Used Stanko for sale (38)

Condition: used, Year of construction: 1981, Technical details: grinding diameter: 240 mm grinding length: 700 mm centre height: 125 mm table length: 1525 (schwenkbar) mm distance grinding spindle - table min./max.: 225/410 mm rpm speed range - grinding wheel: 1590 U/min grinding wheel dia. (unused wheel): 600 mm grinding wheel dia. (used wheel): 450 mm cutting speed: 50 m/s total power requirement: 13 kW weight of the machine ca.: 5,5 t space requirements of the machine approx.: L:2,8xB:2,2xH:1,8 m Cylindrical grinding machine, semi-automatic operation - grinding spindle head -adjustment 185mm Fodju Ng Avopfx Aikopp - grinding spindle head-infeed 0,001-0,05 mm/min continuous - rotation workpiece 50-500 rpm continuous machine is equipped: - sleeve with hydr. retraction - cooling device - trueing device - grinding wheel balancing - transverse delivering device for grinding spindle head - hydr. adjustment of grinding table. Upper table swivable. Documentation i.D. *

Condition: good (used), Manufactured by: Stanko Tilt table Table size: 560 x 560 mm Design: 400 mm Maximum cutting height: 240 mm Belt length: 3150 mm Fpsdpfx Aiev S Ukvekep Adjustable speed

Condition: new, Year of construction: 2027, Machine in LIKE-NEW condition! Geometry inspection according to DIN 8609 12-month warranty for all damages Fpedpfscht Tnsx Aiksp Control system: conventional / Siemens PLC with rotary table control 4-axis digital display from Fagor / ACU-RITE or Heidenhain Complete electrical equipment 230/400 V, 50 Hz, German manufacturer, CE standard Technical data: Max. workpiece dimensions: - Diameter mm 3200 - Height mm 1600 (up to 2600 possible*) Max. workpiece weight kg 16000 Rotary table diameter mm 2800 Max. travel length - horizontal mm 1720 - vertical mm 1200 Number of steps for rotary table indexing 18 Rotary table speeds Siemens PLC or stepless (2 steps) Lenze control rpm 1.6-63 / 0-80 Support working feed: number of steps 18 Speed of cross slide adjustment mm/min 360 Max. support rapid traverse speed mm/min 2000 Max. rotary table torque kN/m 67 Power of main drive kW 55/75 Dimensions (L x W x H) mm 5490 x 7075 x 5100 Weight kg 43,000

Condition: excellent (used), Steel holder inserts Make Stanko/Sedin Fjdpfovmf Axjx Aikopp Data, see pictures

Condition: used, Year of construction: 1972, Dreh-Øüber Bett 400 mm Dreh-Øüber Support 220 mm turning length 1000 mm spindle turning speed range 12,5 - 2000 U/min spindle taper Bajonett 55022 spindle bore 47 mm feeds - longitudinal 0,07 - 4,16 mm/U feeds - cross 0.035 - 2,08 mm/U thread - mm pitch mm thread - inch 2 - 24 Gang/ inch. rapid travel - longitudinal/face 3,4 / 1,7 m/min spindle drive 11 kW power capacity 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, Fpjdpfx Aievzhhyskop • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis Fodpfju N D Rqjx Aikspp - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: ready for operation (used), Year of construction: 1978, Drilling capacity Ø 50 mm, table size 1000x1640 mm, spindle nose MT-5, quill stroke 400 mm, quill Ø 80 mm, outreach 1755 mm, nose to table 450-1600 mm, 21 speed 20-2000 rpm., motor 4 KW, 12 feeds, dimensions 2700x1100x3430 mm, weight ca. 4800 kg Fpodpfx Aed Sw N Asikjp

Condition: used, Technical details: weight: 150 kg dimensions: L:280 x B:240 x H:180 / pro Pratze mm These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping stroke 250mm Foot mounting: Surface L x W: 280 x 240mm, 4x clamping screw M24 Fedeu N E Azepfx Aikopp Equipment 4x slotted screw per clamping claw and socket spanner for square 24mm *

Condition: used, Year of construction: 1979, Technical details: throat: 410 mm dimension machine xH: 1,15m x 0,8m x 2,0m m Vertical band saw with saw band welding device. The table is tiltable. Fpjdpfx Aisu Niu Usksp *

Condition: used, Year of construction: 1993, x-travel 0500 mm Fpodpfxj Aiirbe Aikop y-travel 400 mm z-travel 420 mm table-size 800 x 400 mm feed range 1- 3000 mm/min rapid traverse 0,083- 5 m/min Tool bore ISO 40 turning speed range 20- 4000 U/min main drive DC 5 kW CNC control 355 HH total power requirement 10,9 KW weight of the machine ca. 2300 kg dimensions of the machine ca. 2,5 x 2,5 x 2,0 m CNC milling machine with Heidenhain TNC 355 Control and housing arround working area.

Condition: used, Universal boring head STANKO Spindle tool, spindle head Tool holder: SK 40 - M16 Adjustment bushing holder: Ø 36 mm Adjustment range: 17.5 mm Adjustment accuracy: 0.01 mm Tool shank: Ø 18/22 mm Machining diameter: approx. 10-45 mm - Adapter SK40 to adjustment bushing Ø 36 mm - Boring head with adjustment bushing shank Ø 36 mm Net weight: 5 kg Very good condition Fedpfx Aisxciv Dekopp

Condition: used, Keyway milling head for milling machine, milling head, CCCP / USSR STANKO Type 1502 No.: 200 Year of manufacture: 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is the same as for the standard vertical head, driven by the machine gearbox - Drive via a drive pin, centered within the centering diameter - Graduated scale on the flange plate, +/- 45° infinitely adjustable - This keyway milling head is flanged in place of the standard vertical milling head (Mounting in place of the vertical milling head) Weight: 42 kg Good condition Fpedjd Dk A Ajpfx Aiksp Keyway milling head, bearing number 58166, and vertical milling head, bearing number 58164, from an identical STANKO milling machine.

Condition: excellent (used), spherical roller bearing -Bearing type: Spherical roller bearing -Bore: Ø 110 mm -Outer diameter: 200 mm -Width: 53 mm Fpsdpob A Iq Ssfx Aiksp -Weight: 7.5 kg