Used Table Boring Machine for sale (66,358)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1110013, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle diameter: 110 mm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,500 mm Duodpfx Aceylwrtjxop Drilling spindle diameter: 110 mm Clamping surface of the table: 1,250 x 1,600 mm Table load capacity: 6,000 kg MACHINE DETAILS Control: Heidenhain TNC 426M Note: The tools shown in the images are not part of the sale or included in the scope of delivery.

Condition: excellent (used), drilling depth: 10,000 mm, MGA (Romanian) Deep Hole Boring Machine Max Boring Dia: 187mm Max Boring Length: 10,000mm Chuck Diameter: 813mm Chuck Bore: 152mm Machine had a complete retrofit in 2007 to enable CNC or manual mode operation Controls: Bosh Rexroth Electric Drives Software Winstudio Dedeyk Tcfjpfx Acxjup At the moment the machine is set to bore 3000mm length Has 5 other bed sections to increase this 12 Various Boring Tubes 30 Various Boring Heads 5 Supporting Steadies 2 Pressure Heads

Condition: used, Year of construction: 1996, functionality: unexamined, total length: 4,230 mm, total width: 1,885 mm, total height: 1,870 mm, workpiece weight (max.): 1,000 kg, overall weight: 2,500 kg, travel distance X-axis: 700 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 600 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, drill diameter: 32 mm, rotational speed (min.): 100 rpm, rotational speed (max.): 4,000 rpm, table length: 1,200 mm, table width: 600 mm, table load: 1,000 kg, The machine is equipped with: Dujdpfeytcyrex Acxjp Paper band filter Electronic handwheel Original documentation Weight / Dimensions: Weight: 2,500 kg Length: approx. 4,230 mm Width: approx. 1,885 mm Height: approx. 1,870 mm

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! Zonder freeskop kunt u klassieke verticale bewerkingen uitvoeren. Met de multihoekfrees (MA-25) kunt u veel verschillende vlakken bewerken. MA-25 2-assige freeskop - 30 kW - 2000 tpm - 1500 Nm koppel C-as bereik: 0-360° - 2,5° Bereik van de A-as: +/- 110° - 2,5° Koeling via spindel: 40 bar Totaal vermogen: 67 kW Geen foundation nodig! De Johnford DMC-serie brugfreesmachine met dubbele kolom en beweegbare tafel is vervaardigd uit een brug/kolomconstructie van gegoten Meehanite-ijzer, die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met C-frame. De brugfreesmachines zijn verkrijgbaar in uitvoeringen met beweegbare tafel en met schuifkolom (vaste tafel), met afmetingen variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De lange basisconstructie biedt volledige ondersteuning aan de tafel over de gehele Y-asbeweging van 130 cm, waardoor zeer zware werkstukken bewerkt kunnen worden. De Y- en Z-assen dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt. Dit maakt nauwkeurige bewerkingen en strakke toleranties mogelijk tijdens bewerkingen met hoge snelheid. Doordat er geen tafeloverhang is, worden de helling en de draaiing van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat de stijfheid verder verhoogt. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange levensduur van het gereedschap en een goede oppervlakteafwerking van het werkstuk. De combinatie van twee schroefbandtransporteurs en een rupsbandtransporteur garandeert een volledige spaanafvoer met minimale handmatige reiniging. Bovendien wordt eindige-elementenanalyse (FEA) gebruikt voor het ontwerp van elke brugfreesmachine, waarbij de effecten van realistische omstandigheden, zoals trillingen, warmte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm Dusdexp Sk Dspfx Acxep

Condition: ready for operation (used), controller manufacturer: Heidenhain, empty load weight: 18,500 kg, total length: 6,450 mm, total width: 3,700 mm, total height: 3,200 mm, CNC indexerende freeskop inclusief spaantransportband Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dsdpfjymg Sxex Acxeup Dimensions clamping space- table: 3360 x 1000 mm Power on spindle: 18 kW Type of millinghead: ISO 50 Max speedrange: 15 > 2000 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 320, empty load weight: 8,500 kg, total length: 5,000 mm, total width: 2,720 mm, total height: 2,420 mm, Correa A16 X: 1800 - Y: 800 - Z: 800 mm CNC Longitudinal travel X-axe: 1800 mm Cross travel Y-axe: 800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 2000 x 630 mm Power on spindle: 15 HP Dujdpfjyn Sq Njx Acxsp Admission in millinghead (ISO): ISO 50 Max speedrange: 25 > 3250 rpm

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions Dodpov Sfkasfx Acxjup

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,510 mm, table width: 350 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1510 x 350mm (60” x 14”) Longitudinal Travel: 700mm Cross Travel: 350mm Vertical Travel: 475mm Djdpfsygk Drsx Acxeup Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: used, Year of construction: 2005, Lot consists of: (1) 5-Axis Oil Hole Boring Machining Center Technical Details: Dusdpfoym Snxox Acxjp X/Y/Z 500/150/765 mm, B-axis rotary table with A-axis unit for part size 630 x dia 190 mm, spindle 8,000 rpm / HSK-63-A, 12-position automatic tool changer (ATC), CNC GE-FANUC 160i-MB, dimensions (LxWxH) approx. 2x4x3 m

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Duodpfeu R Sy Nex Acxsp Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: good (used), Year of construction: 1987, Control: Siemens 8-M X-axis travel: 10,500 mm Y-axis travel: 5,000 mm Z-axis travel: 1,250 mm W-axis travel: 1,250 mm Spindle diameter: 225 mm Spindle taper: SK 60 with adapter for SK 50 Spindle power: 100 kW Spindle speed: up to 750 rpm Spindle speed multiplier 1:4 = 3,000 rpm Spindle torque: 18,000 Nm Ram cross-section: 460 x 550 mm Dusdpfx Asyrb I Ejcxjp Feed rate: 4 m/min Rapid traverse X/Y: 5,800 mm/min Rapid traverse Z/W: 4,800 mm/min The machine is supplied without clamping plate and without table.

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Power consumption: 35 kW Dujdpoyqwxdofx Acxsp Year of manufacture: 2011 Weight: 26,000 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm Dujdpjym T Hvefx Acxsp distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools Dujdpfxjxcgtgs Acxsp - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic Duodpoxz Aygofx Acxjp * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: used, Year of construction: 1986, spindle diameter 1 mm x-travel 1 mm y-travel 1 mm Dedsylzv Aopfx Acxeup total power requirement 1 kW

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Further information: Dsdpfx Asyqmvxscxsup - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: used, Year of construction: 1999, plate width 2980 mm plate depth 3000 mm plate height 1400 mm Dodpfxegxqvzj Acxjup total power requirement 11 kW

Condition: used, Lot consists of: (1) universal milling machine Dusdpfxeylacbe Acxjp

Condition: used, table length 2000 mm table width 1800 mm table load 12,5 t Travel 1250 mm width of T-slots 28 mm T - slots distance 160 mm total power requirement 6 kW weight of the machine ca. 9,2 t dimensions of the machine ca. 3,7x2,1 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Duodpjyqvbkefx Acxjp than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter . mm x-travel . mm y-travel . mm table length 2000 mm table width 2000 mm table load 25 t Duedpfxoyqum Sj Acxop The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Boring power 70-550 mm bore depth 10000 mm table load 10 t turning speeds 35-92 + 92-595 U/min transmission ratio 2 clamping diameter max. 1000 mm workpiece weight 10000 kg total power requirement 37 kW Skyving and Roller Burnishing from ID = 100 to 420 Honing from ID = 100 to 600 Djdpfx Aceyqucyjxeup Axial Feed Boring : 0 – 400 mm/min Honing: 10 – 15.000 mm/min Lot of Accessories The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, core drilling diameter max. 50-600 mm bore depth 6000 mm table load 6 t turning speeds 50-600 U/min clamping diameter max. 650 mm Dujdpfoyqt D Aox Acxsp Boring (pushing) from ID = 50 to 320 Skyving and roller Burnishing from ID = 50 to 300 Honing from ID = 50 to 320 Extraction system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1971, Used long hole boring machine Brand: Rex LB MK/S Year of manufacture: 1971 Motor power: 1.7 kW Table size: 400 x 220 mm Drill chuck: 2-jaw chuck Dedpfoypbx Ssx Acxeup Motor speed: 2860 rpm Required space (LxWxH): approx. 900 x 700 x 1200 mm

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm Dujdpjwnbfkefx Acxsp -Total weight: 698 kg