Used Lynette for sale (139)

Year of construction: 1987, condition: used, centre height 390 mm Isdpfehgw Uxox Aacotn passage of steadyrest 220 mm chucking diameter 400 mm total power requirement / kW

Condition: used, bed width 220 mm daylight 130 mm centre height 240 mm dimensions of the machine ca. 0,5 x 0,3 x 0,15 m weight ca. 20 kg Additional lynette available upon request - Photo 2. Iodpfexn Tw Aox Aacstn Machine dealer with own stock of 2500 m².

Condition: excellent (used), Steady rest suitable for VDF V5, SPH 345 mm, dimensions as shown in the last picture. Itsdpfxswz Rdvj Aacon

Condition: used, Year of construction: 1970, centre height 620 mm Isdpfx Aog Si R Roacjtn hollow max. 400 mm weight of the machine ca. 200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2000, swing diameter 530 mm 0 620 mm Wheel width 20 mm roll diameter 45 mm Itodjwdiwtopfx Aacsn total power requirement ohne kW weight 250 kg dimensions of the machine ca. 1,2 x 0,30 x 1,3 m

Condition: used, swing diameter / mm total power requirement / kW weight of the machine ca. / t Center height: approx. 280mm dimension Length: 1300mm Width: 300mm Height: 560mm Weight: 265kg Isdpfoia Rrksx Aacotn

Year of construction: 1980, condition: used, Weiler W2 hollow 280 mm centre height 440 mm bed width 320 mm weight of the machine ca. 200 kg Itodpfjfgv Dgsx Aacen +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Bezel, stick, lynette -Max. Passage: Ø 240 mm -Tip height: 380 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 700/160/H830 mm Isdpfx Aasdcpixscetn -Weight: 120 kg

Condition: ready for operation (used), Year of construction: 1977, Available immediately from insolvency: Stanko Lathes (longitudinal and transverse) Type 16 K 20 Itjdexn R Dmepfx Aacsn Year of manufacture: 1977 Retrofit and digital readout in 2012 Centre height: 200 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 55 mm Spindle speeds: 12.5 – 1600 rpm Drive: 7.5 kW Chuck Tailstock Coolant system Multifix tool holder with inserts Digital readout Steady rest (Lynette) Weight: 2700 kg Priced at EUR 2,500 plus VAT ex works

Condition: good (used), LynetteTip height 330 mmDiameter 185 mmFoot length 330 mmFoot width 140 mmg.width 600 mmg.height 650 mm Isdod S Algepfx Aacstn

Condition: reconditioned (used), Year of construction: 2012, Cycle-controlled lathe WEILER E 40 Itsdpfswk I Anex Aacon With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2012 Spindle bore: 66 mm Center distance: 1000 mm Turn over bed: 435 mm Turn over cross slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm continuously variable With the following accessories: Sliding guard with interior lighting 8-station SAUTER turret with AGW and tool drive C axis via main drive 3 x VDI 30 live tools 3-jaw FORKARDT chucks Ø 250 mm 1 x fixed lynette Ø 120 mm Tailstock with extendable drilling sleeve Coolant system Coolant spray gun Chip collection tray 5 x Height-adjustable machine mounts Operating instructions THE MACHINE IS IN VERY GOOD CONDITION!! THE MACHINE WAS ONLY USED FOR TRAINING!! THE MACHINE HAS ONLY 9044 OPERATION HOURS!!!

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, Isdpfoxcbktex Aacstn - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: used, Year of construction: 1979, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Empty weight: 8.000 kg Price: On request Metal turning lathe Model: Conventional Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Itedpfxownhf Re Aacon Including 4-jaw-chuck + lynette Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Machine has been tested, in very good condition Video is available - Drive system: Conventional - Power [kW]: 22.0 - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Year: 1979 - Documentation available: No - Serial number: 0429412 - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Bezel, moving bezel, bezel, steady rest, lynette Itodexn I Tlspfx Aacen -Bezel: moving -Centre height: 185 mm -Edition: Brass -Dimensions: see photos / technical drawing -Dimensions: 345/70/H370 mm -Weight: 7.7 kg.

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed Itodpfxew Uf Hwo Aacen - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Year of construction: 1977, condition: used, workpiece weight 279 KG length ca. von Bett bis Lynette mm 189 € . Iodpfxsrfd U Rs Aacjtn max durchlass 369 mm

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Isdouzyw Dopfx Aacjtn Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C Isdjxb Efrepfx Aacjtn max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: good (used), Bezel, steady rest, lynette Itodpfxoxfgwdj Aacsn -Bezel: max. aperture Ø 75 mm -Type: 36642.M44 -Centre height: approx. 125 mm see photos -Dimensions total: 135/310/260 mm -Weight: 7.3 kg

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 Ijdpslzm Eqjfx Aacotn tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: good (used), Bezel, steady rest, lynette Ijdeuqf Nvspfx Aacjtn -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm -Weight: 4.1 kg / 3.9 kg

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm Itedeiv Irljpfx Aacsn - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: good (used), Bezel, stick, lynette Itsdpfx Aod S Nmkeacjn -max. Passage: Ø 30 mm -Tip height: 175 mm -Drawing: in the photos -Dimensions: 425/130/H390 mm -Weight: 10.8 kg

Condition: good (used), Bezel, steady rest, lynette -max. passage: Ø 210 mm Itodpjd S Iyxefx Aacsn -Centre height: 390 mm -technical drawing: in the photos -Dimensions: 600/125/H625 mm -Weight: 53.5 kg

Condition: good (used), Bezel, steady rest, lynette -Bezel: with substructure, max. passage Ø 265 mm -Centre height: 340 mm -Edition: Brass Isdpfxow S T Ide Aacstn -technical drawing: in the photos -Dimensions: 660/130/H900 mm -Weight: 122 kg