Used Straight Edge for sale (6,800)

Condition: good (used), Year of construction: 1991, Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges -Cutting knife -Edge plate Nwsdpfob A Ninjx Aa Eor -Transport dimensions: 900/700/H1080 mm -Weight: 135 kg

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard configuration Nwsdpev N I Hlofx Aa Esr - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Njdpfsxy Tm Iex Aa Eswr

Condition: used, Year of construction: 2016, total length: 4,630 mm, total height: 1,770 mm, total width: 1,600 mm, Weight: 1.200 kg Price: On request - Machine available from: 2025-12-01 - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 15507737 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Type/Brand: FG 201 - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: 1903 - └ 3rd unit type: Pressure rollers - - Type/Brand: 1812 - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: 1918 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: FR201 - - Tools available: Yes Nwjdpsx Dihpjfx Aa Esr - └ 6th unit type: Corner rounding unit - - Type/Brand: 1832 - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Type/Brand: 1964 - - Tools available: Yes - Min. edge band thickness [mm]: 3 - Max. edge band thickness [mm]: 6 - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 45 - Min. panel width [mm]: 65 - Max. panel width [mm]: 65 - Min. panel length [mm]: 160 - Max. panel length [mm]: 250 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 10 - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 29.37 - Fuse [A]: 35 - Transport dimensions: 4630mm x 1600mm x 1774mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 98 h, machine/vehicle number: 17000-23051522412, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser source manufacturer: Epilog, laser hours: 97 h, laser power: 60 W, table length: 1,003 mm, table height: 673 mm, working length: 610 mm, working width: 305 mm, workpiece weight (max.): 63 kg, type of cooling: air, overall weight: 63 kg, total length: 1,003 mm, total width: 673 mm, total height: 455 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser engraver in excellent condition, supplied with a professional extraction unit and professional compressor. The system is totally complete and fully functional, virtually like-new (97 hours of operation). Business closed due to bereavement. Dimensions & Capabilities Working area (X × Y × Z): 610 × 305 mm Machine dimensions (L × W × H): approx. 1003 × 673 × 455 mm (39.5 × 26.5 × 17.9 in) Weight: approx. 63 kg (138 lbs) Laser Options Available type: CO₂ (metal/ceramic tube, air-cooled, 10.6 µm) with 60 W of power Speed & Precision Max. speed: 120 IPS (≈3.05 m/s) with 5 G acceleration Resolution: adjustable from 75 to 1,200 dpi Software & Memory Software interface: Laser Dashboard™ and Epilog Job Manager™ Internal memory: up to 1 GB, allows for jobs of any file size Control Features & Mechanical Construction Operation modes: raster, vector, or optimized combined mode Motors: DC brushless servo motors with rotary encoders for precise positioning Guide structure: * X-axis: polished stainless steel bearings with Teflon coating * Belts: double-width Kevlar type B for high accuracy Nwjdew Hg Nfepfx Aa Eor Camera & Display IRIS™ system: integrated overhead camera for visual job placement directly onto the laser table 7″ LED touchscreen on the machine for job selection and direct autofocus Connectivity & Power Supply Connections: USB, Ethernet and optional wireless (Wi-Fi), compatible with Windows 7/8/10/11 Electrical supply: auto-switching 100–240 V, single-phase 50/60 Hz; max amperage ≈13 A (or ≈6.5 A depending on region) Ventilation & Safety Extraction requirements: external venting or internal filtration unit, airflow of 350–400 CFM (≈595–680 m³/h), single 4″ (102 mm) exhaust *Safety standard: Class 2 laser product (≤1 mW, 600–700 nm)

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2022 Features and technical data: - Continuously inclinable sanding unit (0 - 90°) for vertical and horizontal sanding - Oscillating sanding belt for improved sanding results and increased belt service life - Fast and easy sanding belt change via quick-release system - Standard sanding pad with graphite coating for increased belt service life - Height-adjustable, robust worktable made of cast iron with T-slot, supported by spring suspension - Smooth height adjustment of the table by means of gas pressure springs - Including lateral sanding sleeve device for sanding curves and radii - Including continuously adjustable mitre fence - Two extraction ports Ø 100 mm - Sanding sleeve device including three rubber rollers (Ø 38/50/76 mm), three sanding sleeves (sanding width: 100 mm), four insert rings and height-adjustable table with extraction device - Table insert with slots for optimum dust extraction - Continuously tiltable sanding unit from 0 - 90° - Indexing at 0°/22.5°/45°/67.5°/90° - With rubberised sanding roller and graphite coating on the sanding pad - Standard with second emergency stop switch on top of the sanding unit - The continuously inclinable sanding unit enables a wide range of sanding applications, e.g. vertical and horizontal sanding - Sanding belt length: 2,270 mm Njdjx Hbrzopfx Aa Eowr - Sanding belt width: 150 mm - Belt speed: 16 m/s - Sanding area length: 770 mm - Sanding area width: 150 mm - Longitudinal table length: 680 mm - Longitudinal table width: 310 mm - Longitudinal table height adjustment: 130 mm - Cross table height min.: 920 mm - Extraction port diameter: 100 / 100 mm - Supply voltage: 400 V - Phases: 3 Ph - Mains frequency: 50 Hz - Power requirement: 2.1 kW - Fuse protection: 10 A Dimensions: 1,350 x 585 x 1,210 mm Weight: approx. 162 kg Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Gear ratio: 1:2.5 -Voltage: 220/380 volts Nedpfob A Hacsx Aa Eewr -Receiving shaft: Ø 30 mm -Tool: Ø 180 x 12-20 mm -Dimensions: 570/340/H195 mm -Weight: 56 kg

Year of construction: 1984, condition: ready for operation (used), travel distance X-axis: 15,900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 790 mm, overall weight: 23,000 kg, number of axes: 3, General Data Machine weight 23000 kg Main Drive Number of axis 3 Nodpfx Aajx I S Rqs Eswr Movement X-Axis Movement 15900 mm Z-Axis Movement 790 mm Y-Axis Movement 500 mm This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Nwedoxfh Tmepfx Aa Esr Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: used, Year of construction: 2009, operating hours: 2,216 h, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Nwjdpfx Aox Aq Dpea Esr These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-01-19 - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 26 - Operating hours: 2216 - Number of units [pcs]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2018, 0,4 - 6 mm Workingpiece thickness from to 8-60 mm Total length 3960 mm Feed speed 10 m/min. Nsdpfex I Sgrox Aa Ejwr Weight 1055 kg

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 The upper section is of heavy cast construction with an integrated three-phase motor, 380 V, 2.2 kW, 2850 rpm. The machine is equipped with a built-in switch-plug combination; motor protection switch and main switch in accordance with VDE regulations. Dimensions of the sanding belt backing: 850 x 150 mm. The steel table height is adjustable via spring pressure. Belt size: 150 x 2280 mm. The sanding belt backing is coated with a graphite glide pad. The machine is delivered with an assortment of sanding belts. Additionally, the scope of delivery includes a mitre and angle guide. When connected to a central extraction system and with a minimum air speed of 20 m/s, the machine is dust-tested (GS) by Holz-BG-Stuttgart. Standard features: - Swivel range 90–180° - Motorized belt oscillation - Small support table at the deflection roller - Pneumatic belt tensioning Nedpfx Aow I Uqxea Eewr Technical data: Motor power: 2.2 kW Belt size: 150 x 2280 mm Belt speed: 22 m/sec Table size: 750 x 350 mm Space requirement: 1000 x 800 mm Weight: from 180 kg Extraction connection diameter: 100 & 80 mm Availability: short-term Location: Flörsheim

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available Nedpeb A Nm Hjfx Aa Eewr -Price: per piece -Weight: 4 kg/piece

Condition: used, Year of construction: 1974, Pressure total: 600 ton Ram stroke: 762 mm Nwsdpfoxq Tntex Aa Esr Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 350 mm Table surface area : 3645 x 2140 mm Slide area: 3645 x 2140 mm Die cushion capacity in table: 120 ton Die cushion stroke: 305 mm Die cushion pad area: 2805 x 1260 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Table height over floor: 650 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton Standard configuration Extended machine accessories

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Nwodpfx Aajxq Apge Eer

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece Nsdpob A Nm Eefx Aa Eowr

Condition: used, Year of construction: 1986, Pressure total: 500 ton Nwsdpouqdqlsfx Aa Eor Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton Standard configuration The press was completely overhauled mechanically, hydraulically and electrically in 2008.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available Njdpfjb A Nm Nsx Aa Ejwr -Price: per piece -Weight: 3 kg

Condition: used, Year of construction: 2005, Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton Standard configuration Njdpswnn Rtefx Aa Ejwr 2 cushion cylinder 2 pads

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 Nsdsx Ehf Nopfx Aa Eswr -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Nsdpeuqdi Ujfx Aa Eewr Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: good (used), Year of construction: 1995, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm Nwedjcg Al Sspfx Aa Ejr -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Condition: used, Year of construction: 1996, machine/vehicle number: 14.194, Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Nwedpfou Saaaox Aa Eor Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos Nwsdpfx Aajx Ea Ayj Ejr -Box dimensions: 460/355/H355 mm -Total weight: 33.2 kg

Condition: good (used), Welding edge former, welding edge former, weld seam preparation, welding edge forming machine, edge milling device, edge milling machine, mobile milling machine -Bevel length: max. 20 mm Nwjdpfx Ajd Izt Sja Ejr -Dimensions box: 460/360/H355 mm -Weight: 24 kg