Used Coiling Machine for sale (64,480)

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Bodpfoif Sg Sex Aa Uecw Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Bcsdpfsw A Iilox Aa Usw Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: new, Year of construction: 2025, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Bcjdjw A Ik Njpfx Aa Uew Cutting area 6000 × 1500 mm X‑axis travel 1520 mm Y‑axis travel 6020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L × W × H) 14500 × 2300 × 2380 mm Floor footprint 15500 × 2800 mm Net weight 6000 kg Fully automatic cutting, material saving, fast speed

Condition: used, machine/vehicle number: 6099, Coil winding machine HDR type 20.1/89 Bsdpfx Aajyl Ntis Uscw Winding diameter: 200 mm, laying width: 350 mm Max. wire diameter: 2.5 mm

Condition: used, machine/vehicle number: Nr. 84064. Nr. 86016 Nr. 82013, 3 winding machines, 4-fold flyer Winding diameter: 40 mm, laying width: 150 mm Bjdpfx Ajylzurea Uecw Max. wire diameter: 1.0 mm HKW 2/7 no. 82013, 4-fold reversing bar Tool EI 84/20/5

Condition: used, machine/vehicle number: 85252. und 85122, Coil winding machine Aumann WG 85253 Winding diameter 160 mm, laying width 550 mm Wire guide DF 50 No. 85099 defective Bodjylztuopfx Aa Uecw Coil winding machine Aumann PW 85122 Winding diameter 100 mm, laying width 200 mm Wire guide DF 70 No. 85115

Condition: used, machine/vehicle number: 8528, Coil winding machine Blume und Redecker AM 2100 Winding diameter: 330 mm, laying width: 700 mm Maximum wire thickness: 2 mm Bcjdpsylzr Refx Aa Ujw

Condition: used, machine/vehicle number: 10458, Coil winding machine Meteor M 10 Winding diameter: 80 mm, winding width: 60 mm Bsdpfx Aaoylzqte Uscw Max. wire thickness: 0.3 mm

Condition: used, machine/vehicle number: FN 100, Coil winding machine Winding diameter: 120 mm x 200 mm Bodpfx Aoylzn Ssa Uecw Maximum wire thickness: 0.3 mm

Condition: used, Micafil winding machine Winding diameter 160 mm, laying width 400 mm Wire diameter 0.06 - 1.5 mm Bodpfx Aoylzmuoa Uocw

Condition: used, machine/vehicle number: 8544, Coil winding machine Blume und Redecker AM 100 Winding diameter: 200 mm, laying width: 600 mm Bcedpsylzghsfx Aa Usw Maximum wire diameter: 2 mm

Condition: used, functionality: fully functional, Coil winding machine Froitzheim und Rudert Winding diameter 250 mm, winding width 500 mm Bodpfx Ajylydloa Ujcw Pneumatic tailstock

Condition: used, Bobifil winding machine, 1 flyer, 4-position rotary table Winding diameter: 250 mm x 70 mm Wire: 0.1 - 1.75 mm ø 5 units Bcodjylwmdopfx Aa Usw K available

Condition: ready for operation (used), machine/vehicle number: 90002, Kandula coil winding machine FDW 500/2 Max. spool: 200 x 300 mm Max. wire: 1.5 mm Bedpoyll Agefx Aa Ujcw

Year of construction: 1995, condition: ready for operation (used), A Schenker spring coiling machine including a 2-finger coiling system (left and right), a multiple stroke device and a Böhm MRS-1 length measuring device is available. Wire diameter range: 0.4mm-1.8mm, spring outer diameter: 2mm-30mm, production capacity: 400 springs/min, max. material strength: 2400N/mm², spring outer diameter range: 2mm-30mm, wire feed length: 30mm/470mm/770mm/1200mm. Machine dimensions X/Y/Z: approx. 1150mm/900mm/1450mm, weight: approx. 1000kg. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation available. On-site inspection is possible. Bcsdpsv Ip Smjfx Aa Usw

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Bcedpfx Aovripmea Uew

Condition: used, Year of construction: 1959, functionality: fully functional, machine/vehicle number: D32L/7511, Offer Number: D32L/7511 Machinetype: spring coiling machine Make: WAFIOS Type: UFM8 Constr. year: 1959 Bedpfx Aaswi S Rms Uocw wire diameter: 0,2-0,8 mm spring diameter: 20 mm feeding length: 3910 mm output pieces/min: 220 Location: In our warehouse

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Coil joining machine. With Fronius Trans Tig 2200 Job G/F Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Used machine in working condition. Strip width: 15 – 80 mm. Strip thickness: 0.5 – 1.5 mm. Bodpfx Aolddxhoa Uscw Power: 400 V / 50 Hz. Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Condition: used, machine/vehicle number: 004877, Max width workable: 1300 mm Bsdpfowcx Ufox Aa Uecw

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, wire diameter (max.): 4 mm, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, feed length Y-axis: 20,000 mm, The machine is in full working order. It is being sold complete with a mechanical rotary table. The automatic rotary table shown in the photos is not included in the offer. Bcsdpjyhcq Tofx Aa Uow

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller Bcsdpfexw Rcuex Aa Ujw - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: new, type of cooling: air, Collection of new high-quality fan coil units and accessories available. These units are designed to regulate temperature, humidity, and air quality within a given space. By leveraging a combination of fans and coils, they effectively distribute conditioned air, ensuring a comfortable and productive environment. We have a collection on offer, consisting of 74 pieces. This includes mostly Carrier models, some Ciat units and accessories to accompany the fan coil units. Bsdpfxotnccko Aa Ujcw Included in this collection are: 37x Carrier 42NL, 5x Carrier 42NH, 7x Nordmann AT4, and 4x Ciat CLEAN LINE H14 1000M3/H among other units and accessories. A summarized and detailed list of what's included is provided in the photos of this listing. Please contact us if you are interested in the detailed description of these new fan coil units and accessories.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: D32L/8407, Offer Number: D32L/8407 Bedpfxewzkr Hj Aa Ujcw Machinetype: spring coiling machine Make: SCHENKER Type: 20RU Constr. year: 1998 wire diameter: 0,5- 2 mm Location: In our warehouse

Condition: repair required (used), Year of construction: 2014, functionality: not functional, Spring coiling machine from HTC / Manentimacchine SRL incl. camera technology HTC16CF Bjdpjtdrkmofx Aa Uocw Not ready for operation - conversion would be possible for a surcharge of EUR 4,000 per machine. The machine is available for sale twice.

Condition: used, functionality: fully functional, machine/vehicle number: D32L/8410, Offer Number: D32L/8410 Machinetype: spring coiling machine Bodpfjxnyi Eox Aa Uecw Make: WAFIOS Type: FS3 Constr. year: wire diameter: 0,2-1,8 mm spring diameter: 35 mm feeding length: 1.500 mm feed length: Location: In our warehouse