Used Kasto Hbs 1 for sale (127)

Condition: used, Year of construction: 2005, cutting diameter 210 mm band length 400 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 240 x 190 mm cutting speed 16/32 m/min total power requirement 1,1 kW weight of the machine ca. 180 Kg Hnjdpfx Aoxz Hhbog Uog dimensions 1,2 x 0,8 x 1,0 m Hydraulic hacksaw with: - Coolant device - good condition

Condition: good (used), Year of construction: 2014, Hacksaw, hacksaw machine -Manufacturer: Kasto, Semi-automatic hacksaw with coolant system and stop -Type: KASTO hbs 2 -Power: 1.3 kW -Cutting direction: Straight and miter cuts with pendulum clamping device -Cutting area at 90 degrees flat: 280 x 200 mm / round Ø 250 mm -Cutting area at 45 degrees flat: 170 x 170 mm / round Ø 180 mm -Max. cutting height: 200 mm -Max. cutting width: 280 mm -Cutting speed: 2-stage, stroke rate 62 / 125 strokes/min -Saw feed: infinitely variable -Automatic end-of-line shutdown Hnsdpex Sdrbefx Ag Ueg -Machine dimensions: 1390/900/H920 mm -Transport dimensions: 1390/490/H920 mm -Weight: 222 kg

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm Hnedpfx Aeuqgbteg Uog flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Condition: used, Year of construction: 1975, cutting diameter 150 mm band length 300 mm cutting range - flat - 170 x 150 mm strokes per minute 85 / 170 cutting speed 16 / 32 m/min dimensions of saw-blade 300 x 30 x 1,5 mm work height max. 695 mm Hnsdpjwntygofx Ag Ujg total power requirement 1 kW weight of the machine ca. 0,169 t dimensions of machine L x W x H 0,77 x 0,70 x 1,33 m Accessories: coolant

Year of construction: 2022, condition: as good as new (ex-display), Hacksaw Make: KASTO Model: KASTOhbs 2 Machine No. 1132 106 517 Year of manufacture 2023 - Demonstration machine Cutting speed: 16/32 m/min. with warranty equipped as standard with: - two cutting speeds - saw feed, infinitely variable - Pendulum vice - Automatic limit stop Hnedpjfgg Tpjfx Ag Ueg - Coolant device - Operating instructions

Condition: used, Year of construction: 1988, 370 mm rund ja möglich Hodeupmwrepfx Ag Uong

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details cutting diameter 280 mm saw band length 4930 mm cutting width 280 mm capacity 90 degrees: square 280 x 280 mm saw diameter min. 10 mm cutting length min. 6 mm Weight of Material maxium 400 kg/m cutting speed 20 - 110 m/min Hnodpfjx Uy Tmjx Ag Uog sawing motor 2,2 kW dimensions of saw-band 4930 x 34 x 1,1 mm total power requirement 7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2280 x 2680 x 2050 mm Additional information Shortest Remaining Piece Length in Single Cut 15 mm Shortest Remaining Piece Length in Automatic Operation 80 mm Feed Length 700 mm Multiple Feed Length 9999 mm Cutting Speed Infinitely Variable 20-110 m/min Cutting feed: Infinitely variable Material clamping: Hydraulically infinitely variable, clamping pressure: 20-60 bar Equipment: CNC control Machine roller conveyor, dimensions: 2000 x 550 x 700 mm, weight: approx. 150 kg Machine documentation

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 Hodeu R R Avjpfx Ag Ueng 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kasto KASTOwin A 3.3 Fully Automatic Metal Bandsaw (2017) Manufacturer: Kasto Model: KASTOwin A 3.3 Metal Bandsaw Year of manufacture: 2017 Condition: used, under power Hnedpfx Aeyab Uueg Usg Further information available upon request. Cutting range: 330 mm Cutting area [H x W]: 330 x 350 mm Multiple feed: 9,999 mm Saw band dimensions: 5,090 x 34 x 1.1 mm Cutting speed, stepless: 12 – 150 m/min Saw motor, frequency controlled: 4.0 kW Material support height: 700 mm Length: 1,350 mm Width: 2,380 mm Height: 1,850 mm Weight: 2,200 kg

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Hsdpfsv Sfp Asx Ag Uong Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 6017107001, type of input current: three-phase, cutting range round steel at 90°: 530 mm, overall weight: 2,000 kg, Used bandsaw from Kasto. Currently located in 47809 Krefeld and can be inspected there by appointment. Hedpex Tp D Esfx Ag Usng Loading via overhead crane possible!

Condition: used, Year of construction: 1987, Technical details: Hodpovb Dqqofx Ag Usng cutting diameter: 520 mm saw band length: 7239 mm cutting width: 520 mm sawing motor: 5,5 kW cutting speed: 20 - 130 m/min cutting width at rectangle material: 520 mm total power requirement: 9,5 kW weight of the machine ca.: 3,8 t Machine with multi feed device chip conveyor infeed roller stand *

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto EasyControl saw band speed 12 - 120 m/min total power requirement 30 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Machine is in good condition. On 7th. October 2025 the bearings of the roller wheel (belt tensioning side) have been replaced by KASTO and the switch for the belt tension was replaced. The machine can be demonstrated under power in our warehouse. Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Hnodex Uywrepfx Ag Uog Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6459105039, saw band length: 4,530 mm, saw band width: 34 mm, total height: 1,568 mm, total length: 1,755 mm, total width: 2,149 mm, cutting range round steel at 90°: 260 mm, table height: 700 mm, power: 5 kW (6.80 HP), saw blade length: 4,530 mm, empty load weight: 1,700 kg, Fully hydraulic production band saw for continuous operation, suitable for cutting materials ranging from easy to difficult to machine such as solid stock, tubes, and profiles. Modern, precise linear guides ensure high stability and maximum service life. A special feature of this machine is the dual bearing of the driven flywheel. This design provides ideal bearing alignment and thus optimal support for the driven flywheel. The standard KASTO Basic Control system allows for intuitive and efficient machine operation. Up to 98 jobs (length/quantity combinations) can be programmed. Once the set quantity is reached, the machine automatically shuts off. The material feed unit positions the material length with high precision via a ball screw. A frequency-controlled drive with bevel gears, jam protection, bandsaw breakage protection, and clamping force control are included as standard features. These ensure perfect operation for both single cuts and small to medium batch runs. KASTO’s universal hydraulics ensure optimal cutting results and long band saw blade life. Technical data: Saw capacity round [mm]: 260 Saw capacity square [mm]: 260 x 260 Saw capacity rectangular [mm]: 260 x 260 Maximum feed length [mm]: 750 with repeat function [mm]: 9,999 Shortest cut length [mm]: 6 Minimum cut diameter [mm]: 10 Remnant length: Semi-automatic operation [mm]: 15 Automatic operation [mm]: 100 Power: Saw motor power [kW]: 3 Total power [kW]: 5 Infinitely variable cutting speed [m/min]: 20–110 Saw blade: Saw blade dimensions [mm]: 4530 x 34 x 1.1 Dimensions and weights: Table height [mm]: 700 Hnedpex Sdyrsfx Ag Usg Length [mm]: 1,755 Width with chip conveyor [mm]: 2,475 Width without chip conveyor [mm]: 2,149 Height (saw frame bottom) [mm]: 1,568 Weight [kg]: 1,700

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Hjdpfewk D Efox Ag Uong Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Hnjdpexpymajfx Ag Ueg Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, overall weight: 2,700 kg, total height: 1,900 mm, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Hnsdpex Rpdyjfx Ag Ueg Machine Depth 4800 mm

Condition: ready for operation (used), Year of construction: 1986, saw band length: 450 mm, cutting height (max.): 280 mm, cutting capacity 280 mm band length 450 mm double hydraulic vise Hjdjxbhm Sopfx Ag Ueng

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Hjdpfx Agswuqbbs Uong Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Hsdpfxowvbk As Ag Ujng Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm *

Condition: used, cutting diameter 320 mm saw band length 6300 mm cutting range 420 x 320 mm control Siemens Simatic HMI cutting speed 20 - 130 m/min height of material-table 950 mm total power requirement 15 kW weight of the machine ca. 2920 kg dimensions of the machine ca. 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar Hnedpexb Edujfx Ag Uog - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation

Condition: used, Bandsaw with infeed and outfeed conveyor Hsdpfx Agex Hx Ads Usng Make: KASTO

Condition: good (used), Year of construction: 1990, machine/vehicle number: 103 2583310, Offer 25326 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: Hnsdpfxjx Sxx Ao Ag Ueg - Round: 130 mm - Square: 120 mm - Rectangular: 300 x 40 mm or 240 x 80 mm - Cutting capacity at 45°: - Round: 130 mm - Square: 110 mm - Rectangular: 245 x 40 mm - Mitre adjustment left & right each 0–90° - 2 cutting speeds - Drive: 400 V / 1.26 / 2.5 kW - Saw blade feed rate hydraulically infinitely adjustable - Coolant system - Required space approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Infeed and outfeed roller conveyors with length stop, each 6000 mm

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, The USED MACHINE KASTO 260/400 U is a single miter band saw capable of cutting round material up to a diameter of 260 mm and square material up to 260 x 400 mm. Material is fed and clamped manually. The saw frame is raised hydraulically, while the cutting feed is performed automatically by a hydraulically controlled downfeed cylinder. Infinitely variable cutting speed via variator gearbox. Technical Data: • Cutting range: 90° round: 260 mm; rectangular: 260 x 400 mm 45° round: 260 mm; rectangular: 260 x 260 mm • Motor power Power supply approx. 3.2 kW / 400 V / 50 Hz Saw motor approx. 2.2 kW / 400 V / 50 Hz • Blade speed 18 to 110 m/min. (stepless) • Working height 835 mm • Minimum remnant piece length approx. 20 mm (90°) • Saw blade 4310 x 27 x 0.9 mm • Dimensions (in operation) 2410 x 1805 x 913 mm • Weight 920 kg Hjdpfox Sx D Eox Ag Ujng Standard Equipment • Hydraulic control of the cast iron saw frame • Saw blade drive via variator • Stepless saw blade speed adjustment from 18 to 110 m/min • Saw frame height limit • Driven chip removal brush • Electric blade tension monitoring with blade breakage detection • Carbide saw blade guides and guide rollers • Cutting pressure regulation (solid material – tube) • Sturdy base with coolant tray • Bi-metal saw blade M 42

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m Hsdjxb Edzjpfx Ag Usng total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation