Used Super Finishing Machine for sale (66,153)

Year of construction: 2015, condition: used, control Siemens Gijdjxq Hknepfx Ai Neu number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of delivery ifthis is noted in the additional information. Changes and errors in the technical data and information as well as Gisdpfx Aexqrg Iji Neu Subject to prior sale!

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg Gsdpfx Aiexfwflj Nsiu In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Engineering year: 1994 complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2000, Technical details: workpiece diameter: 26 mm swing diameter: - mm workpiece length: 66 mm total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm Giedpfx Aow Nxkfoi Nju *

Year of construction: 2004, condition: used, Control Siemens Sinumerik connected load 12 kVA In our opinion, the machine is in good used condition and can be viewed under power by appointment. Including Felsomat FZ250 Loading system Gsdpfx Aiexwdwlo Njiu Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 2013, condition: used, Technical details: Gsdpfx Ajixl Ahei Neiu swing diameter: 80 mm workpiece length: 450 mm weight of the machine ca.: 3500 kg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Gedpfel Dw D Esx Ai Njiu Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning Gijdpfx Aisxnm Rcj Neu - Electrical system checked - Immediately ready for use

Condition: used, The RGM 3, a top-tier Tube End Finishing Machine from KNUTH, is designed for precision and efficiency in tube processing. Its rigid construction and small footprint make it an ideal choice for any workshop looking to optimize space without sacrificing performance. The machine features a jaw chuck at the front and a clamping chuck at the rear, allowing for versatile operations. Additionally, it comes equipped with a tube cutter and an inside deburrer, ensuring clean and accurate finishes on all types of tubing. With the inclusion of a mobile base, the RGM 3 offers easy maneuverability, enhancing its usability. Whether you need to perform intricate tube work or handle larger projects, this highly robust machine is built for the task. Don't miss out on the opportunity to enhance your tube and profile processing capabilities; order online today to bring the RGM 3 to your workshop. Gedpsuxc Rhofx Ai Njiu

Condition: used, The PRS 76 is a top-tier Tube End Finishing Machine designed specifically for efficient tube and profile processing. This advanced machine features a powerful 3 kW motor that allows it to grind various materials effortlessly. With its innovative rotating design, the PRS 76 enables you to grind at any angle between 30° and 90°, accommodating diameters from Ø 20 mm to Ø 76 mm. It comes equipped with two K36 grinding belts, measuring 100 x 2000 mm, ensuring you have everything needed for optimal performance. Ideal for both tubes and profiles, the PRS 76 stands out for its ease of use and versatility. Enhance your workshop's capabilities with this robust machine. You can request a quote today to learn more about the PRS 76 and discover how it fits into your tube end finishing requirements. Gsdpfx Aijuxdb Us Nsiu

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Godpfxjp Atgbs Ai Njiu

Condition: new, The EM 250, a robust Tube End Finishing Machine from KNUTH, is designed to provide precise deburring of tubes, profiles, and flat materials, making it an essential addition to any cold circular saw, shear, or profile processing setup. This powerful machine allows for effective deburring both inside and outside the workpieces utilizing a sturdy wire brush, ensuring that chips and burrs are thoroughly removed while maintaining the integrity of the cutting edge. With a motor rating of 2.2 kW and a speed of 3,000 1/min, the EM 250 is ready to enhance productivity in any workshop engaged in tube processing. It features a rigid machine foot and is equipped with a vacuum exhaust connection for cleaner operation. Moreover, it comes with a 5-year warranty for the drive motor, underscoring its reliability. For a well-rounded solution in Tube End Finishing Machines, consider the EM 250. Request a quote today to learn more about this powerful tool in Tube and Profile Processing. Giedpfx Aju E H Tgoi Nou

Condition: used, Year of construction: 2017, working width max. 240 mm Sanding height max. 140 mm weight ca. 2200 kg Gijdpfx Aexwtwusi Neu

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Gisdpfx Aodzqn Dji Nsu Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: like new (used), Year of construction: 2019, Turbo-HKS Centrifugal Barrel Finishing System P100-B250/250-0-PP – New, Unused For sale is a Turbo-HKS centrifugal barrel finishing system in new, unused condition. The machine was manufactured in 2019 and was intended as a pilot system but was never integrated into production. Accordingly, it is in very good condition. Technical data: Manufacturer: Turbo-HKS GmbH, Germany Type: P100-B250/250-0-PP Year of manufacture: 2019 Machine number: 52063 / 15240 Operating voltage: 400 V Frequency: 50 Hz Current consumption: 17.96 A Barrel diameter: 350 mm Barrel height: 287 mm Barrel wall thickness: 12 mm Capacity: 250 liters Initial filling: 260 liters Gisdszb Ab Eepfx Ai Nou Maximum speed: 70 rpm Barrel material: EN AC-AlSi7Mg (T6 heat-treated) Application areas: • Deburring • Polishing • Smoothing • Edge rounding • Surface finishing • Processing of metal and precision parts Special features: • New condition • Unused system • German quality machine • Very robust industrial design • High processing performance • Ideal for series production and precision machining Inspection possible by appointment. Location: Göppingen, Germany

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm Gsdpfxofqpxio Ai Neiu - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: ready for operation (used), Vibratory finishing system KROMAS VN 200 ED incl. separation unit Giedpfoy U Ra Dsx Ai Nsu -Circular vibrator with 200-liter working container -Inner diameter of the working bowl: 980 mm -Motor power: 1.1 kW -Separation unit -Soundproof cover -Sliding stones -Machine feet -Control panel / ON / OFF / SEPARATION / TIMER / CONTINUOUSLY VARIABLE SPEED CONTROL Dimensions: L x W x H: 1.5 x 1.6 x 1.6 meters / Weight: 650 kg Errors and omissions excepted.

Condition: used, machine/vehicle number: 121-1-0-30, Separate control and switch cabinet system, nonwoven filter unit Gsdpfxoy Sqito Ai Nsiu

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total height: 1,250 mm, overall weight: 1,000 kg, total length: 1,870 mm, total width: 740 mm, type of input current: three-phase, tank capacity: 30 l, usable tank capacity: 20 l, input voltage: 400 V, power: 3.6 kW (4.89 HP), For sale is a Z4 centrifugal finishing system / vibratory finishing system for surface treatment of workpieces. The system is suitable for deburring, edge rounding, cleaning, smoothing, polishing, and burnishing of small to medium-sized workpieces. The centrifugal technology enables intensive processing with short cycle times. The machine is particularly suitable for series production, metal processing, stamped parts, turned parts, milled parts, and smaller precision components. The system is offered including a pneumatic unit and control cabinet. The Z4 features an integrated separation system for separating workpieces and grinding media, as well as a continuously variable speed adjustment of the rotating table via a frequency inverter. Technical data according to the manufacturer's data sheet Z4: Manufacturer: probably Spaleck Oberflächentechnik Model: Z4 Machine type: Centrifugal finishing system / vibratory finishing system Nominal volume of the working container: 30 l Usable volume of the working container: 20 l Operating voltage: 400 V / 50 Hz Connected power: 3.6 kW Max. speed of the rotating table: 280 rpm Ring gap width: ≥ 0.4 mm Tilting angle: 150° Space requirement: approx. 1.4 m² Width of the system: 740 mm Length of the system: 1,870 mm Height to the top edge of the system: 1,250 mm Length of the separation section: 855 mm Equipment: Centrifugal finishing system Z4 Integrated separation system Pneumatic unit Separation section / discharge Control cabinet Frequency inverter for stepless speed adjustment Working container with wear-resistant PU lining Suitable for wet machining / vibratory finishing processes Condition: Like new, used for only a few hours. Gisdpfey Uwh Ujx Ai Nou Terms of sale: Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with exclusion of any warranty/liability for defects. No guarantee is given. Errors and prior sale excepted. Inspection possible by appointment. Sale is ex works.

Condition: like new (used), Year of construction: 2022, operating hours: 1,186 h, functionality: fully functional, Screening of pre-crushed material. Density 0.5–0.7 t/m³. Nominal grain size 0–80 mm. Maximum grain size less than 300 mm. Power 11 kW. Approximate dimensions: 4337 x 2036 mm. Approximate weight: 3310 kg. Giodoy Smw Tjpfx Ai Nsu

Year of construction: 2017, condition: good (used), Finishing machine for digitally printed labels - Web width: 340 mm (max.) - Full-rotary speed: 120 m/min. (max.) - Repeat length: 152 - 457 mm (max.) Unwinder: - Electronic web guide control system - 3''/76 mm shaft with magnetic brake - Roll diameter Ø 700 mm (max.) Giedpfxjy Id T Do Ai Neu Rewinder: - 2 x 3''/76 mm shafts with magnetic brake - Roll diameter: 2 x Ø 600 mm (max.) - Automatic web tension control - 1 x 3''/76 mm shaft, matrix removal/waste UV Flexo Unit, full-rotary: - Servo-driven printing unit - Automatic register control - UV curing unit - 1 x anilox roller - 1 x plate cylinder Cold foil/laminating station: - 2 x 3"/76 mm shafts - Wet lamination / cold lamination - Laminate/delaminate Die-cutting unit, full/semi-rotary: - Die-cutting width: 330 mm (max.) - Die-cutting tolerance: +/- 0.15 mm - Magnetic cylinder: 22"/176 teeth - Automatic register control - Servo control Slitting unit: - Razor blade slitting - Shear knife slitting

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, RCC4 Range Gisdpfx Aiewfdbce Nou R 220 euro R 420 EC R 620 R 360 So DL R185 EC-KF RSKI 1000 RSKI700-3d-atex R 220 EC RT 250 euro AM: C1 M1 S1 S2 In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyor belts, and small machines) available in stock. The machines can be purchased or rented. Contact us for (free) advice on lapping, tumbling, and blasting technology.

Condition: used, Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBTS 651/4 Overall dimensions: 2260 x 1870 x 1450 mm Year: 2009 Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm Gsdsy Uc Tcepfx Ai Noiu D: 1340 mm Torus Ø: 430 mm

Condition: new, The tube linishing / satin finishing machine – ML100 – is the perfect choice for finishing the surface of round, oval and elliptical tubes. The ML planetary system enables the work without rotating the tube - delivering the best results on both bent and curved tubes. The auto feeding system transports straight tubes safety and automatically through the finishing station, enabling a consistent and high productive tube polishing quality. Minimum tube vibration even on the biggest lengths: With the ML Planetary System the tube is not spinning. The abrasive belts rotate around the tube while it is safely transported by the feeding systems. Straight or curved tubes polishing: ML100 was designed to finish either straight tubes (automatically) or bent tubes (manually). Quick set-up: Simple to work with ML100 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Oval tubes: Oval or elliptical tubes polishing or simply out-of-round tubes can be safety and consistently finished with ML100 Finishing after tube drilling: Maximum adaptability of the abrasive belt to holes or graps in the material surface. Technical Details - ML100: Working capacity (Ø mm) 10 - 114 No. Stations 1 Abrasive belt dimensions (mm) (2x) 50x940 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kw) 3 Wheel motor (kw) 1.5 Feeding motor (kw) (2x) 0.12 Gsded Hfnbspfx Ai Nsiu Total power (kw) 5 Consumption (A) 11 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Gedpoxmlinofx Ai Noiu