Used Heat Tunnel for sale (15,814)

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Blsdpfx Aez Arh Aefmsp Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: used, A used Hanagata Heat Shrink Tunnel - compact size Bledpfxjyz Uzxo Afmep

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm Bedpo Ahw H Eofx Afmjlp cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: like new (used), Ling Systems Bljdpfx Ajd I Ncbjfmsp Stainless heat shrink tunnel stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Bodpfxsz Hw D Uo Afmslp

Condition: used, Year of construction: 2021, type of input current: three-phase, input current: 120 A, input voltage: 400 V, We offer this used Chiossi & Cavazzuti Tetris 6M 1900 drying tunnel with a 6-meter heating section, manufactured in 2021. Power: 72 kW Phases: 3P+PE Current: 120 A Voltage: 400 V Frequency: 50/60 Hz Weight: 2500 kg Serial number: 2637 Product code: 1390081 Year of manufacture: 2021 Bljdeztplmopfx Afmsp If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Meurer heat shrink tunnel adjustable temp, variable speed, aperture 400mm x 350mm, mobile frame, Bedpfsdmn Umjx Afmjlp

Condition: excellent (used), Ulma HRX-400 heat tunnel. Blsdpfx Afjywi E Rjmep

Condition: used, Year of construction: 2017, machine/vehicle number: AT86, Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph Blodpovxz Axsfx Afmop Technical Specifications and Use of the heating tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph heats bottles using a hot water system, which makes it ideal for applications in the bottling industry. Moreover, this heating tunnel performs reliably and includes advanced technical features. It handles cylindrical bottles of various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The used heating tunnel employs a hot water heat exchanger, and users need to supply hot water through a gas boiler. Consequently, this setup heats the bottles uniformly and optimizes the workflow. Additionally, the recycling pump and dryer consume 53 kW of energy, which ensures energy efficiency while maintaining high performance. Furthermore, the used heating tunnel processes 12000 bottles per hour (bph), which makes it particularly suitable for high-speed bottling lines. Its FIFO (First In First Out) single-file system organizes bottles into a continuous and orderly flow. As a result, the system ensures consistent thermal treatment. In terms of compatibility, the machine handles cylindrical bottles with diameters ranging from 60 mm to 100 mm. Therefore, it provides versatility for different formats and types of containers. Additionally, the tunnel operates counterclockwise (right-to-left), which suits specific production layout requirements. Usage Conditions and Manufacturing Details The heating tunnel HTD12 operates in an “as-is” condition, so buyers must inspect the machine thoroughly before purchase. Notably, the manufacturer built this model in 2017, delivering a reliable and high-quality solution for integrating a heating tunnel into production lines. Omar R&G, a company renowned for producing high-quality machinery for the bottling industry, designed the HTD12 model to withstand intensive use. Consequently, it maintains operational reliability even in demanding environments. Technical and Functional Advantages The hot water heat exchanger delivers precise temperature control, which ensures uniform bottle heating. Moreover, the FIFO system keeps bottles in their entry order, which minimizes delays or errors during processing. In addition, the modular design and optimized layout simplify maintenance. Users can, therefore, integrate the tunnel quickly into existing lines. Furthermore, the system accommodates bottles of different diameters, providing versatility for diverse industrial applications. Conclusion of the Heating Tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph provides a high-performing, reliable, and versatile solution for bottle heating. Moreover, the machine processes 12,000 bph, organizes bottles efficiently using the FIFO system, and supports various formats. Consequently, it proves to be an excellent choice for high-productivity bottling lines. Thus, this HTD12 model by Omar R&G combines high performance with operational simplicity. As a result, it becomes a solid choice for industry professionals who seek reliability and efficiency. Therefore, for companies that prioritize productivity and precision, this machine represents a long-term investment.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Bedpfxoxl Tnpj Afmjlp

Condition: used, Year of construction: 1997, Continuous Heat shrink tunnel of BFB Packaging S. R. L. model M32N. Bledpfxsx Rz S No Afmep Adjustable manual damper Internal circulation fan Exit cooling fan 380 V / 50 Hz Control panel with digital temperature regulation, emergency stop, painted steel construction and mounted on four adjustable feet. Material used to apply heat shrinkable film to bundles, packages, packs.

Condition: used, KMA Heat Exchanger and Pumping Station Blodpfx Ajym Dx Asfmop

Year of construction: 1991, condition: excellent (used), Manufacturer: Beck Max. throughput: 650x300mm Max. temperature: 350 °C Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH) Bledpfx Afsmv E Icsmop

Year of construction: 1988, condition: excellent (used), Manufacturer: Beck Max. throughput: 660x180mm Max. temperature: ca 300 °C Blodpfx Ajmv Hy Hefmjp Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Year of construction: 2003, condition: used, machine/vehicle number: TUNNEL 40/27, Manufacturer: SFERE EMBALLAGE S.A. Year of manufacture: 2003 Electrical current: 10 A CE marking on manufacturer's plate Heat shrink wrapping Integrated through-feed conveyor Heating chamber with top cover Front control panel Integrated digital display Rotary adjustment control Control buttons on the front Emergency stop on the front panel Lateral switch-disconnector Mobile metal frame on casters Adjustable stabilizing feet Electrical hazard warning Used SFERE EMBALLAGE TUNNEL 40/27 heat shrink tunnel – Through-feed conveyor and digital control General description The used SFERE EMBALLAGE TUNNEL 40/27 heat shrink tunnel is a professional piece of equipment designed for heat shrink wrapping operations. Manufactured in 2003 by SFERE EMBALLAGE S.A., a French manufacturer, it allows products that have been previously wrapped in suitable film to undergo a heating phase as they pass through the tunnel. Designed to be integrated into a professional packaging environment, this heat shrink tunnel features a through-feed conveyor, a front control panel, and a mobile frame. Its manufacturer's identification and visible equipment allow for a clear understanding of its configuration without presuming its current performance. Bjdpfx Ajz Urq Hefmelp Why this model stands out The SFERE TUNNEL 40/27 combines product conveyance with a heat shrink operation. This configuration facilitates the organization of a packaging station where items, already wrapped in film, pass through the heating zone before subsequent handling or shipping steps. Its control panel with a digital display allows for the monitoring of an operating parameter. A rotary control and several control elements are also visible on the front. The frame mounted on casters, complemented by stabilizing feet, is a practical asset for positioning the machine in a workshop. Key advantages Through-feed conveyor to accompany the passage of products through the tunnel Heat shrink principle suitable for heat shrink wrapping operations Digital display integrated into the front control panel Rotary control accessible to the operator Emergency stop present on the control panel Lateral switch-disconnector visible on the machine Frame on casters facilitating movement Stabilizing feet to immobilize the equipment at the workstation Manufacturer's plate for identifying the model and its year of manufacture

Year of construction: 2017, condition: used, machine/vehicle number: AT108, Used COMTEC heating tunnel - year 2017Technical Specifications & Performance DataThis COMTEC bottle heating tunnel is engineered to stabilize bottle temperature immediately after filling by showering containers with warm water. By reducing thermal shock, it helps protect both product integrity and container quality across a wide range of beverage applications. Manufactured in 2017, this second hand unit offers reliable performance for industrial packaging and beverage production environments, and can be integrated within a used bottling line or operate as a standalone temperature-conditioning module.Manufacturer: COMTECYear: 2017Model: 4MQProcess function: Post-filling warm-water spray (rain/shower) bottle heatingPrimary purpose: Temperature stabilization to reduce thermal shock and prevent bottle damageContainer compatibility: Designed for PET and Glass bottlesApplication stage: Downstream of filler, upstream of labeling/packagingOperating mode: Inline continuous tunnel with warm-water recirculation and spray distributionAdvanced Automation & Control SystemsThe tunnel utilizes controlled warm-water distribution to ensure even coverage and consistent temperature conditioning. Standard industrial controls enable operators to manage process parameters, monitor spray performance, and coordinate with upstream and downstream equipment. Integrated safeguards and interlocks support stable operation within modern bottling equipment setups.Centralized operator controls for process managementConsistent spray pattern for uniform bottle surface wettingDesigned for integration with line PLC/HMI architecturesOperator protections with standard industrial safety interlocksProduction Line Integration CapabilitiesEngineered for seamless integration into existing production lines, the heating tunnel connects easily to conveyors and synchronizes with fillers, rinsers, labelers, and downstream packaging machinery. Its post-filling placement makes it suitable for a wide range of formats and production speeds in beverage production and industrial packaging environments.Inline or standalone operationCompatible with typical bottle conveyors and accumulation systemsSupports multi-format operations common to used bottling line upgradesMachine Condition & Maintenance HistoryThis 2017 COMTEC tunnel is presented as a second hand solution in working condition, ready for operation within a modern packaging line. Its warm-water shower process helps extend container handling reliability, providing a practical enhancement to quality and throughput.Operational status: Ready for operationCommercial use: Suitable for integration into a used bottling line or industrial packaging cellOperational Performance & VersatilityThe tunnel’s warm-water shower process supports beverage producers seeking to minimize thermal stress following cold or ambient filling. It is well-suited to a variety of bottle sizes and shapes typical of... Blodpfjzc Hqgox Afmjp

Condition: used, Year of construction: 2023, Overview Bsdpoz Sp Anjfx Afmolp Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania

Condition: excellent (used), Cryovac model ST98 electrically heated hot water shrink tunnel. variable speed conveyor. max product width 550mm. water temp 87 degrees c. Blodpfszp N Rbsx Afmop

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Bljdpfezrg T Esx Afmep Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Blodjz D Uguopfx Afmop Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer

Condition: used, Year of construction: 2025, Overview Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens S7-1200 with a 12" Siemens HMI touch screen showing the full process mimic with zone temperatures. Year of manufacture 2025, new. Technical details Blsdpfxez Eqdxo Afmsp - Year of manufacture: 2025, new - Capacity: 2,400 bottles/h at 500 ml, Ø 53 mm - Capacity: 1,800 bottles/h at 500 ml, Ø 70.3 mm - Capacity: 2,000 cans/h at 500 ml, Ø 66 mm - Container sizes: cans and bottles of 500 ml, 330 ml and 200 ml - Pasteurization temperature: +70 °C, 10 minutes residence time - Product temperature: +10 °C at the inlet, +37 °C at the outlet - Total production cycle: 41 minutes - Zones: 8 (3 x heating, 1 x pre-pasteurization, 1 x pasteurization, 3 x cooling) - Heating: steam, plate heat exchanger mounted on the side of the tunnel - Steam requirement: 143.6 °C at 3.6 bar, 130 kg/h in stable operation, 170 kg over the first 30 minutes at start-up - Water consumption: 0.2 to 0.3 m³/h in stable operation - Compressed air: 500 to 700 l/h at 6 bar - Total power consumption: 8 kW - Supply voltage: 400 V, 3 ph, 50 Hz; control voltage 24 V DC - Degree of protection: IP 54 - Overall dimensions: 6,500 x 2,200 x 2,200 mm (L x W x H) - Working area: 6.2 m², built from one module - Conveyor working height: 1,150 ± 50 mm - Material: AISI 304 stainless steel Equipment - U-shape tunnel, infeed and outfeed on the same end of the machine - Eight temperature zones with energy recovery between the zones - Plate heat exchanger for steam heating, mounted on the side of the tunnel - Siemens S7-1200 control system - Siemens 12" HMI touch screen with process mimic and zone temperatures - Electrical cabinet in AISI 304 stainless steel - Multi-row infeed and exit belt conveyors with Movex belt - Hinged inspection hoods over the treatment zones - Spray bars over the full tunnel length Condition and availability - New machine, year of manufacture 2025 - Available from 1 March 2027 - Location: Belgium

Condition: used, Year of construction: 2003, Overview This Krones Sander Hansen tunnel pasteurizer was built in 2003 for the pasteurization of beer in glass bottles. It is a double-deck machine with a nominal capacity of 40,000 bottles per hour on 0.5 l bottles. Its 12 treatment zones - 4 regenerative zone pairs and 4 pasteurizing zones - cover a treatment area of 241.6 m². At the design point it delivers 25.3 PU at 60 °C, with a total treatment time of 54.2 min (17.2 min heating, 19.9 min pasteurizing, 17.2 min cooling) from an inlet temperature of 12 °C to an outlet temperature of approx. 35 °C. Technical data - Manufacturer: Krones (Sander Hansen) - Year of manufacture: 2003 - Machine type: double-deck tunnel pasteurizer Bsdpfo Af Tkhox Afmjlp - Capacity: 40,000 bottles/hour (0.5 l glass bottles) - Treatment area: 241.6 m² - Decks: 2, main conveyors: 2 - Zones: 12 in total (4 regenerative zone pairs, 4 pasteurizing zones) - Max. spray temperature: 64.5 °C - Water content: 38.9 m³ in total (20.6 m³ in the zones, 18.3 m³ in the buffer tanks) - Steam: 2,270 kW design flow, approx. 1,100 kW in balanced operation - Main water: 77.8 m³/h design flow, approx. 1.0 m³/h in balanced operation - Compressed air: 5 m³/h - Electrical: 215 A rated current, 141.3 kVA, 113 kW, cos phi 0.80 - Overall length without operator platforms: approx. 24,752 mm - Width: approx. 5,580 mm (7,680 mm incl. pumps and operating area) - Pump side: right, seen from the infeed - Empty weight: approx. 74,000 kg (163,200 kg with product and water) - Largest section for transport: 12,000 x 1,100 x 2,250 mm - Transport: approx. 12 x 40 ft containers or trucks Equipment - Stainless steel housing with external circulation pumps and piping - Buffer tanks for regenerative water management - Local push-button control stations with emergency stops along the machine - Electrical cabinets and field terminal boxes - Operator platform with stairs Scope of supply The associated conveyor systems are not included. The scope of the conveyor system can be seen in the photos. Condition Used, still installed. The machine can be visited. Dismantling and loading can be carried out by the seller. Availability From 28 October 2026. Location: Poland.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, The Minipack Tunnel 50 Twin is designed for high packaging speeds with small products. Its dual heating chamber with separate controls ensures consistent shrink performance. Like all Minipack shrink tunnels, it is well insulated, energy efficient, and operates quietly. – Dual-chamber shrink tunnel – Independent control of heating chambers – High throughput and shrinking speed – Power supply: 400 V, 3-phase – Installed power: up to 15.0 kW – Maximum product dimensions: 400 × 190 mm (length variable) Bledpfjyank Ajx Afmjp – Tunnel inlet: 450 × 210 mm – Machine dimensions: 2,130 × 800 × 1,460 mm – Machine weight (net/gross): 260 / 318 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, Minipack Tunnel 50 Twin GT The Minipack Tunnel 50 Twin GT is a two-chamber shrink tunnel with interface, designed as an add-on for automatic packaging machines of the Pratika line. A key advantage is that tunnel settings can be stored in the packaging machine’s program alongside machine parameters for each product, meaning you no longer need to manually change these settings when switching products. – Separate control of heating chambers – Temperature and fan speed regulation – Power supply: 400 V, 50/60 Hz, 3-phase – Installed power: 14.5 kW – Max. product dimensions: 400 × 135 mm (with glass) / 400 × 200 mm (with curtain) – Tunnel infeed: 450 × 215 mm – Machine dimensions: 2,172 × 912 × 1,463 mm Bjdpfx Aeyanqcofmjlp – Machine weight (net/gross): 294 / 352 kg

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h Blsdpfxozwxu So Afmjp - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Availability Immediately. Location: Germany. Loading by the seller is possible.