Used Thick Plane for sale (10,736)

Condition: excellent (used), Planer width 510 mm Gjdps Aaw H Nefx Acgsui Min/Max. working height 3 - 240 mm Motor power 4.0 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planer knives 4 pcs Dimensions of thickness table 510 x 850 mm Feed speed 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 120 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Articulated pressure bar 2 pcs under-table rollers Low-voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the Machinery Ordinance 1 set of spare planer knives Dimensions approx. L x W x H = 1000 x 900 x 1450 mm Weight approx. 900 kg Note regarding used machines: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works and include free loading. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address and telephone number!)

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Indicator for planing thickness: mechanical counter Feed rate: 7-11-15-19 Infeed roller: steel, segmented Pressure bar: segmented Outfeed roller: rubber Table rollers: no Table extension: yes, infeed and outfeed Gsdpfx Acohpl T Hogsui Motor power: 7.5 kW Dust extraction connection: 160 mm Machine length: 1070 mm Machine width: 900 mm Weight: 750 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 50 h, Fimal thickness planer, manufactured in 2022, in like-new condition. The machine has been used for a maximum of 50 hours. Therefore, it is in very good condition! Working width: 63 cm Gusdpfx Acjz S Ulzogsi Electric table adjustment Includes new Tersa replacement blades. Optionally, a matching Fimal PF530N jointer, manufactured in 2022, can also be purchased. See the last pictures. - Thickness planer Fimal S63A (individual price: €7,500) - Jointer Fimal PF530N (individual price: €6,500) Total price for both machines together: €12,500 Optionally, a suitable dust extraction system can also be purchased. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses with exclusion of liability for defects. No guarantee, warranty or right of return.

Condition: new, Year of construction: 2026, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard with noise and chip protection curtain at infeed and outfeed Adjustable pressure for feed rollers Front infeed roller with helical toothing Outfeed roller with rubber coating Gedpfx Acoy Eg Apegsui Powerful industrial motor Equipment Details TERSA models with Tersa cutterhead Cutter changes in seconds When the machine starts, centrifugal force automatically tensions the blades – self-locking Blade projection adjusts automatically without the need for setting gauges Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard with electric table adjustment A special lifting system ensures the table position is perfectly maintained even without mechanical locking Helical-toothed steel infeed rollers for constant and uniform wood feed Second, rubber-coated outfeed roller Heavy-duty anti-kickback devices prevent kickback of workpieces A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser 150 mm Drive Performance Main motor 9 kW Installation information Space requirement length 1305 mm Space requirement width/depth 1080 mm Space requirement height 1197 mm Space requirement explanation: Measurements account for maximum travel or usable length. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Working area explanation: Please add stated dimensions to space requirement to obtain the recommended clear installation area for the machine. Thicknessing Thickness table length 630 mm Thickness table width 1000 mm Min. working height 3.5 mm Max. working height 300 mm Min. working length 210 mm Max. cutting depth 8 mm Electrical Data Connection voltage 400 V Phases 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of blades 4 Speed 4,500 rpm Max. planing width 630 mm Feed Speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Condition: new, I sell the combined surface planing - thicknessing machine VITAL FS32N. New machine. Max. working width 320mm Spindle 3-knives 320x100mm Main spindle + Feeding motor 3,0 KW. Total weight 360kg. Surface planer: Max. construction cutting take-out 5mm Table dimensions 1500 x 320 mm / 750 mm input + 750 mm output Aluminium fence dimensions 1100 x 155 mm / adjustable 0–45°. Thicknesser: Gjdpfx Aeq Dzkmjcgeui Max. construction cutting take-out 4mm Max. working thickness 4-230mm Feeding speed 8 m/min. 1+1 top pressure rollers with anti kickback device. Working thickness adjustment manual . Dust extraction hose diameter 120mm. European product, made in EU, with CE certificate and instruction manuals. New machine with 12 months warranty. Machine in stock in Kežmarok, Slovakia, possibility to test. Possible to buy the additional mortiser with adjustable table. Price 700 Euro. On stock.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Gedpjy Eizusfx Acgoui Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately

Condition: good (used), Year of construction: 2001, machine/vehicle number: 3060, functionality: unexamined, power: 5.5 kW (7.48 HP), input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 520 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,600 rpm, rotational speed (min.): 5,600 rpm, overall weight: 570 kg, Equipment: CE marking, Sicar Thicknesser Forte 520, Thicknessing width 520 mm, max. workpiece height approx. 293 mm, Motor 5.5 kW, 400 Volt, 50 Hz, Godpfx Acoy E Rzijgoui 4-knife Tersa cutterblock, as inspected, Ex Works, from location Seevetal, subject to prior sale.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 410 mm, planer shaft diameter: 100 mm, Equipment: low noise, Surface and thickness planer ADH 5-410 *available for immediate delivery* Demonstration machine from the showroom (factory-set and planed). -Spiral cutterhead with 66 knives (3 rows of 22 knives) 15 x 15 x 2.5 mm -Surface planing width 410 mm -Work table dimensions, surface planer: 1800 x 410 mm -Work table dimensions, thickness planer: 700 x 406 mm -Cutterhead diameter: 100 mm Gsdohm Stpepfx Acgjui -Cutterhead speed: 4500 rpm -Chip removal, surface planing: max. 5 mm -Surface planing fence, anodized, dimensions L x W: 1100 x 155 mm -Cutterhead guard, adjustable, standard -Dust extraction port diameter: 120 mm -Thickness planing width: 406 mm -Minimum – maximum thickness: 4 – 225 mm -Chip removal, thickness planing: max. 4 mm -Feed rate: 8 m/min -Motor power: 400 V / 50 Hz, 4.0 kW -Digital display for thickness table adjustment, standard -Footprint (L x W): approx. 2000 x 1000 mm -Weight: approx. 450 kg -Can be moved with a pallet truck, standard -Paint finish: light gray / graphite gray 7035/7024

Condition: new, Year of construction: 2026, Working width: 530 mm Planing cylinder: Tersa Number of knives: 4 Jointer table length: 2300 mm Adjustable angle of the jointer fence: yes Raising of the jointer table: electric Maximum stock removal thickness (thickness planer): 250 mm Height adjustment of the thickness table: electric Display of the planing thickness: digital Feed rate: 5 / 7 / 9 / 12 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: continuous Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Dust extraction connection: 140 mm Gedpfxezqyw Us Acgsui Machine length: 2300 mm Machine width: 990 mm Weight: 750

Condition: ready for operation (used), machine/vehicle number: 50321997, functionality: fully functional, input voltage: 380 V, input current: 11 A, input frequency: 50 Hz, For sale is a jointer and thickness planer manufactured by Kölle. The machine is fully functional and can be inspected at any time. Gujdpfs Aia Syjx Acgji Price does not include delivery.

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox Guedpfx Ajyzc Efjcgsi 4-spindle thickness table guide Electric thickness table adjustment

Condition: new, I sell the combined surface planing - thicknessing machine VITAL FS41N. Gjdsq Dzk Hjpfx Acgeui New machine. Max. working width 410mm Spindle 3-knives 410x100mm Main spindle + Feeding motor 4,0 KW. Total weight 420kg. Surface planer: Max. construction cutting take-out 5mm Table dimensions 1800 x 410 mm / 900 mm input + 900 mm output Aluminium fence dimensions 1100 x 155 mm / adjustable 0–45°. Thicknesser: Max. construction cutting take-out 4mm Max. working thickness 4-230mm Feeding speed 8 m/min. 1+1 top pressure rollers with anti kickback device. 2 bottom rollers in table for better feeding of wet or heavy parts Working thickness adjustment manual . Dust extraction hose diameter 120mm. European product, made in EU, with CE certificate and instruction manuals. New machine with 12 months warranty. Machine in stock in Kežmarok, Slovakia, possibility to test. Possible to buy the additional mortiser with adjustable table. Price 700 Euro. On stock.

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Planer-thicknesser machine with 520 mm planing width and motorized thickness table adjustment Stable steel cast iron construction Large, ribbed planer tables made of cast iron, annealed to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table adjustment with two speeds and digital display Segmented pressure shoes in the infeed Guedpobxz S Hjfx Acgoi 4-knife cutterhead, precision-mounted Helically toothed steel feed roller for particularly even and gentle wood feed Take-off roller with rubber coating Large planer fence, adjustable 90°-45°, readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutterhead Knife changes in seconds When the machine starts, the knives are automatically tensioned by centrifugal force - self-clamping The knife overhang adjusts automatically without adjustment or screwing The planer table is adjusted by a stable and precisely guided parallelogram system, ensuring that the distance between the table tips and the cutterhead remains the same in every adjustment position. The stable aluminum planer fence is anodized as standard, easily adjustable, and offers a generous support surface. The adjustable inclination from 90° to 45° is easily readable from the workstation. Standard with an auxiliary fence for safe planing, even of narrow workpieces. Fig. with optional equipment The connection point for the dust extraction is always in the same position, both for planing and thicknessing. This eliminates the need for additional dust extraction hoses or cumbersome repositioning and routing around the machine. Technical data Total length of planer tables 2300 mm Infeed table length 1180 mm Planing width 520 mm Dimensions of planer fence 1200 x 190 mm Swivel range of planer fence 90 - 45° Min./Max. planing height 3/250 mm Cutterhead diameter / number of knives 100 mm / 4 pcs. Feed speed 5/8/12/18 m/min. Speed 5000 rpm Motor power 400 V / 50 Hz / S6 Dust extraction port diameter 120 mm Weight 1020 kg Top machine Location: Bitburg - available immediately

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, Guedpfxsu R S Awo Acgji table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: used, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,200 rpm, total width: 1,200 mm, total height: 1,300 mm, overall weight: 950 kg, Equipment: documentation/manual, – Year of manufacture: 2016 – Manufactured in Belgium – Declaration of Technical Requirements (DTR), CE marking TECHNICAL SPECIFICATIONS: – Planing width: 630 mm – Planing height: 300 mm – Motor power: 7.5 kW – Number of knives: 4 pcs – Shaft diameter: 120 mm – Rotational speed: 5200 rpm – 2 rollers in the table – Electric height adjustment – Feed motor power: 0.75 kW Gjdpfx Acszq Dndsgoui – Table height adjustment motor power: 0.55 kW – Anti-kickback pawl row – Toothed feed shaft – Two smooth steel feed shafts – Stepless feed speed adjustment: 5 - 22 m/min – Maximum chip thickness: 8 mm – Dust extraction nozzle diameter: 160 mm – Thickness planer table dimensions (length/width): 1160 x 630 mm – Machine dimensions (length/width/height): 125 / 120 / 130 cm – Weight: 950 kg

Condition: excellent (used), Catalog number: 7734 TECHNICAL SPECIFICATIONS - Shaft width: 630mm - Max thickness of workpiece: 230mm - 4-knife planing shaft * Top: - Ratchets - Toothed infeed shaft, pulling - Pressure roller - Planing shaft - Pressure roller - 2 smooth, pulling outfeed shafts * Bottom: - Adjustable roller in the lower bed Gsdpfxjztxg Te Acgeui - Motor approx. 7.5kW - Smooth feed speed adjustment - Diameter of dust extraction nozzle: 145mm - Dimensions L/W/H: 1250x1300x1300mm - Weight: 908kg ADVANTAGES - Made in Italy - Very good condition - Used thickness planer Net price: 19900 PLN Net price: 4630 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Godsvwd U Ijpfx Acgeui

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Gusdpfx Acoy Egmuegji Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: new, functionality: fully functional, input voltage: 400 V, Application of a spiral shaft with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional knife shaft. A key advantage of carbide inserts is the ability to replace or rotate individual knives in the event of damage, significantly reducing operating costs. Carbide-tipped blades enable chip-free planing and optimal smoothness on any type of wood. Perfectly even thickness planing ensured by the centrally guided column table with central support. Processing accuracy of 0.1 mm, adjustable via a digital indicator on the handwheel. High working comfort due to the noise-reducing guard. Precision-ground thicknessing table for workpieces up to 230 mm in height. Standard equipment includes table extension with integrated rollers. Chain drive ensures precise feed of the workpiece. Numerous safety features: no-voltage release switch, limit switches to prevent unintentional activation, emergency stop switch. Technical specification Thickness planing width: 410 mm Material height clearance (min.): 5 mm Material height clearance (max.): 230 mm Table size (width): 930 mm Table size (depth): 410 mm Maximum chip removal in thicknesser: 5 mm Minimum planing length: 150 mm Cutterblock diameter: 95 mm Number of knives/inserts on cutterblock: 72 pcs Cutterblock speed: 4050 rpm Feed speed: 6 m/min Extraction port diameter: 100 mm Motor power: 4.2 kW Motor power S1 100%: 3.0 kW Voltage: 400 V Dimensions (width): 1110 mm Gedpfx Acjytc Sujgoui Dimensions (depth): 710 mm Dimensions (height): 1020 mm Weight approx.: 239 kg Scope of delivery Spiral cutter head with 72 TCT knives Spare TCT knives (5 pcs) Digital thickness table height indicator Table extension with rollers

Condition: excellent (used), functionality: fully functional, Combination planer/jointer, manufactured by Kölle, 630mm planing width, rubber infeed roller and rubber outfeed roller, motor brake, cutterhead with 2 strip-type planing knives, electric table height adjustment. Given its age, the machine is in very good condition and is ready for immediate use. Gjdpfx Ajzzfp Djcgeui

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 120 mm, number of blades: 96, actuation type: electric, Equipment: CE marking, - Year of manufacture: 2019. - Condition: very good. TECHNICAL SPECIFICATIONS: - Planing width: 630 mm - Planing height: 3-300 mm - Digital control of table height with display - Motor: 7.35 kW Guedpfx Acozim Rrsgsi - Maximum chip thickness: up to 8 mm - Minimum workpiece length: 250 mm - Diameter of planing shaft: 120 mm - Silent-Power spiral shaft, i.e., very quiet with four-sided knives - Self-aligning planing knives, i.e., no adjustment required after rotation - Additionally, 2 rollers in the table for processing wet or resinous wood - Smooth feed speed adjustment from 4-16 m/min - Power supply: 3 x 400 V - Diameter of dust extraction port: 160 mm - Weight: 845 kg - Dimensions (L / W / H): 125 x 115 x 114 cm

Condition: excellent (used), Catalog number 7739 TECHNICAL DATA PLANER: - cutterhead width 410mm - 3-knife cutterhead - noise-reducing comb - cutterhead guard - adjustable angle guide - table length 2060mm - both tables adjustable THICKNESS PLANER: - max. thickness of workpiece in thickness planer 240mm - thickness planer cutterhead guard *from top: - pawls - infeed roller, toothed, with twist - pressure rollers - planing roller - pressure roller - outfeed roller, smooth - 2 adjustable rollers in the lower table - main motor 5.5kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter 120mm - dimensions L/W/H 2060x970x1150mm - weight 660kg ADVANTAGES – Made in Italy – Noise-reducing comb – Unpainted – Excellent condition – Used planer-thicknesser Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR Gedpfx Acozx R Tcegoui (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 410 mm, tool diameter: 72 mm, number of blades: 3, actuation type: electric, rotational speed (max.): 6,000 rpm, total length of planing tables: 1,800 mm, overall weight: 355 kg, number of planer blades: 3, planer shaft diameter: 72 mm, - Year of manufacture: 2006 - Not repainted - Has undergone technical inspection - Operating manual, technical documentation TECHNICAL SPECIFICATIONS: - Planing width: 410 mm - Number of knives: 3 - Rotational speed: 6000 rpm - Diameter of the knife shaft: 72 mm PLANER: - Planning width: 410 mm - Maximum removal thickness: 4 mm - Length of planer tables: 1800 mm - Length of planer fence: 150 x 1100 mm THICKNESS PLANER: - Planning width: 404 mm - Length of thicknesser tables: 600 mm - Minimum/maximum planing height: 4/225 mm - Feed rate: 6 m/min - Motor power: 4 kW Godpfxow H R I So Acgeui - Voltage: 3×400 V - Diameter of dust extraction port: 100 mm Overall dimensions of the machine: - Length: 1950 mm - Width: 800 mm - Height: 1090 mm - Weight: 355 kg

Condition: new, Year of construction: 2025, Working width: 510 mm Planer shaft: Tersa Number of knives: 4 Surface table length: 2250 mm Surface fence, angle adjustable: yes, 45° to 90° Maximum planing height: 250 mm Height adjustment of thicknessing table: electric Thickness display: mechanical counter Feed speed: 8 / 16 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: segmented pressure beam Motor power: 7 kW Motor brake: yes, automatic Guedpfx Acjxrbhkegsi Extraction port: 150 mm Machine length: 2200 mm Machine width: 1050 mm Weight: 900 kg

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Gujdpjvwgc Usfx Acgoi