5 pieces 720 mm wide, incl. 10 pieces of rubber pads) - Centre strip pressing device (head / tail) - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults Gkedpfx Afjr Aba Seisd - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D additional equipment - Without centre strip roll device - Board centre strip cutting device (cross centre strip) For processing digital print products of varying centre-strip. - Device for cutting rigid centre board strips to width, with possible width variation from cycle to h data coupling via AFS 702.W with input and output code reader for digital print finishing - Processing of Hotmelt with premelter LH 375.B Technical specifications: Open cover size: Max. 670 x 390 mm Min. 205 x 140 mm Joint width: 4 - 15 mm Spine width: 14 - 120 mm Turn in width closed: 8 - 15 mm Cloth: Width: 223 - 708 mm Height: 130 - 428 mm Boards: Thickness: 1 - 4 mm Width: 95 - 328 mm Height: 140 - 390 mm Board centre strip: Thickness: 1 - 4 mm Width: 6 - 90 mm Mechanical speed: up to 65 cycles/min

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Godsvqbhlopfx Afiokd Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2004, Three knife trimmer Kolbus HD 142.P Year 2004 Description: Godpfxjwnbv As Afijkd - Co-Pilot with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Kolbus: HD 142.P Maximum size (cutted): 305 x 420 x 80 mm (WxHxT) Minimum size (cutted): 100 x 100 x 2 mm (WxHxT) Maximum size (uncutted): 310 x 430 x 80 mm (WxHxT) Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2013, De-stacker Kolbus TS.A Year: 2013 Gsdpfswx E Svex Afijkd Description: - Stack feed belt (rolls) - Belt delivery - Standard equipped

Condition: used, Year of construction: 2004, Feeder(s) for gathering machines Kolbus ZU 840 Year: 2004 Gedpfewut D Ejx Afiskd Description: - Number of feeders: 16 - ATC thickness control - Pump(s): Nash-Elmo -Set up element -Intermediate element Feeders can also be sold individually. To be used for feeders or extension of existing machines!

Condition: used, Year of construction: 2004, Book block feeder Meccanotecnica - Kolbus Feedo - XMT 280 Year: 2004 Gkjdpfewutp Iox Afijd Description: - Left hand infeed - Pre stacking conveyor

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 150.B Year: 2005 Godpovf Dtysfx Afiekd Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2