Table Type Boring and Milling Machine

TOS WHN 13 CNC

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Laedpfew Iu Nhjx Apmod Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2000, x-travel 3500 mm y-travel 1600 mm z-travel 1200 mm Lasdpoykvaysfx Apmjd spindle turning speed range 250 - 3000 U/min tool taper ISO SK-50 tool change unit 40 rapid traverse: 15000 mm/min. feed 5000 mm/min table dimension - longitudinal 3860 mm table dimension - cross 1000 mm control HEIDENHAIN TNCi530 weight of the machine ca. 24 t dimensions of the machine ca. 8000 x 5000 x 4000 m

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Ljdpfxozc D E Is Apmsad Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Lodpoy T E Itsfx Apmjad Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, functionality: fully functional, Controller NCT104 (Made in Hungary) Table dimensions 1800 x 1800 mm X-axis travel 3500 mm Y-axis travel 1200 mm Z-axis travel 1500 mm W-axis travel 570 mm Spindle diameter 130 mm Table rotates via CNC program Spindle taper SK50 Weight 32 000 kgs Dimensions L x W x H = 6700 x 6000 x 4420 mm Laodpfxeyvuh Ij Apmjd

Condition: excellent (used), Year of construction: 2018, Heidenhain iTNC 640 CNC control Table dimensions: 1800 x 2200 mm Max. workpiece weight: 25,000 kg X-axis travel: 3,500 mm Laodpfxjw Hbnvj Apmsd Y-axis travel: 2,500 mm Z-axis travel: 1,600 mm Spindle/cone diameter: 130 mm Speed range: 3,000 RPM Spindle power: 46 kW Max. torque at 100% duty cycle: 1,000 Nm Machine weight: 38,000 kg Power-on hours: 16,631 Spindle hours: 4,430 Accessories: – Controlled B-axis – 40-position tool changer / chain-type magazine – Belt filter system with high-pressure pump – Chip conveyor – Heidenhain TS 460 workpiece probe – Automatic milling head type HUI 50 – Movable operator cabin Yp = 1,600 mm, Zp = 600 mm – Centralized lubrication system – Pfannenberg oil cooler – Documentation

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Laedey H Dahspfx Apmjd Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head – Froehling Froehling is a renowned brand known for its reliability and robustness in the rolling mill industry. 4-Hi rolling mill head with bending and tension control. The following are its features: Manufacturer: FROEHLING (Germany) – Refurbished in 2004 Material processed: Aluminum alloys – brass – copper – low-carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 – 2mm Coil dimensions: ID 400mm – OD 1500mm Ledpfxjg Ryqko Apmoad Maximum rolling speed: 400m/min Work rolls: Diameter 130mm – Face 340mm Back-up rolls: Diameter 390mm – Face 335mm Complete with: Uncoiler and coiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, disassembled and loaded onto a truck. Ready for any inspection by a prospective buyer. For any questions, please do not hesitate to contact us. IF YOU ARE INTERESTED, PLEASE SUBMIT YOUR OFFER; WE ARE SURE WE CAN REACH AN AGREEMENT.

Condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, feed length X-axis: 3,500 mm, feed length Z-axis: 1,250 mm, Spindle diameter: 130 mm X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,250 mm B-axis (table): 360º Lodpfxoy Hgvrj Apmoad W-axis travel (quill): 800 mm Table size: 2,200 x 1,800 mm Max. table load: 12,000 kg CNC: Heidenhain 424 M Spindle speed (2 ranges): 10 - 2,500 rpm Coolant tank: Yes Tool holder: BT 50 Weight: 42,000 kg Dimensions: 6,460 x 6,960 x 4,400

Condition: used, Year of construction: 2000, Year of manufacture: 2000 Control: Mazatrol 640 Documents included Chip conveyor TECHNICAL DATA – MAZAK INTEGREX 200SY Performance / Capacity Max. swing: Ø 540 mm Chuck size: 8" Max. machining diameter: Ø 540 mm Max. machining length: 1018 mm Max. outside diameter for bar material: Ø 51 mm Laedpfxeyh E Ire Apmod Main spindle Spindle nose: JIS A2-6" Spindle bore diameter: Ø 61 mm Spindle speed: 35 – 5000 rpm (Standard) / 35 – 4500 rpm (Option: 5000)* Motor power (30 min. rating): 22 kW (18.5 kW*) Max. torque: 350 Nm (35.7 kgf·m) Sub spindle (counter spindle) Spindle nose: JIS A2-6" Spindle bore diameter: Ø 44 mm Spindle speed: 35 – 5000 rpm Motor power (10 min. rating): 7.5 kW Max. torque: 57 Nm (5.8 kgf·m) Turret / Tool data Turret type: With ATC, spindle turret External turning tool size: □ 25 mm Internal turning tool size: Ø 40 mm Milling tool: Max. Ø120 × 250 mm length Indexing time (90°): 0.5 s Milling spindle speed: 15 – 6000 rpm (Option: 10000) Milling spindle motor power: 7.5 kW Max. milling spindle torque: 62.29 Nm (6.35 kgf·m) Feed axes X-axis: Travel 530 mm / Rapid traverse 30,000 mm/min Z-axis: Travel 1065 mm / Rapid traverse 33,000 mm/min Y-axis: Travel 140 mm / Rapid traverse 15,000 mm/min Z2-axis: Travel 1005 mm / Rapid traverse 20,000 mm/min Media / Control Coolant tank volume: 250 L Power consumption (continuous): 32.7 kVA Machine dimensions / Weight Overall length: 3485 mm Overall width: 2105 mm Overall height: 2416 mm Weight: 73,575 N (7,500 kgf)