Used Thread Coiler for sale (2,664)

Condition: used, Thread cutting head with chaser jaws, thread cutting stock,Tapping machine, pipe thread cutter, cutting head Ltsdpfef Ec S Sox Aa Eea -Thread cutting head: 1/2- 2 " -Cutting jaws: R1 -1 1/2 " -Dimensions: 870/110/H200 mm -Weight: 11 kg

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 Ledpfx Aaswmnhpj Eota - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Ltsdpfx Aoh A S Htea Eja Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. For more information, please contact us. Ltjdpfx Aaow Al U Ej Eea

Condition: used, Year of construction: 1978, Gewinde-Ø 52 mm Lsdpewt T Uhofx Aa Eeta threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm Ltsdpfx Ajtxkunja Eoa -Weight: 0.7 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm Ltsdpfsrt Unwox Aa Eea - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW Ljdpfx Aaeuz If No Ejta - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW Ledpfx Aaev N N Sco Esta weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder, size: Z52/2B, + 21B • 5 sets of chaser jaws, pitch 1 - 2,5 mm Machine is in a good condition.

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch thread: 1/4 - 1 inch -Dimensions: 385/120/110 mm Lodpfx Aed Scp Tea Esta -Weight: 5.1 kg

Condition: used, Micrometer, micrometer screw -Measuring range: 125 - 150 mm -Handover: as is as seen -Accessories: missing, see photo -other sizes: available -Dimensions box: 330/180/H30 mm Ledefn Am Ropfx Aa Esta -weight: 1.1 kg

Condition: used, Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Handover: as is as seen -Accessories: missing, see photo -other sizes: available -Dimensions box: 265/145/H30 mm -Total weight: 0.7 kg Lodpefn Am Tjfx Aa Ejta

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/2 ", 3/4", 1 ", 1 1/4", 1 1/2 " Ltedsdm T S Aspfx Aa Eja -Dimensions: 510/360 / H240 mm -Weight: 64 kg

Condition: used, Ball valve internal thread -Internal thread: 2 -Full: passage, full ball -Number: 10x available -Price: per piece Lsdpsb A Sa Ssfx Aa Esta -Weight: 0.2 kg

Condition: used, End mills, milling cutters, shank thread mills, thread cutters -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutter -Recording: Ø 27 mm 25 pieces, O 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price: complete -Dimensions: 240/180/H150 mm Lodpsgfcm Refx Aa Eota -Total weight: 4.2 kg

Condition: used, Tapping machine, pipe thread cutter -without tools Ltedpfx Aefyh Ebja Eja -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg

Condition: used, Ball valve internal thread Ljdeb A Sa Tjpfx Aa Esta -Internal thread: 2 -Full: passage, full ball -Number: 3x available -Price: per piece -Weight: 1 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch thread: 1/4 - 1 inch -Dimensions: 550/120/100 mm -Weight: 4.7 kg Ljdod Scp Uopfx Aa Ejta

Condition: used, Ball valve internal thread -Internal thread: 2 Lodpfxeb A Sbae Aa Eeta -Full: passage, full ball -Number: 7x available -Price: per piece -Weight: 1 kg

Condition: used, Micrometer, micrometer screw -Measuring range: 75 - 100 mm Ltjdpfx Aaofn Am Uo Eea -Accessories: see photo -other sizes: available -Dimensions box: 265/125/H25 mm -Total weight: 0.8 kg

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/4 "- 2" -Dimensions: 510/360/H240 mm Ltsdpfodm T Tbox Aa Eoa -Weight: 64 kg

Condition: used, Ball valve internal thread -Internal thread: 2 -Full: passage, full ball -Number: 5x available Ljdpfxsb A Sa Re Aa Eeta -Price: per piece -Weight: 3 kg

Condition: used, Ball valve internal thread -Internal thread: 2 Ltsdpfx Ajb A Sa Uea Eja -Full: passage, full ball -Number: 24x available -Price: per piece -Weight: 1 kg

Condition: used, Thread cutting dies, replacement dies, thread cutting heads with chasers, thread cutting stock, thread cutting machine, pipe thread cutter -various: thread cutting sizes -Price: complete Ltedjd Aay Dspfx Aa Eea -Weight: 12 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch threaded jaws: 1/2 "- 1 1/2" inches -Weight: 9.5 kg Ljdpfx Aaoc T Nx No Eeta