Used Safe for sale (2,162)

Condition: used, machine/vehicle number: 516223V00900, Year of construction: 2019, operating hours: 4,777 h, load capacity: 1,800 kg, lifting height: 4,500 mm, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 4,500 mm MACHINE DETAILS Mast design: Triplex mast with full free lift Gujdpfx Ao Ahrcajcgsi Drive type: Electric Battery year of manufacture: 2019 Battery voltage: 48 V Battery capacity: 625 Ah Measured idle voltage: 50.83 V Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,150 x 2,060 mm Own weight: 3,400 kg Service valid until: 10/2027 UVV inspection valid until: 10/2027 Operating hours: 4,777 h EQUIPMENT Former Still full-service unit Battery charger Fork positioner with side shift Side fall protection LED work light at the rear Orange warning light Comfort seat with lumbar support Seat heating Hydraulic valves: 3rd and 4th valve Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not done on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 219

Condition: used, Year of construction: 2018, operating hours: 4,123 h, load capacity: 1,600 kg, lifting height: 4,660 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,660 mm Rated load capacity: 1,600 kg Fork length: 1,150 mm Guodpfx Aj Ahrdfscgsi MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 4 PzS, 560 Ah Battery voltage in idle state: 49.9 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,260 x 2,135 mm Own weight: 3,000 kg Service valid until: 02/2027 UVV (occupational safety) valid until: 02/2027 Operating hours: 4,123 h EQUIPMENT Triplex mast with full free lift Side shifter Safety light at the rear Comfort seat Formerly a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tonnes is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tonnes and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 287

Condition: used, machine/vehicle number: H2X386H11951, Year of construction: 2017, operating hours: 13,483 h, load capacity: 1,600 kg, lifting height: 5,255 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 5,255 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery voltage: 48 V Battery capacity: 500 Ah Battery manufacturer: Hawker Gsdpj Ahq T Djfx Acgsui Battery date: 05/26/2026 Battery resting voltage: 50.1 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,321 mm Own weight: 3,400 kg Service valid until: 06/2027 UVV (occupational safety) valid until: 05/2027 Operating hours: 13,483 h EQUIPMENT Full cabin Additional hydraulics: 3rd and 4th valve Heater Windshield wiper Facelift model with tilt angle indicator LED work light (front) LED work light (rear) Safety light (rear) Comfort seat with lumbar support Seat heating Former Linde full-service unit Fork adjuster: hydraulic Side shifter All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of non-timely collection, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 154

Condition: used, machine/vehicle number: H2X388V00629, Year of construction: 2019, operating hours: 18,779 h, load capacity: 4,500 kg, lifting height: 3,700 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,500 kg Lifting height: 3,700 mm Fork length: 2,400 mm MACHINE DETAILS Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 2,800 mm Dead weight: 8,000 kg Battery: 80 V, 775 Ah Battery voltage in idle state: 83.1 V Service valid until: UVV valid until: 07/2027 Operating hours: 18,779 h EQUIPMENT Fork positioner with side shift Integrated scale Facelift model with tilt angle indicator Windshield with windshield wiper Roof panel Lateral fall protection White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Guedpfx Acj Ahq R Tjgoi Safety light at the rear Comfort seat with lumbar support and seat heating Hydraulic valves: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible at a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 74

Condition: used, machine/vehicle number: P21173V00135, Year of construction: 2019, operating hours: 4,538 h, load capacity: 1,600 kg, lifting height: 2,844 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 2,844 mm Fork length: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 800 x 1,915 mm Weight: 1,300 kg Battery voltage: 24 V Battery capacity: 375 Ah Battery year of manufacture: 2019 Battery voltage at rest: 24.8 V Operating hours: 4,538 h EQUIPMENT Initial lift Integrated scale Guedpfx Acs Ahrd Hjgoi Battery charger Previously a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 316

Condition: used, machine/vehicle number: 516305X00525, Year of construction: 2020, operating hours: 10,598 h, load capacity: 3,000 kg, lifting height: 4,150 mm, mast type: duplex, fork length: 2,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,150 mm Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex mast Battery voltage: 80 V Battery capacity: 620 Ah Battery year of manufacture: 2020 Battery voltage at rest: 84.9 V Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Weight: 5,100 kg Service valid until: 05/2027 UVV inspection valid until: 05/2027 Operating hours: 10,598 h EQUIPMENT Formerly a Still full-service unit Free-lift mast without a central hydraulic cylinder 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Semi-cabin with windshield wiper White, non-marking tires LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Godpfxo Ahq Uwe Acgeui Collection conditions: Side loading up to 6 t possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 155

Condition: used, machine/vehicle number: H2X392X00473, Year of construction: 2020, operating hours: 7,569 h, load capacity: 2,500 kg, lifting height: 4,600 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,600 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,200 x 2,200 mm Self-weight: 3,895 kg Next service due in: 413 h UVV certificate valid until: 06/2027 Operating hours: 7,569 h EQUIPMENT 3rd valve Side shifter Full cabin without driver's door Heater Windshield wiper LED work light, front LED work light, rear Comfort seat Lumbar support Seat heating Display of tilt angle Previously a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Gedpj Ahrcpofx Acgjui Lot number: 235

Condition: used, machine/vehicle number: 91632679, Year of construction: 2018, operating hours: 16,042 h, overall weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Drive type: Electric Battery voltage: 48 V Battery capacity: 375 Ah Battery voltage at rest: 50.5 V Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Self-weight: 1,500 kg Service valid until: 09/2027 UVV (occupational safety) certificate valid until: 09/2027 Operating hours according to display: 16,042 h Gjdpfx As Ahrf Sscgjui EQUIPMENT White, non-marking tires Road legal lighting with turn signals Previously a Jungheinrich full-service unit All dimensions are approximate. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 329

Condition: used, machine/vehicle number: 6780216, Year of construction: 2020, operating hours: 1,288 h, load capacity: 2,000 kg, lifting height: 1,500 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 1,500 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 300 Ah Battery voltage in idle mode: 25 V Dimensions & Weight Dimensions (L x W x H): 2,000 x 800 x 850 mm Weight: 850 kg UVV certification valid until: 09/2027 Service valid until: 09/2027 Operating hours: 1,288 h EQUIPMENT Folding platform Battery charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Gusdpfx Ae Ahrgwecgei Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 358

Condition: used, machine/vehicle number: H2X387V04014, Year of construction: 2019, operating hours: 12,756 h, load capacity: 2,500 kg, lifting height: 6,430 mm, fuel type: electric, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 6,430 mm Load capacity: 2,500 kg MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: Lithium-ion Battery voltage: 90 V Battery capacity: 268 Ah Battery year of manufacture: 09/2019 Measured battery voltage in idle state: 95.5 V Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,150 x 2,824 mm Dead weight: 5,256 kg Service valid until: 09/2027 UVV (Occupational Safety and Health) valid until: 09/2027 Operating hours: 12,756 h EQUIPMENT Former Linde full-service unit 3rd & 4th valve Full cabin Radio Heater Windshield wiper Tilt angle display Non-marking white tires LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety Light, front Safety Light, rear Rear view camera Fork positioner Side shifter All dimensions are approximate values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Gode Ahq Suopfx Acgsui Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of non-compliance with the collection deadline, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 87

Year of construction: 2006, operating hours: 20,000 h, condition: used, functionality: fully functional, machine/vehicle number: 114058, Used Metla Toledo Safe Line Metal detector Used for 60,000 Buns per hour Godpfey R S Izex Acgjui Taken out of commission in 2024 Air Reject system Reject Bin with Hood and sensor Belt Included Lh hand machine Rh Hand Machine

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Guodpfx Acjz Itlwsgsi Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, Equipment: type plate available, The system has been professionally dismantled and placed in storage. Viewing by appointment only. Original price: €207,000.00 1. Modular Safe Units Gsdpfsxpnwmsx Acgoui Pos. Article No. Description Qty. Unit Price (€) Total (€) Notes 1 70004226 Lampertz Modular Safe LMS 9.3 – 47U, left link 1 10,000.00 10,000.00 Housing RAL 7035, approx. 750 kg, 2 locks, 2 keys 2 70004225 Lampertz Modular Safe LMS 9.3 – 47U, center link 1 10,000.00 10,000.00 Housing RAL 7035, approx. 700 kg, 2 locks, 2 keys 3 70004224 Lampertz Modular Safe LMS 9.3 – 47U, right link 1 10,000.00 10,000.00 Housing RAL 7035, approx. 750 kg, 2 locks, 2 keys _____ 2. Additional Equipment and Electronics Pos. Article No. Description Qty. Unit Price (€) Total (€) 4 70004223 Electronic lock prepped for card reader 3 499.00 1,497.00 5 70004222 Cable feed-through in floor element 3 1,617.00 4,851.00 6 70004221 Liquid Cooling Package (LCP) 2 5,590.00 11,180.00 7 70004220 Cooling module for LCP 4 kW 4 1,090.00 4,360.00 8 70004219 LMS 47U LCP accessory kit 2 209.00 418.00 _____ 3. Cooling and Water Connections Pos. Article No. Description Qty. Unit Price (€) Total (€) 9 70003682 Primary supply line 1 1 9,560.00 9,560.00 10 70003682 Primary supply line 2 1 9,545.00 9,545.00 11 70003682 Supply line WWT + secondary 1 2,296.00 2,296.00 12 70003682 Connection fittings and WWT 1 38,075.00 38,075.00 13 70003682 Ancillary services and general 1 4,623.00 4,623.00 _____ 4. Accessories and Fittings Pos. Article No. Description Qty. Unit Price (€) Total (€) 14–18 70004217–70004213 19" blank panels (1–6U) 5 22–68 208.00 19 70004196 Special base LMS 9.3 3 699.00 2,097.00 20 70004212 19" mounting rack 47U 3 690.00 2,070.00 _____ 5. Safety & Monitoring Pos. Article No. Description Qty. Unit Price (€) Total (€) 21 70004211 DET-AC Plus Master Kit automatic fire suppression 1 3,526.20 3,526.20 22 70004195 DET-AC Plus slave devices 2 2,716.20 5,432.40 23 70004196 CMC-TC monitoring package (temperature, humidity, alarm) 1 4,030.00 4,030.00 24 70004210 LED alarm signal 24V red 1 27.00 27.00 25 70004197 Signal column connection module 1 15.00 15.00 26 70004198 CMC-TC 1U sensor unit 1 42.00 42.00 _____ 6. Power Supply & Cabling Pos. Article No. Description Qty. Unit Price (€) Total (€) 27 70004199 PSM power rail 3 130.00 390.00 28 70004200 Mounting kit for PSM 3 11.00 33.00 29 70004201 PSM 6-way cold appliance plug-in module 18 49.00 882.00 30 70004202 PSM 4-way Schuko plug-in module 3 29.00 87.00 _____ 7. Auxiliary Systems Pos. Article No. Description Qty. Unit Price (€) Total (€) 37 70004196 Modular UPS System 40kVA (three-phase) 1 38,720.00 38,720.00 38 70004207 Raised floor & frame adaptation 1 1,278.00 1,278.00 39 70004207 Electrical installation & switch cabinet UPS/air conditioning 1 7,940.00 7,940.00 42 70004209 Software license SNMP UPS shutdown 5 36.00 180.00

Condition: used, Lampertz Doku Data Safe PE12 Data Storage Cabinet Lampertz Doku Data Safe Data Storage Cabinet Valuable items compartment Doku diskette compartment Shelf with slots Hinge side on the right Fire protection class S 120 P according to EN 1047-1 2 hours of fire protection for documents and paper Resistance class 1 according to EN 1143-1 Year of manufacture: 2005 External dimensions Height: 1976 mm Width with hinge: 955 mm Depth incl. handle: 777 mm Gjdpfel Sl Ihex Acgsui Internal dimensions Height: 1714 mm Width: 734 mm Depth: 440 mm Weight: 850 kg You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 1989, Safe / Data storage cabinet, Lampertz, S 120 DIS – used: Price: €650 (net), ex works! Manufacturer: Lampertz Type: dis-data safe Year of manufacture: 1989 Test certificate: 43011 Quality class: S 120 DIS Factory number: 28069 S3 Unladen weight: 650 kg Type tested according to RAL-RG 626/7 External dimensions: Width approx. 80 cm Depth: approx. 83 cm Height: approx. 1.325 m 1 key available Gsdezv Ipijpfx Acgsui Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 2020, condition: used, functionality: fully functional, BioAir SafeMate ECO 1.8 Class II Biological Safety Cabinet – 1.8m Laboratory Workstation Manufacturer: BioAir Model: SafeMate ECO 1.8 Equipment type: Class II Microbiological Safety Cabinet Nominal size: 1.8 m Condition: Used Location: Ireland Quantity Available: 2 Description: Available for sale is a BioAir SafeMate ECO 1.8 Class II microbiological safety cabinet, designed for laboratory applications requiring controlled airflow and biological particulate containment. Guedpfjz I Dmrjx Acgoi The SafeMate ECO series features an electrically operated sliding front safety window, stainless steel internal work surfaces and HEPA filtration. The cabinet is designed to provide a controlled working environment for appropriate microbiological laboratory procedures, subject to correct installation, maintenance and certification. With a spacious 1.8 m working width, this unit is suitable for laboratories requiring a larger working area for research and routine laboratory operations. Key Features Class II microbiological safety cabinet. Large 1.8 m cabinet configuration. Stainless steel internal working area. Electrically operated sliding front window. HEPA filtration system. Designed for controlled airflow and biological containment. Suitable for research, biotechnology and pharmaceutical laboratory environments. Designed for laboratory workflows requiring a controlled working environment. Keywords: BioAir SafeMate ECO, SafeMate ECO 1.8, biological safety cabinet, Class II biosafety cabinet, Type A2 cabinet, microbiological safety cabinet, HEPA filtration, laboratory equipment, pharmaceutical laboratory, biotechnology equipment, microbiology laboratory, scientific equipment, 1800mm safety cabinet

Condition: used, This listing is for a ENVAIR Safe Comfort Plus Safety Cabinet Gjdpfxjxzgzzs Acgeui

Condition: good (used), Year of construction: 1981, Safe, vault, strongbox, armored safe, -Dimensions inside: 670/290/H855 mm -Type: 2202-78 Size 3 -Security level: D1 -Year of construction: 1981 -Dimensions: 960/1020/H1205 mm -Weight: 1900 kg Gusdpfxsv Rqzze Acgoi

Condition: used, Safe - Security Cabinet - Fireproof Safe LIPS presumably a data protection cabinet Internal dimensions: W=1080 mm, H=1500 mm, D=440 mm Presumably provides 120 minutes of fire protection - 2-door Guedexcivkjpfx Acgei - Interior with 2 shelves - Internal door for enhanced fire protection - Bolt mechanism with 3-sided locking - Key lock with one key External dimensions: W=1400 mm, D=720 mm, H=1850 mm Weight: approx. 600 kg in good condition

Condition: used, empty load weight: 6,500 kg, maximum load weight: 32,500 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 05/2020, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 90 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 70 %, color: other, Year of construction: 2020, operating hours: 231,353 h, mileage: 231,353 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 41457 Krone, SD * Year of construction: 2020 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Tail lift * Air suspension * Used tarpaulin * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) * Portal door * Air connection coupling head (red + yellow) * Duomatic air connection * 2x7-pin connection plug * 15-pin connection plug * Lifting and lowering device * Storage box / Tool box * Suspension: Air * Permissible total weight: 39,000 kg * Unladen weight: 6,500 kg * Payload: 32,500 kg * Axle manufacturer: Krone * Tire condition 1st axle: 70% -- 70% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 70% -- 70% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13620 mm, W=2480 mm, H=2680 mm * Internal volume: 91 m² * Pallet spaces: 34 * Krone Safe Curtain, tarpaulin with tail lift: BÄR Cargolift 2500kg * 231,353 km * Upon request, we will send you a video and further pictures * Krone Safe Curtain is an innovative safety and load securing tarpaulin for truck trailers. Vertically welded spring steel strips make heavy, potentially hazardous insertion slats completely redundant and provide additional protection against theft. Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles Godpfxj Af Hcke Acgsui * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, Multifunction Safety Tester KT 1880B Multifunctional Safety Tester KT 1880B – Test Automation in 6 U The KT 1880B is a compact safety tester in a 19" rack-mount format (5 U) and combines all relevant test types in one device: high-voltage testing (AC/DC), protective conductor testing, insulation testing, touch current testing, functional testing, and continuity testing. This enables the KT 1880B to meet the requirements for efficient, safe, and standards-compliant safety testing according to IEC, EN, UL, VDE, and other international standards – ideal for final testing, production, and quality assurance. Technical Performance Data - AC High-Voltage Test: 100 - 5,500 V / 0 - 3 mA - DC High-Voltage Test: 100 - 6,000 V / 0 - 10 mA - DC Insulation Measurement: 100 - 6,000 V / 250 kΩ - 1 GΩ - AC Protective Conductor Test: 10 - 30 A / 0 - 400 mΩ - AC Touch Current Test: 100 - 270 V / 0 - 10 mA - DC Continuity Test: 24 V / 0 - 600 mA - Function Test / Current Consumption AC: 4 A (Option: 1 A, 10 A, or 16 A) - Wide-Range Power Supply: 90 to 253 V / 50 Hz / 60 Hz Test Automation & Ease of Use Thanks to the integrated 4.3" TFT color display with intuitive menu navigation and freely configurable test programs, the KT 1880B enables a fully automated test sequence. The device under test only needs to be connected once – no re-wiring is required. This significantly reduces test times and potential sources of error, making it a clear advantage, especially in automated production environments. Standards Compliance & Operational Safety With a short-circuit current of 3 mA AC / 10 mA DC, the KT 1880B meets the requirements of EN 50191 for current-limited devices. As a result, it can also be operated by non-specialist personnel – ideal for companies with mixed testing staff structures. Fully Electronic High-Voltage Generator The integrated digital high-voltage generator ensures high accuracy and stable test results – even with demanding test cycles and under production conditions. Typical Application Areas - Series production & final testing - Type testing according to international safety standards - Production of electrical devices, components & modules - Automated testing environments & test benches Flexibility, Safety & Automation Combined The KT 1880B is the ideal solution for safety testing in industrial environments. With six integrated test types, fully electronic high-voltage technology, intuitive operation, and current-limited design, it meets all the requirements for modern test automation. Safety Tester KT 1880B Year of Manufacture: 2025 Manufacturer's Price: €6,545.00 (including VAT) Calibration: March 6, 2025 Remaining warranty available Accessories A3/1800-K Connection and Control Panel + CEE16 Manufacturer's Price: €1,318.00 (including VAT) Knürr TW 05 Mobile Device Cart, pre-assembled with: HL 02 Holder for High-Voltage Test Probes SP 02 / SP 03 HL 81 Holder for Protective Conductor Test Probe PE 81-i KH 01 Cable Holder Manufacturer's Price incl. Accessories: €3,300.00 (including VAT) Test Probe SP02 + SP03 Manufacturer's Price: €521.00 (including VAT) Protective Conductor Test Probe PE 81-i Manufacturer's Price: €311.00 (including VAT) Gjdpezwlfwofx Acgsui SPS D 2012 Test Dummy Manufacturer's Price: €711.00 (including VAT) Rack-Mount Housing EH 1905-y Manufacturer's Price: €653.00 (including VAT) Warning Light Set with LED WL25 Manufacturer's Price: €327.00 (including VAT) "Everything from one source: We are happy to offer you a suitable ba

Condition: used, Safeline Mettler Toledo Mobile Pipeline Metal Detector Model power supply unit: 50H, 100-240 V, 50/60 Hz, 330 W Diameter pipe: 55 mm Total dimensions: 850 mm x 420 mm x 1230 mm Guedpfx Asynbuwecgji Fully stainless steel Mobile on lockable castors

Year of construction: 2014, condition: like new (used), functionality: fully functional, machine/vehicle number: 375, The mixer is in fully working condition and has been stored in a warm and dry hall. An X-GUARD enclosure made of stainless steel, along with components of the Safety system, has been installed around the mixer. Guedpfx Acs Af Sd Degsi The mixer has been used a few times for technological tests – its condition is like new. The unit has a complete set of technical documents, including a declaration of conformity. The documentation with details of the unit’s construction is attached. Capacity: 750 liters Power: 4 kW Drum rotation speed: 2-9 rpm

Year of construction: 2020, condition: good (used), Climate-controlled safe, similar to a container – used: Price upon request! Manufacturer: unknown, can be provided later Type: unknown, can be provided later Year of manufacture: 2020 Dimensions: unknown, can be provided later Door: Manufacturer: Climate-controlled safe, similar to a container Type: Strongroom door Gjdjzd Tmpepfx Acgoui CWT085L Year of manufacture: 2020 Cert, mark No. 335 Resistance grade: III Weight (kg): 873 kg Includes PIN input field, dorma Kaba Condition: good Available: immediately Location: Mainz area

Condition: used, Safe - Strongroom STRACKE Security level / resistance grade III 1 key lock VDS class 2(B) Godpewki A Aofx Acgoui 1 mechanical code lock 2(B) with reinforced keyhole protection Internal dimensions: W=650 mm, H=1300 mm, D=445 mm Interior with partition wall and collecting device - Bolt system with 3-way locking - Key lock with one key (2 keys available) - With deposit chute Ø 160 mm - 19 deposit containers made of plastic Ø140 x 270 mm - Operating manual External dimensions: W=790 mm, D=675 mm, H=1440/1800 mm Weight: 1330 kg