Used Steady Rest for sale (1,602)

Condition: used, Bezel moving, moving bezel, steady rest, lynette -Max. Passage: Ø 175 mm -Condition: Gunmetal -Center height: 310 mm -Drawings with the photos -Number: 1 piece available -Dimensions: 590/70/H540 mm Dcjdpfodkzu Uex Aa Hel -Weight: 36kg

Condition: used, Bezel, stick, lynette -Bottom parts: different sizes -Price: on request Dodpfxedl U Nfs Aa Hocl -Number: 4x bezel lower parts available -Price: per piece -Dimensions: -Weight: kg

Condition: good (used), Bezel, steady rest, lynette -max. passage: Ø 250 mm -Centre height: 220 mm -Edition: Cast -Dimensions: 462/150/H505 mm Djdpfodpaq Rjx Aa Hecl -Weight: 39 kg

Condition: good (used), Moving bezel, tracking bezel, setting stick, lynette -Max. passage: Ø 80 mm -Edition: Gray cast iron -Hole spacing: 340 mm Dcedsb A Nlyspfx Aa Hol -Peak height: 150 mm -Dimensions: 390/70/H320 mm -Weight: 12 kg

Condition: good (used), Moving bezel, tracking bezel, setting stick, lynette Dcsdpfxjb A Nvhj Aa Hel -max: Passage: Ø 140 mm -Edition: Red brass -Hole spacing: 335 mm -Peak height: 215 mm -Drawing with the photos -Dimensions: 450/100/H540 mm -Weight: 26 kg

Condition: good (used), Bezel, setting stick, lynette Dcsdpfx Ajb A Rfpsa Hel -Max. passage: Ø 70 mm -Peak height: 200 mm -Drawing with the photos -Weight: 8 kg

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY - Supply voltage : 400 [V] - Power : 8 [kVA] Dcjdpfxoyn R I Ho Aa Hjl WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] MACHINE HOURS - Number of hours under power : 01 [h] EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 three-key steady rest

Condition: good (used), Bezel, moving bezel, steady rest, lynette -Bezel: moving -Tip height: see photos for dimensions -Dimensions: 220/195/H340 mm Dcedpjwtmixjfx Aa Hol -Weight: 8 kg

Condition: good (used), Bezel, moving bezel, steady rest, lynette Dcjdjwuqqijpfx Aa Hsl -Bezel: max. aperture Ø 145 mm -Centre height: 190 mm -technical drawing: in the photos -Dimensions total: 310/115/H340 mm -Weight: 21.6 kg

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1 790 58 450, turning length: 990 mm, turning diameter: 160 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1,500 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 2,400 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 100 m/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,500 rpm, total height: 2,950 mm, total length: 5,550 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 2,400 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 100 m/min, type of input current: three-phase, torque: 191 Nm, overall weight: 16,000 kg, chuck outer diameter: 215 mm, spindle nose: A6, mount diameter: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General features: Machine type: Horizontal shaft turning center with pick-up loading Area of application: Complete machining of shafts and rotationally symmetrical components Loading: Pick-up automation Processing types: Green turning, hard turning, roughing, finishing Tool carrier: 12-way turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, measuring probe Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% ED): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travel paths & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Travel paths X/Z axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. travel speed X/Z: 30 m/min / 100 m/min Tailstock: Pressure force: 850 daN Centering center holder: MK4 Max. speed: 4,500 rpm Dimensions & weight: Dedevxf U Ejpfx Aa Hecl Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Dcsdpfxexc In Ss Aa Hol Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: good (used), Bezel, steady rest, lynette -Bezel: max. opening Ø 128 mm -Centre height: 200 mm -technical drawing: in the photos Dcodpfx Ajtz Ht Rsa Hsl -Total dimensions: 650/80/H420 mm -Weight: 28 kg

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket Dcodpfeuqf Nvjx Aa Hol -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm -Weight: 4.1 kg / 3.9 kg

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 106 mm Dcodpfx Asuqf Thja Hol -Dimensions: see photo technical drawing -Dimensions: 125/95/H90 mm -Weight: 1.8 kg

Condition: good (used), Pipe cutting machine, pipe cutting saw, pipe cutter Dsdpfx Aaev Tz N Ij Hjcl -Pipe size: 22-108 mm pipes of the pressfitting systems made of stainless steel, carbon steel, copper -Equipment: Foot switch, steel rollers, stainless steel rollers, cutting wheel, steady rest, workbench, vice -Operating voltage: 220 volts -Dimensions: 1200/870/H1170 mm Transport dimensions: 1200/870/H460 mm -Weight: 61 kg

Condition: good (used), Bezel, steady rest, lynette -Steady: for crankshaft grinding machine -Dimensions: see photos -Dimensions: 420/110/H270 mm -Weight: 20.8 kg Dcjdpfxov Rmt Ts Aa Hol

Condition: good (used), Bezel, moving bezel, steady rest, lynette -Bezel: moving -Tip height: see photos for dimensions -Plating: Brass -Dimensions: 170/80/H275 mm Djdpfx Aowcdvzsa Hocl -Weight: 2.9 kg

Condition: as good as new (ex-display), Year of construction: 2025, Max. over bed diameter: 330 mm Max. swing diameter without bed bridge: 476 mm Max. swing diameter over cross slide: 198 mm Center height: 165 mm Turning length: 500 mm Spindle end: D1-4/DIN55029 Spindle bore: D38 mm Can be cut threads: Metric, Whitworth, Module Spindle speed: 70 – 2000 rpm Tailstock taper: Morse 3 Motor power: 1.1/1.5 kW Dcsdpfjxb Axcox Aa Hsl Machine weight: 500 kg Machine dimensions: 1320 x 610 x 1400 mm Accessories, Equipment - 3-jaw D160 mm chuck - 4-jaw D200 mm chuck - 4-station tool post - Electromechanical spindle brake - Follow and stationary steady rest - Coolant system - Halogen work light - Feed guard - Splash guard - Manuals The machine is in brand new condition. Operating hours are 0. Showroom machine.

Condition: good (used), Bezel, setting stick, lynette -Bench: for crankshaft grinding machine -Peak height: 170 mm -Dimensions: see photos -Dimensions: 205/115/H220 mm -Weight: 11.1 kg Dedpfewv Na Sex Aa Hjcl

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest - Traveling steady rest - 3-jaw chuck mounted, D200 mm - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray - Tool holder guard Dedox Rt Euspfx Aa Hocl - Longitudinal travel stop - Halogen work light - Emergency stop button - CE marking - Machine documentation The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 8073, Offer 25432 Technical specifications: - Swing diameter: 320 mm - Distance between centers: 750 mm - Maximum turning diameter over bed: 550 mm - Maximum turning diameter over cross slide: 175 mm - Spindle bore: 32 mm - Spindle mount: - Tailstock quill taper: MT 3 - Quill stroke: 180 mm - 18 spindle speeds: 85 - 2000 rpm - Longitudinal and cross feeds - Metric thread pitches - Imperial thread pitches - Module threads Dcjdpexx Sp Eofx Aa Hel - Diametral pitch threads - Quick-change tool post - Chuck - Steady rest - Drive: 400 V / 2.2 kW - Required space (approx.): W 2100 x D 750 x H 1300 mm - Weight (approx.): 750 kg

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Dcodpfx Aaou T Dryo Hel Speed 5-900rpm X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest The offer is aimed exclusively at traders within the meaning of §14 BGB

Condition: used, Year of construction: 1993, CNC Lathe Monforts RNC 4 with KNCS 260 chuck Collet up to Ø 60 mm Bar feeder up to Ø 65 mm Year of manufacture: 1988 Lots of accessories CNC Lathe Monforts RNC 4 with 15-series control and C-axis, KNCS 260 chuck, year 1995, lots of accessories RNC 5 Chucking-only lathe Year of manufacture: 1992 Includes many jaws Monforts RNC 7 with automatic tailstock, 1500 mm Z-axis travel Driven tools with spindle indexing every 2.5° Dcedpfxjyq R T Ie Aa Hol Chuck 500 mm, many tools and jaws included Year of manufacture: 1993 Very good condition The last CNC lathe, an RNC 7-1000 with automatic tailstock, steady rest, C-axis Lots of tools and jaws Ideally, everything would be sold as a package — 5 Monforts lathes with a very large amount of accessories.

Condition: good (used), Bezel, setting stick, lynette Dcjdey Ux T Sepfx Aa Hjl -Max. passage: Ø 320 mm -Peak height: 315 mm -Technical drawing: see photos -Dimensions: 100/420/H600 mm -Weight: 33.7 kg

Condition: good (used), Steady rest COLCHESTER Magnum Dcsdpjzcnw Iefx Aa Hjl Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!