Used Sheet Fed Printing Machine for sale (68,321)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: SG47E1P001, working width: 3,200 mm, TECHNICAL DETAILS Printing/substrate width: max. 3.20 m Printing technology: HP Latex, water-based latex ink Printing inks: 6 colors (C, M, Y, K, Lc, Lm) MACHINE DETAILS Connected power: 11 kW Frequency: 50 / 60 Hz Voltage, 3-phase: 200–240 V / 380–415 V Current consumption, 3-phase: max. 48 A / 30 A Voltage, 1-phase: 240 V Current consumption, 1-phase: max. 63 A Energy consumption during operation: 11 kWh Energy consumption in standby mode: 0.2 Wh Operating altitude: max. 2,000 m EQUIPMENT Integrated curing/drying system Certifications: CE, CSA, EAC, KCC, FCC Part 15 Class A, VCCI-A Csdpfx Acjzyappe Tohb

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Codozx E Axjpfx Ac Tjhb Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Chodpjzx E N Sofx Ac Teb Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Cedpfxjzxgnvs Ac Tjhb Workpiece weight: max. 34 kg/m² Roller material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum printing speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Note: The machine heads need to be replaced. The seller can offer a complete service for this.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Chsdpozpvdzofx Ac Teb Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, TECHNICAL DETAILS Production Speed Production speed, UV spot coating: max. 3,123 ISO-B2 sheets/hour Production speed, Evo 75: max. 4,200 ISO-B2 sheets/hour Production speed, Evo 75: max. 2,291 ISO-B1 sheets/hour Production speed, hot foil embossing: max. 2,300 B2 sheets/hour Format and Printing Area Paper width: min. 290 mm Paper width: max. 750 mm Paper height: min. 360 mm Paper height: max. 1,200 mm Sheet format: min. 420 mm × 297 mm Sheet format: max. 750 mm × 1,200 mm Printable width: max. 540 mm or 730 mm Hot foil embossing area: max. 740 mm × 1,190 mm Resolution Resolution max.: 360 dpi Material Thicknesses and Basis Weights Material basis weight: min. 135 g/m² Material basis weight: max. 800 g/m² Material thickness before printing and lamination: min. 150 µm Material thickness before printing and lamination: max. 800 µm Material thickness for hot foil embossing: min. 150 µm Material thickness for hot foil embossing, standard version: max. 600 µm Material thickness for hot foil embossing, optional: max. 800 µm Cjdpfx Aozrfh Isc Tshb Foil Rolls Foil roll diameter: max. approx. 300 mm Foil roll length: 400–2,000 m Number of foil rolls that can be used simultaneously: max. 5 Foil roll width: min. 100 mm Standard core diameter: 1 inch MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,720 x 1,860 x 1,840 mm Weight: approx. 4,524 kg EQUIPMENT iFOIL-L module for hot foil finishing Evo-75 version for sheet formats up to 750 mm × 1,200 mm Holder for up to five foil rolls on one shaft Quick-change core for 1-inch foil rolls

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Euro Fintec 410 is a deburring machine which has a 1 inch belt. The belt assembly can be easily adjusted to accommodate complex deburring operations. It comes complete with a dust collection bag to ensure safe operation It is in excellent condition and comes complete with a number of deburring belts. Chsdpfx Aszmafqoc Teb

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute Chodpfx Acozmh Awe Tob - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: excellent (used), functionality: fully functional, overall weight: 154 kg, input voltage: 220 V, total width: 660 mm, total length: 1,500 mm, total height: 1,310 mm, HP DesignJet XL 3600 MFP - Total meter reading: 23,105 m2 - Includes Calibration Sheet - All-in-One model - Includes PostScript option Very high productivity thanks to fast first print and high print speed. 📐 Ideal for CAD, GIS, and architectural drawings, with sharp lines and accurate colors. 📄 Automatic roll feed with integrated catch tray for prints. 📱 Direct printing from USB, network, email, and mobile devices. 🖥️ 15-inch touchscreen for easy operation. 🔒 Comprehensive security, including encrypted storage and network security. 📦 Suitable for large print volumes, making it popular with repro departments and technical drawing offices. This machine has been inspected and thoroughly tested by our own specialized technical service. Chodpfezpyfiex Ac Teb If you would like any further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We are offering a very well-maintained DURST P5 250 WT digital printing machine, manufactured in 2022, for sale. Manufacturer: DURST Model: DURST P5 250 WT Year of manufacture: 2022 Condition: Very good Machine type: Industrial multi-pass digital printing machine Description: The DURST P5 250 WT represents a new generation of digital printing machines, equipped with Durst Water Technology. This system enables printing with low-odor or odorless water-based inks and is ideally suited for the production of packaging and displays made of corrugated cardboard. Durst WT inks do not contain any substances that are hazardous to health and meet the stringent requirements for occupational safety. The system is equipped with recirculating Durst Quadro Array print heads and WT inks. The additional ink recirculation behind the nozzle plate of the print head ensures high availability and reliability. Technical data: Material: A wide range of uncoated and coated corrugated cardboard qualities Sheet size: min. A3 (297 × 420 mm) to max. 2,500 × 3,200 mm Resolution: 1,000 dpi Maximum speed: 345 m²/h Average speed: 200 m²/h Average output at 2,440 × 1,220 mm: approx. 67 sheets/h Print heads: Durst Quadro Array Ink system: Durst Water Technology Printing inks: 6 colors Scope of delivery: DURST P5 250 WT digital printing machine Feeder Stacker Registration table Transport pallet Chsdjzwdibepfx Ac Teb Further information: Very little use No backlog of maintenance due to current service contract Transport pallet available For more information and technical details, please do not hesitate to contact us. If you have any questions or require further information, please send us a message or call us.

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts Chodpow H Naaefx Ac Tjb

Condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. Trumpf TruPrint 3000 G02, featuring Zirox sensor, single laser, and powder bed monitoring options. Trumpf TruPrint 3000, including filtration system Serial number: S0721Q0022 Laser runtime: 17,508 hours (laser beam on) Most recently used with AlSi10Mg aluminum alloy The 3D printer has already been dismantled by the manufacturer. Dismantling and functional test reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Accessories: 4x dosing containers 1x build cylinder 1x overflow container Various spare parts (e.g., protective glass) Manuals An Armanni CAR.Elev. pallet truck for container exchange is also in stock and available as an optional add-on. Faster production of high-quality 3D components Cedpfx Ajzpvumoc Tehb D1. Machine concept The TruPrint 3000 is a versatile medium-format machine featuring external part and powder management for the industrial production of complex metal components via 3D printing. Thanks to its large build volume, it offers great flexibility regarding the size, quantity, and geometry of parts for specific applications. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate cm³/h 5 – 60 Layer thickness μm 20 – 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 – 500 O₂ concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring – Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas – Nitrogen, argon Power supply V / A / Hz 400 – 32 – 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The specifications in our quotation and order confirmation are authoritative. Technical data TruPrint 3000 Tab. 3

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total width: 3,730 mm, compressed air connection: 6.9 bar, year of last overhaul: 2026, overall weight: 1,656 kg, FOR SALE – AUTOMATIC M&R SCREEN PRINTING MACHINE - Diamondback S 10/8 (plus extras) *2 flashes + compressor* £18,000 + VAT (ONO) Location: Mid Wales, UK Due to business closure, we’re offering our automatic screen printing press for sale. This is a fully operational, professionally maintained machine that is ready for removal and installation to a new premises. Equipment Included: 2018 M&R Diamondback S - 10 station / 8 colour Automatic Press • Under 400,000 impressions • Excellent working condition • Serviced annually • Full set of adult platens • Full set of junior platens • Full set of sleeve platens • Selection of squeegees and floodbars (10+ of each) • Includes 2 x Red Chili flash cure units 2014 ABAC Genesis 7.5 270 Air Compressor • Serviced annually • Fully operational Csdpfx Acozb N Tno Tohb Key Features: • Low impression count for an automatic press • Professionally maintained throughout • Annual servicing on press and compressor • Ideal for established print shops looking to increase capacity or businesses moving into automatic production • Available immediately due to business closure More photos and video demonstrations are available on request. We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment.The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use. Located in Mid Wales, UK. Price: £18,000 + VAT (ONO) Serious enquiries only please - more photos and videos can be provided. Viewing is welcome upon request. This is a bargain and a great addition to any new or established business. For sale as part of a complete setup with dryer in another listing

Condition: ready for operation (used), Year of construction: 2011, operating hours: 7,308 h, functionality: fully functional, machine/vehicle number: KJFE012284, number of ink cartridges: 11, color channels: 11, number of print heads: 1, resolution (max.): 28,801,440 dpi, paper weight (min.): 80 g/m², paper weight (max.): 500 g/m², paper width (min.): 200 mm, paper width (max.): 1,120 mm, paper height (min.): 127 mm, paper height (max.): 15,000 mm, number of feeding trays: 3, total length: 1,864 mm, total width: 667 mm, total height: 1,218 mm, space requirement length: 1,900 mm, space requirement width: 710 mm, space requirement height: 1,250 mm, counter reading (color): 3,422, year of last overhaul: 2026, type of input current: AC, input current: 1 A, input voltage: 240 V, Equipment: raster image processor, For sale is an Epson Stylus Pro 9900 SpectroProofer with an integrated X-Rite SpectroProofer powered by X-Rite. This is a 44" wide-format, fine art, and proofing printer from a professional photo studio, in well-maintained condition and ready for immediate use, with a current service report dated July 23, 2026. The unit is ideally suited for fine art printing, photographic printing, proofing, graphics and pre-press, advertising technology, CAD/GIS, as well as high-quality poster and art prints, also for museums, galleries and professional photographers. The model uses the proven Epson UltraChrome HDR-11 color pigment ink system and achieves a print resolution of up to 2880x1440 dpi. It handles media up to 44 inches (111.8 cm) wide and paper thicknesses up to 1.5 mm. The printer is ideal for photographers, print service providers, artists, advertising technology or fine art printing. A total of only 3,422 prints have been made. The printer is being sold due to the business owner's retirement. Technical data: - Manufacturer: Epson Chedpfxsznmilj Ac Tsb - Model: Stylus Pro 9900 + SpectroProofer (X-Rite) - Print width: 44" (111.8 cm) - Printing technology: Epson MicroPiezo TFP - Ink system: UltraChrome HDR (11 colors) - Maximum resolution: 2880x1440 dpi - Roll and single sheet feeder - LAN network connection (cables for connections available) - Weight: approx. 116 kg Scope of delivery: - Epson Stylus Pro 9900 + SpectroProofer (X-Rite) - Roll holder - Catch tray - Power cable - Available accessories (paper rolls of any quality, canvas rolls) - Partially used ink cartridges (depending on the fill level) - 11 ink cartridges (see photos) in original packaging, unopened Condition: The printer is in good condition and was operated only by professional staff in a canton-wide recognized photo store and regularly serviced, most recently in July 2026 (service record available). The operational condition can be inspected on-site at any time by appointment, and a function test can be performed. Location: Visp, SWITZERLAND Loading: Loading can be assisted upon agreement. Worldwide transport is possible, but must be organized by the buyer. Local pick-up is preferred. Private sale. No guarantee or return. Price: 3,250 Euros

Condition: repair required (used), Year of construction: 2018, functionality: not functional, machine/vehicle number: SG65Q11001, Everything is still quiet. Codpjy Siqiofx Ac Tshb

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand Canon POD Deck-E1 printing machine accessory. Item for sale: 1 x Canon POD Deck-E1 for the Canon imagePRESS V1350 Chjdpfx Aszxrnzsc Tjb Condition: This is a second-hand item, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2NT01193, total length: 1,800 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 220 V, product width (max.): 330 mm, Equipment: documentation/manual, double-sided, Canon imagePRESS'es C710, C650 and C910 – a reliable and high-performance digital production presses ideal for commercial print shops, in-house print rooms, and professional graphic environments. Features Outstanding image quality Handles a wide range of media types and weights Suitable for brochures, flyers, booklets, marketing materials, and short-run production Chodpfx Acsurbwxs Teb User-friendly touchscreen interface Condition Fully operational and well maintained, in excellent condition. The machines always serviced by Canon engineer with genuine parts, service history available if required Paper trays standard: 3 x sheet cassettes, Stack Bypass-C1: Multi-purpose tray/ for Long sheet) POD Deck Lite D: (A4/ A3/SRA3) Fiery Print Controller on board x 1 Prisma Sync x 2 Paper Size Length: 148 mm – 487.7 mm Width: 98.4 mm – 330.2 mm Up to 350gsm Duplex Colour Image Scanner with automatic document feeder Power Source 220-240 V Measurements Height 120. With touch control panel 145 Width 180 Depth 100 Machines always serviced by Canon. Discount offered if all 3 machines are bought. Available for inspection OPEN TO OFFERS

Condition: good (used), functionality: fully functional, For sale is a robust Bohm & Kruse continuous printing machine for printing on wood parts, especially wine crates, wooden boxes, and similar workpieces. The machine operates in a continuous process and is equipped with a printing roller. Letters and numbers can be used according to the desired lettering and used to print the workpieces. A large stock of letters and numbers is available. Chjdjzx U N Uspfx Ac Tob Technical data / Features Manufacturer: Bohm & Kruse Maschinenfabrik Machine type: Continuous printing machine / Wood printing machine Suitable for printing wine crates and wooden boxes Continuous printing roller Mechanical workpiece feed Letters and numbers can be used for individual labeling Many letters and numbers available for typesetting Adjustability for different workpieces Heavy-duty industrial design Robust mechanical construction Used condition as shown in the photos Ideal for the production and individual labeling of wine crates, packaging crates, and other wood products. Transport possible for an additional charge! The machine is currently still at the customer's site. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, control type: CNC control, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser hours: 30 h, laser power: 6,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,015 mm, travel distance Y-axis: 1,515 mm, travel distance Z-axis: 50 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, 🇳🇱 Verkooptekst voor uw BEKE 6 kW Fiber Lasersnijmachine (3000 × 1500, Reci‑kop) Bent u op zoek naar een krachtige, nauwkeurige en betaalbare lasersnijmachine voor metaalbewerking? Deze BEKE 6 kW fiber lasersnijmachine, uitgerust met een Reci‑laserkop en een efficiënt werkbereik van 3000 × 1500 mm, biedt uitstekende prestaties voor zowel dunne als dikke metalen platen. Echt 6000 watt vermogen voor het snijden van staal, RVS, aluminium, koper en messing Reci‑laserkop voor stabiele prestaties, hoge snijkwaliteit en lage onderhoudskosten Compact werkbereik van 3000 × 1500 mm, ideaal voor standaard platen en efficiënte productie Strakke snijranden zonder nabewerking Hoge productiesnelheid, perfect voor seriewerk en industriële toepassingen Betrouwbare onderdelen: Reci‑kop, Fuji servo’s, HIWIN geleiders Gebruiksvriendelijke CNC‑besturing met hoge nauwkeurigheid Lage energieconsumptie vergeleken met CO₂‑lasers ⚙️ Technische specificaties Werkbereik: 3000 × 1500 mm Vermogen: 6000 W fiber laser Positioneringsnauwkeurigheid: ±0,03 mm Chodpfx Acszyv Sye Tjb Herhaalnauwkeurigheid: ±0,02 mm Snijsnelheid: tot 40 m/min Snijdikte: tot 20 mm, afhankelijk van materiaal Koelsysteem: industrieel waterkoelsysteem

Condition: new, Year of construction: 2025, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 196130, resolution (max.): 2,400 dpi, paper weight (min.): 52 g/m², paper weight (max.): 350 g/m², Equipment: auto duplex, For sale: Fujifilm Apeos Pro C650 We are offering a new and fully functional Fujifilm Apeos Pro C650. Included with the machine: Fujifilm Apeos Pro C650 Finisher with 2/4-hole puncher PostScript 3 kit Transport unit Power cable Key specifications: Print speed: up to 65 pages per minute Resolution: exceptionally sharp 2,400 × 2,400 dpi thanks to Fujifilm’s LED printhead technology Paper weight: supports a wide range of media from 52 to 350 gsm Paper capacity: up to 7,360 sheets Cjdjzxy H Ejpfx Ac Tshb Serial number Apeos Pro C650: 196130 The machine can be picked up at our location in the Netherlands. Please feel free to contact us for more information or to place a bid.

Condition: repair required (used), functionality: not functional, We are offering this 3X HP Latex 365 digital printing machine, year of manufacture unknown, which requires repair. 3 machines, sold as a package. Not immediately operational. Various faults. Perfect for dismantling or as a trade-in. Manufacturer: HP Model: Latex 365 Condition: requires repair Category ID: 177 Chedpfx Acszv Skkj Teb Type ID: 976 Type: Digital printing machine If you have any questions or require further information, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Chodpfx Aswz Ukyoc Tsb Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand black-and-white production system, the “HP Latex 800W” Item for sale: 1 x HP Latex 800W We are happy to configure the machine to your requirements. Please feel free to contact us! Chodpfx Acszxqgcs Tob Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Cedozt Dmrepfx Ac Tjhb Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 17271 - 17272, number of ink cartridges: 10, color channels: 10, number of print heads: 40, resolution (max.): 1,200 dpi, paper weight (min.): 28 g/m², paper weight (max.): 300 g/m², paper width (min.): 200 mm, paper width (max.): 540 mm, paper height (min.): 200 mm, paper height (max.): 100 mm, number of feeding trays: 1, total length: 12,000 mm, total width: 3,300 mm, total height: 2,400 mm, space requirement length: 18,000 mm, space requirement width: 5,000 mm, space requirement height: 3,500 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 150 A, input voltage: 400 V, Equipment: auto duplex, documentation/manual, raster image processor, Canon ProStream 1000 – High-Speed Full-Color Inkjet Web Press Canon ProStream 1000 digital inkjet web press in excellent working condition. The press has been in regular production until recently and is fully operational. It has been professionally maintained and can be inspected while running by appointment. Equipped with Canon ColorGrip technology, the press delivers outstanding print quality on both coated and uncoated offset papers, providing exceptional color consistency and productivity. Chedpszrmwdsfx Ac Tsb Key Features Canon ProStream 1000 continuous-feed inkjet press Up to 80 m/min printing speed CMYK full-color duplex printing Canon ColorGrip system included Prints on coated and uncoated offset papers Excellent mechanical and cosmetic condition Well maintained throughout its service life Available for inspection Dismantling and loading assistance can be arranged upon request This is an excellent opportunity to acquire a high-performance production inkjet press with proven reliability and industrial productivity at a fraction of the cost of a new machine. Please contact us for further technical information, photographs, maintenance records, or to arrange an inspection.